ORCID as entered in ROS

Select Publications
2018, 'The effect of confining pressure and water content on energy evolution characteristics of sandstone under stepwise loading and unloading', Advances in Civil Engineering, 2018, http://dx.doi.org/10.1155/2018/4751612
,2018, 'A new laboratory short encapsulation pull test for investigating load transfer behaviour of fully grouted cable bolts', Geotechnical Testing Journal., 41, pp. 435 - 447, http://dx.doi.org/10.1520/GTJ20170139
,2018, 'Scale-size dependency of intact rock under point-load and indirect tensile Brazilian testing', International Journal of Geomechanics
,2018, 'Mechanical Performances of Pressure Arch in Thick Bedrock during Shallow Coal Mining', Geofluids, 2018, http://dx.doi.org/10.1155/2018/2419659
,2018, 'Pressure-Arching Characteristics in Roof Blocks during Shallow Coal Mining', Advances in Civil Engineering, 2018, http://dx.doi.org/10.1155/2018/6817059
,2017, 'Back-calculation of failure stress of rockbolts affected by Stress Corrosion Cracking in underground coal mines', International Journal of Rock Mechanics and Mining Sciences, 100, pp. 310 - 317, http://dx.doi.org/10.1016/j.ijrmms.2017.10.029
,2017, 'Sample diameter effect on bonding capacity of fully grouted cable bolts', Tunnelling and Underground Space Technology, 68, pp. 238 - 243, http://dx.doi.org/10.1016/j.tust.2017.06.004
,2017, 'A constitutive model for load-displacement performance of modified cable bolts', Tunnelling and Underground Space Technology, 68, pp. 95 - 105, http://dx.doi.org/10.1016/j.tust.2017.05.025
,2017, 'Mechanical behaviour of fully-grouted bolt in jointed rocks subjected to double shear tests.', DYNA - Ingeniería e Industria, 92, pp. 314 - 320, http://dx.doi.org/10.6036/8325
,2017, 'Environmental influence on mesh corrosion in underground coal mines', International Journal of Mining, Reclaimation and Environment, http://dx.doi.org/10.1080/17480930.2017.1299604
,2017, 'Size-dependent Hoek-Brown failure criterion', International Journal of Geomechanics, 7, http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000706
,2017, 'Experimental study on deformation and strength characteristics of sandstone with different water contents', Journal of Engineering Science and Technology Review, 10, pp. 199 - 203, http://dx.doi.org/10.25103/jestr.104.24
,2017, 'Numerical investigation into the effect of backfilling on coal pillar strength in highwall mining', International Journal of Mining Science and Technology, 28, pp. 281 - 286, http://dx.doi.org/10.1016/j.ijmst.2017.07.003
,2016, 'Parametric study of rockbolt shear behaviour by double shear test', Rock Mechanics and Rock Engineering, http://dx.doi.org/10.1007/s00603-016-1063-4
,2016, 'Skewed pressure characteristics induced by step-by-step excavation of a double-arch tunnel based on infrared thermography', Technical Gazette, 23, pp. 827 - 833, http://dx.doi.org/10.17559/TV-20151217142924
,2016, 'Experimental and numerical study of asperity degradation in the direct shear test', Engineering Geology, 204, pp. 41 - 52, http://dx.doi.org/10.1016/j.enggeo.2016.01.018
,2016, 'The effect of changes in tool tip angle on the cutting performance of a pointed pick', Mining Technology: Transactions of the Institutions of Mining and Metallurgy: Section A, http://dx.doi.org/10.1080/14749009.2016.1159056
,2016, 'Shear resistance contribution of support systems in double shear test', Tunnelling and Underground Space Technology, 56, pp. 168 - 175, http://dx.doi.org/10.1016/j.tust.2016.03.011
,2016, 'Incorporating scale effect into a multiaxial failure criterion for intact rock', International Journal of Rock Mechanics and Mining Sciences, 83, pp. 49 - 56, http://dx.doi.org/10.1016/j.ijrmms.2015.12.013
,2016, 'Laboratory based coupon testing for the understanding of SCC in rockbolts', Mining Technology, 125, pp. 174 - 183, http://dx.doi.org/10.1080/14749009.2015.1122296
,2016, 'Parametric study on the axial performance of a fully grouted cable bolt with a new pull-out test', International Journal of Mining Science and Technology, 26, pp. 53 - 58, http://dx.doi.org/10.1016/j.ijmst.2015.11.010
,2016, 'Examination of rockbolt stress corrosion cracking utilising full size rockbolts in a controlled mine environment', International Journal of Rock Mechanics and Mining Sciences, 81, pp. 86 - 97, http://dx.doi.org/10.1016/j.ijrmms.2015.11.007
,2016, 'Investigations into the corrosive environments contributing to premature failure of Australian coal mine rock bolts', International Journal of Mining Science and Technology, 26, pp. 59 - 64, http://dx.doi.org/10.1016/j.ijmst.2015.11.011
,2016, 'Load transfer behavior of fully grouted cable bolts reinforced in weak rocks under tensile loading conditions', Geotechnical Testing Journal, 39, pp. 252 - 263, http://dx.doi.org/10.1520/GTJ20150096
,2016, 'Load transfer behaviour of fully grouted cable bolts reinforced in weak rocks under tensile loading conditions', Geotechnical Testing Journal, http://dx.doi.org/10.1520/GTJ20150096
