ORCID as entered in ROS
https://orcid.org/0000-0003-4011-2771
Select Publications
Conference Papers
, 2014, 'Experimental investigation into the mechanical behavior of Gosford sandstone at different sizes', in Labuz J; Detournay E; Pettitt W; Petersen L; Sterling R (eds.), Proceedings 48th US Rock Mechanics/Geomechanics Symposium, Minneapolis, USA, presented at
, 2014, 'Experimental study of the shear behaviour of rock joints under constant normal load and constant normal stiffness conditions', in Labuz J; Detournay E; Pettitt W; Petersen L; Sterling R (eds.), Proceedings 48th US Rock Mechanics/Geomechanics Symposium, Minneapolis, USA, presented at
, 2014, 'A review of ground support systems performance subjected to dynamic loading', in Alajano A; Perucho A; Olalla C; Jimenez R (eds.), Rock Mechanics and Rock Engineering: structures on and in rock masses, CRC Press, Vigo, Spain, pp. 1063 - 1068, presented at
, 2014, 'The load transfer mechanics of fully grouted cable bolts: a theoretical analysis', in Alejano A; Perucho A; Olalla C; Jimenez R (eds.), Rock Mechanics and Rock Engineering: structures on and in rock masses, CRC Press/Balkema, Vigo, Spain, pp. 1045 - 1050, presented at
, 2014, 'An assessment of the correlation between the strength and cuttability of rock', in Proceedings 14th Coal Operators' Conference, Univesity of Wollonong, Wollongong, pp. 186 - 192, presented at
, 2014, 'The load transfer mechanism of fully grouted cable bolts under laboratory tests', in Proceedings 14th Coal Operators' Conference, University of Wollongong, Wollongong, pp. 137 - 146, presented at
, 2014, 'The size effect of rock samples used in anchorage performance testing of cable bolts', in Proceedings 14th Coal Operators' Conference, University of Wollongong, Wollongong, pp. 128 - 136, presented at
, 2013, 'An investigation of the corrosive impact of groundwater on rock bolts in underground coalmines', in Hagan P; Saydam (ed.), AusRock 2014: Third Australasian Ground Control in Mining Conference. Proceedings, Australasian Insitiute of Mining & Metallurgy, Sydney, Australia, pp. 277 - 286, presented at
, 2013, 'Environmental characterisation of the stress-corrosion cracking of rockbolts in underground coal mines via laboratory and in-situ testing', in Kwasniewski M; Lydzba D (ed.), Rock Mechanics for Resources, Energy, and Environment (EUROCK 2013), CRC Press/Balkema, London, pp. 261 - 266, presented at
, 2013, 'Numerical investigation of asperity degradation in the direct shear test of rock joints', in Kwasniewski M; Lydzba D (ed.), Rock Mechanics for Resources, Energy, and Environment (EUROCK 2013), CRC Press/Balkema, London, pp. 391 - 397, presented at
, 2013, 'Application of acoustic emission tomography technique in concrete', in Proceedings 2nd International Conference on Civil, Architecture and Hydraulic Enginering, Zhuhai, China, presented at
, 2013, 'A modified failure criterion with scale effect parameter', in Proceedings 47th US Rock Mechanics / Geomechanics Symposium 2013, San Francisco, USA, presented at
, 2013, 'The effect of joint frequency on a discontinuous rock mass under experimental compressive strength testing conditions', in Proceedings 47th US Rock Mechanics / Geomechanics Symposium 2013, San Francisco, USA, presented at
, 2013, 'Comparison of estimated and actual measured face pressure in EPM-TBM tunnelling', in Underground - the way to the future, CRC Press, Geneva, presented at
, 2013, 'Metallurgical examination of rockbolts failed in service due to stress corrosion cracking', in Proceedings 7th International Symposium on Ground Support in Mining and Underground Construction, Australian Centre for Geomechanics, Perth, pp. 473 - 484, presented at
, 2013, 'Changes in rock properties following immersion in various chemical solutions', in Aziz N (ed.), Proceedings of the 2013 Coal Operators Conference, University of Wollongong, Wollongong, Australia, pp. 400 - 405, presented at
, 2013, 'Analytical study on effect of weak layer on long-term behaviours of tunnel', in Proceedings 5th AUN/SEED-Net Regional Conference on Geological Engineering, University Malaya, Kuala Lumpa, presented at
, 2012, 'Advanced understanding of the mechanism of air-deck blasting: a numerical approach', in Proceedings 10th International Symposium on Rock Fragmentation by Blasting, CRC Press, New Delhi, India, pp. 391 - 396, presented at
, 2012, 'Effect of loading rate on strength and failure process of frozen welded tuff', in Proceedings 7th Asian Rock Mechanics Symposium, Korean Society for Rock Mechanics, Seoul, Korea, presented at
, 2012, 'The effect of discontinuities in uniaxial compressive strength testing of rock', in Proceedings 7th Asian Rock Mechanics Symposium, Korean Society for Rock Mechanics, Seoul, Korea, presented at
, 2012, 'Selection of an optimum truck and shovel fleet based on effective flat haul and capacity constraint modelling', in Proceedings of 8th Open Pit Operators' Conference, AusIMM, Perth, presented at
, 2012, 'The contribution of air-deck blasting to open pit mining economics', in Proceedings of 8th Open Pit Operators' Conference, AusIMM, Perth, presented at
, 2012, 'Development and future aspect of acoustic emission data processing methods', in Proceedings 30th European Conference on Acoustic Emission Testing, Granada, Spain, presented at
, 2012, 'Coupon testing for field assessment of stress corrosion cracking of rockbolts', in Proceedings 31st International Conference on Ground Control in Mining, Morgantown, WV, USA, presented at
