ORCID as entered in ROS
https://orcid.org/0000-0003-4011-2771
Select Publications
Journal articles
, 2013, 'The effects of water content, temperature and loading rate on strength and failure process of frozen rocks.', International Journal of Rock Mechanics and Mining Sciences, 62, pp. 1 - 13, http://dx.doi.org/10.1016/j.ijrmms.2013.03.006
, 2012, 'Loading device design for rock plate deformation and failure process and experimental verification', Journal of Yanshan University, http://dx.doi.org/10.3969/jissn1007-791X2012.06.011
, 2012, 'Improvements in gate road development rates using a monorail system.', Mining Education Australia Research Projects Review, 2011, pp. 51 - 54
, 2012, 'A project management approach to the undergraduate mining engineering thesis', Cuprum, 64, pp. 27 - 35
, 2012, 'Experimental research on fracture hinged arching process and instability characteristics for rock plates', Chinese Journal of Rock Mechanics and Engineering, 31, pp. 1674 - 1679
, 2012, 'Fractal characteristics of sandstone cutting fracture under mechanical shock loading conditions', Applied Mechanics and Materials, 226-228, pp. 1789 - 1794
, 2012, 'Prediction and Modelling of Blast Vibration and its Effects at Glendell Colliery', Mining Education Australia Research Projects Review 2012, 1, pp. 51 - 56
, 2011, 'Conference Report for the Second Australasian Ground Control Conference 2010', The AusIMM Bulletin Journal of The Australian Institute of Mining and Metallurgy, FEBRUARY 2011, pp. 80 - 81
, 2009, 'A collaborative approach to Mining education in Australia', The International Journal of Learning, 16, pp. 13 - 29, http://ijl.cgpublisher.com/product/pub.30/prod.2095
, 2009, 'Enhanced student collaboration in mining engineering through peer review of major projects', The International Journal of Learning, 16, pp. 501 - 519, http://ijb.cgpublisher.com/product/pub.30/prod.2494
, 1994, 'INEFFICACY OF LOW-DOSE CONTINUOUS ORAL ETOPOSIDE IN NONSMALL CELL LUNG-CANCER', AMERICAN JOURNAL OF CLINICAL ONCOLOGY-CANCER CLINICAL TRIALS, 17, pp. 163 - 165, http://dx.doi.org/10.1097/00000421-199404000-00015
, 1992, 'CRITERIA FOR GLOVES', AMERICAN JOURNAL OF NURSING, 92, pp. 20 - 20, http://dx.doi.org/10.2307/3426622
Conference Papers
, 2020, 'Parametric studies of cable bolts using a modified short encapsulation pull-out test', in Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019, pp. 2006 - 2011
, 2019, 'Statistical assessment of performance of cable bolts under axial loading', in 5th ISRM Young Scholars Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future Ysrm 2019, pp. 69 - 74
, 2018, 'A comparison of the performance of fully versus partially encapsulated cable bolts based on laboratory-sclae testing', in Ausrock2018: Fourth Australasian Ground Control in Mining Conference Proceedings, AusIMM, Melbourne, Sydney, Australia, pp. 291 - 302, presented at
, 2018, 'A systematic approach to data collection for improving the effectiveness in tunnel construction when using roadheaders', Singapore, presented at
, 2018, 'Energy revolution characteristics of pressure-arch during shallow horizontal coal mining', in Rock Mechanics in Infrastructure and Resource Development, Singapore, presented at
, 2018, 'Experimental protocol for stress corrosion cracking for full-size cable bolts', in Li CC; Li X; Zhang ZX (eds.), Rock Dynamics – Experiments, Theories and Applications - Proceedings of the 3rd International Conference on Rock Dynamics and Applications, ROCDYN-3 2018, Taylor & Francis, Trondheim, Norway, pp. 645 - 650, presented at
, 2018, 'Modelling the load-displacement behavior of fully grouted cable
bolts under constant normal stiffness', in Dershowitz B; Felice C (ed.), Proceedings 52nd US Rock Mechanics/Geomechancis Symposium, Seattle, USA, presented at
, 2018, 'Comparison of the performance of resin and cementitious grouting media for cable bolts', in Aziz N; Kininmonth B (ed.), Proceedings of the 2018 Coal Operators Conference, University of Wollonong, University of Wollongong, pp. 363 - 372, presented at
, 2018, 'Evolution characteristics of pressure-arch in disturbed overburden during shallow horizontal coal mining', in Proceedings of the 37th International Conference on Ground Control in Mining Icgcm 2018, pp. 219 - 227