,2016, 'The effect of changes in tool angle on the cutting performance of a pointed pick', Mining Technology
,2016, 'The feasibility and effectiveness of Catch It, an innovative CBT smartphone app', BJPSYCH OPEN, 2, pp. 204 - 209, http://dx.doi.org/10.1192/bjpo.bp.115.002436
,2015, 'An analytical model of the load transfer behavior of fully grouted cable bolts', CONSTRUCTION AND BUILDING MATERIALS, 101, pp. 1006 - 1015, http://dx.doi.org/10.1016/j.conbuildmat.2015.10.099
,2015, 'Parametric study on the axial performance of a fully grouted cable bolt with a new pull-out test', International Journal of Mining Science and Technology, 26, pp. 53 - 58, http://dx.doi.org/10.1016/j.ijmst.2015.11.010
,2015, 'A modification to radial strain calculation in rock testing', Geotechnical Testing Journal, 38, pp. 813 - 822, http://dx.doi.org/10.1520/GTJ20140238
,2015, 'Spatial effects of lateral deformations of supporting structure of deep excavation', Journal of Engineering Science and Technology Review, 8, pp. 71 - 77, http://www.jestr.org/downloads/Volume8Issue3/fulltext83102015.pdf
,2015, 'Unified size-effect law for intact rock', International Journal of Geomechanics, 16, pp. 04015059, http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000543
,2015, 'Numerical Study of the Mechanical Behavior of Nonpersistent Jointed Rock Masses', International Journal of Geomechanics, pp. 04015035 - 04015035, http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000510
,2015, 'Defects visualisation using acoustic emission tomography technique', ACI Materials Journal, 112, pp. 755 - 766, http://dx.doi.org/10.14359/51687769
,2015, 'The effect of tool geometry on cutting performance', Journal of Research Projects Review, 4, pp. 43 - 48, http://www.mea.edu.au/asset/55712f559a67a/mea-journal-of-research-projects-review-2015.pdf
,2014, 'Fracture process and energy dissipation analysis of sandstone plates under the concentrated load', Technical Gazette, 21, pp. 1345 - 1351, http://hrcak.srce.hr/file/193996
,2014, 'Scale effect on the shear behaviour of rock joints based on a numerical study', Engineering Geology, 181, pp. 212 - 223, http://dx.doi.org/10.1016/j.enggeo.2014.07.018
,2014, 'Mechanics evolution characteristics analysis of pressure-arch in fully-mechanised mining field.', Journal of Engineering Science and Technology Review, 7, pp. 40 - 45, http://www.jestr.org/downloads/Volume7Issue4/fulltext77414.pdf
,2014, 'Parametric Study of Smooth Joint Parameters on the Shear Behaviour of Rock Joints', Rock Mechanics and Rock Engineering, 48, pp. 923 - 940, http://dx.doi.org/10.1007/s00603-014-0641-6
,2014, 'Fracture characteristics analysis of double-layer rock plates with both ends fixed condition', Journal of Engineering Science and Technology Review, 7, pp. 60 - 65, http://jestr.org/downloads/Volume7Issue2/fulltext97214.pdf
,2014, 'Energy dissipation characteristics of sandstone cutting under mechanical impact load', Computer Modelling and New Technologies, 18, pp. 13 - 20, http://www.tsi.lv/sites/default/files/editor/science/Research_journals/Computer/2014/V3/art02_cmnt1803-17_wang_su_hagan.pdf
,2014, 'Rock-arch instability characteristics of the sandstone under different loading conditions', Advances in Materials Science and Engineering, 2014, http://dx.doi.org/10.1155/5928
,2014, 'A study of on-bench explosives reloading at the Foxleigh Coal Mine', Journal of Research Projects Review, 3, pp. 15 - 19, http://www.mea.edu.au/asset/53cf17eebf0b3/mea-journal-of-research-projects-review-2014.pdf
,2014, 'Comparison of two excavation systems for the mining of lunar regolith', Journal of Research Projects Review, 3, pp. 39 - 44, http://www.mea.edu.au/asset/53cf17eebf0b3/mea-journal-of-research-projects-review-2014.pdf
,2014, 'Journal of Research Projects Review', Journal of Research Projects Review, 3
,2013, 'ISRM Suggested Method for Determining the Abrasivity of Rock by the CERCHAR Abrasivity Test', Rock Mechanics and Rock Engineering, 47, pp. 261 - 266, http://dx.doi.org/10.1007/s00603-013-0518-0
,2013, 'Application of acoustic emission tomography technique in concrete', ICCAHE 2013 - Proceedings Second International Conference on Civil, Architecture and Hydraulic Engineering
,2013, 'Estimation of Regional Stress State and Young's Modulus by Back Analysis of Mining-Induced Deformation', International Journal of Rock Mechanics and Mining Sciences, 63, pp. 1 - 11, http://dx.doi.org/10.1016/j.ijrmms.2013.05.007
,2013, 'Experimental research on the instability characteristics of double-layer rock plates based on MTS-AE system', Applied Mathematics & Information Sciences, 7, pp. 339 - 345, http://naturalspublishing.com/files/published/q22ocg6c7ln269.pdf
,2013, 'The effect of joint properties on a discontinuous rock mass', Mining Education Australia Research Projects Review 2012, 2, pp. 75 - 81, http://mea.edu.au/Content/wp-content/uploads/2013/03/MEA_RPR_2013.pdf
,