, 2012, 'Experimental study of size effects of rock on UCS and point load tests (CD Paper No. 215)', in Proceedings 46th US Rock Mechanics/Geomechanics Symposium, Curran Associates, Inc./ARMA, Chicago, USA, pp. 2561 - 2568, presented at
, 2012, 'Stress corrosion cracking failure of rockbolts in underground mines in Australia', in Proceedings 7th International Symposium on Rockbolting and Rock Mechanics in Mining, Aachen, Germany, pp. 335 - 348, presented at
, 2012, 'Analysis of the Macquarie monorail system in development of gate roads at Mandalong Mine', in Proceedings 2012 Coal Operators' Conference, University of Wollongong, Wollongong, pp. 103 - 109, presented at
, 2012, 'Experimental protocol for Stress Corrosion Cracking of rockbolts', in Proceedings 2012 Coal Operators' Conference, University of Wollongong, Wollongong, pp. 130 - 137, presented at
, 2012, 'The effect of certain chemical solutions on some material properties of clay bearing rocks', in Harmonising Rock Engineering and the Environment - Proceedings of the 12th ISRM International Congress on Rock Mechanics, pp. 623 - 626
, 2011, 'The effect of certain chemical solutions on some material properties of clay bearing rocks', in Qian ; Zhou (ed.), Harmonising Rock Engineering and the Environment, Taylor and Francis Inc., Philadelphia, PA, United States, pp. 305 - 308, presented at
, 2011, 'Improvements in gate road development rates using a monorail systems', in Mining Education Australia Research Projects Review 2011, Australasian Institute of Mining and Metallurgy, Melbourne, pp. 26 - 30, presented at
, 2010, 'Australian rock bolt steel chemistry and stress corrosion cracking', in Second Australasian Ground Control Conference 2010, The Australasian Institute of Mining and Metallurgy, Victoria, 3125, pp. 79 - 84, presented at
, 2009, 'A collaborative approach to mining education in Australia', Barcelona, Spain, presented at
, 2009, 'Enhanced student collaboration in mining engineering through peer review of major projects', Barcelona, Spain, pp. 501 - 519, presented at
, 2009, 'Stress corrosion of rockbolts in Australian coal mines', in Proceedings CD 43rd US Rock Mechanics Symposium & 4th US-Canada Rock Mechanics Symposium, American Rock Mechanics Association (ARMA), Asheville, NC USA, presented at
, 2009, 'The effect of stylus hardness and some test parameters on CERCHAR Abrasivity Index', in Proceedings CD 43rd US Rock Mechanics Symposium & 4th US-Canada Rock Mechanics Symposium, American Rock Mechanics Association (ARMA), Asheville, NC USA, presented at
, 2009, 'A study of the effect of moisture content on rock cutting performance', in Coal 2009, Proceedings 9th Underground Coal Operators Conference, AusIMM, Melbourne, Vic, pp. 340 - 347, presented at
, 2009, 'An assessment of the impact of stylus metallurgy on CERCHAR Abrasiveness Index', in Aziz N; Nemcik J (ed.), Coal 2009, Proceedings 9th Underground Coal Operators Conference, AusIMM, Melbourne, Vic, pp. 348 - 355, presented at
, 2009, 'Changes in acoustic emissions when cutting different rock types', in Coal 2009, Proceedings 9th Underground Coal Operators Conference, AusIMM, Melbourne, Vic, pp. 329 - 339, presented at
, 2007, 'Improvements in truck and shovel scheduling based on capacity constraint modelling', in 6th Large Open Pit Mining Conference, 2007, Perth, WA, pp. 87 - 91, presented at
, 2006, 'Capacity constrained production scheduling', in 15th International Symposium on Mine Planning and Equipment Selection, Torino, Italy, presented at
, 2006, 'A laboratory facility to study the behaviour of reinforced elements subjected to shear', in 7th Underground Coal Operator`s Conference, Wollongong, NSW, pp. 245 - 254, presented at
, 2006, 'Observations on the variation in acoustic emissions with changes in rock cutting conditions', in 7th Underground Coal Operator`s Conference, Wollongong, NSW, presented at
, 2005, 'A study on the effects of changes in fibre type & dosage rate on fibre reinforced shotcrete performance', in 2nd International Conference on Engineering Developments in Shotcrete, Taylor and Francis Group, London, pp. 103 - 108, presented at
, 2005, 'Development of a laboratory facility for testing shear performance of installed rock reinforcement tendons', in Proceedings of the Ground Control in Mining Conferences, Morgantown, Virginia, USA, pp. 357 - 365, presented at
, 2004, 'Variation in the load transfer of fully encapsulated rockbolts', in Proceedings of the Ground Control in Mining Conference, Morgantown, WV, USA, pp. 242 - 249, presented at
, 2003, 'Observations on the differences in load transfer of a fully encapsulated rockbolt', in 1st Australian Ground Control in Mining Conference, Sydney, presented at
, 2003, 'A study of the variability in some rockbolt parameters & their potential impact on anchorage performance in coal mines', in Mining Risk Management Conference, Sydney, presented at
, 2003, 'The effect of resin annulus on anchorage performance of fully encapsulated rockbolts', in 10th Congress of the International Society of Rock Mechanics, Johannesburg, South Africa, presented at
, 1992, 'The cuttability of rock using a high pressure water jet', in Proceedings of the Western Australian Conference on Mining Geomechanics, Western Australia School of Mines, Kalgoorlie, pp. 399 - 411, presented at
Filter by type
https://orcid.org/0000-0003-4011-2771