, 2018, 'Laboratory methods for investigation on stress corrosion cracking of rockbolts and cable bolts', in ISRM International Symposium 10th Asian Rock Mechanics Symposium Arms 2018, http://dx.doi.org/10.26190/unsworks/27742
, 2017, 'An improvement to unified size effect law for intact rock', in Proceedings 51st US Rock Mechanics/Geomechanics Symposium, San Francisco, USA, presented at
, 2017, 'Instability characteristics analysis of the stress arch in key roof blocks during shallow horizontal thick coal mining', in Proceedings 4th ISRM Young Scholars’ Symposium on Rock Mechanics and the 5th International Symposium on New Development in Rock Engineering, Jeju Island, Korea, presented at
, 2017, 'A comparison between resin and cementitious material in the grouting of cable bolts', in Aziz N; Kininmonth B (ed.), Proceedings 17th Coal Operators' Conference, University of Wollongong, University of Wollongong, pp. 193 - 203, presented at
, 2017, 'The effect of water saturation in sandstone and limestone samples on disc cutting performance', in Aziz N; Kininmonth B (ed.), Proceedings 17th Coal Operators' Conference, University of Wollonong, University of Wollonong, pp. 254 - 260, presented at
, 2017, 'Variation in anchorage performance of a high capacity modified bulb cable bolt under differing conditions in a weak confining medium', in Aziz N; Kininmonth B (ed.), Proceedings 17th Coal Operators' Conference, University of Wollonong, University of Wollongong, pp. 211 - 221, presented at
, 2016, 'Effect of cutter tool angle on rock cutting performance', in Harmonizing Rock Mechanics with Sustainable Economic Development, ARMS9, Bali, Indonesia, presented at
, 2016, 'Variation in the reactivity of chemical solutions on rock properties with changes in temperature', in Harmonizing Rock Mechanics with Sustainable Economic Development, ARMS9, Bali, Indonesia, presented at
, 2016, 'Parametric study of cable bolt performance under axial loading in medium strength synthetic rock', in Hus K (ed.), Proceedings Eighth International Symposium on Ground Support in Mining and Underground Construction, Lulea University of Technology, Lulea, Sweden, presented at
, 2016, 'An experimental study of shear deformation behavior of rockbolts under dynamic loading', in Ulusay R; Aydan O; Gercek H; Hindistan MA; Tuncay E (eds.), The Proceedings of Eurock 2016: Rock Mechanics & Rock Engineering - From the Past to the Future, CRC Press / Balkema, Cappadocia, Turkey, pp. 797 - 802, presented at
, 2016, 'Evaluation of stress corrosion cracking failure for steel anchoring elements', in Ulusay R; Aydan O; Gercek H; Hindistan MA; Tuncay E (eds.), Eurock 2016: Rock Mechanics and Rock Engineering - From the Past to the Future, CRC Press / Balkema, Cappadoccia, Turkey, pp. 695 - 700, presented at
, 2016, 'On Size-dependent Uniaxial Compressive Strength of Sedimentary Rocks in Reservoir Geomechanics', in Proceedings 50th US Rock Mechanics/Geomechanics Symposium, Houston, USA, presented at
, 2016, 'A review of highwall mining experience and practice', in Aziz N; Kininmonth B (ed.), Proceedings of the 2016 Coal Operators' Conference, University of Wollongong, University of Wollongong, pp. 522 - 530, presented at
, 2016, 'Sample size and sample strength effects on testing the performance of cable bolts', in Aziz N; Kininmonth B (ed.), Proceedings of the 2016 Coal Operators' Conference, University of Wollongong, University of Wollongong, pp. 40 - 52, presented at
, 2016, 'The effect of temperature on the application of chemical solutions to rock', in Aziz N; Kininmonth B (ed.), Proceedings of the 2016 Coal Operators' Conference, University of Wollongong, University of Wollongong, pp. 139 - 150, presented at
, 2016, 'An experimental study of shear deformation behavior of rockbolt under dynamic loading', in ISRM International Symposium Eurock 2016, pp. 797 - 802, http://dx.doi.org/10.1201/9781315388502-137
, 2016, 'Evaluation of stress corrosion cracking failure for steel anchoring elements', in ISRM International Symposium Eurock 2016, pp. 695 - 700, http://dx.doi.org/10.1201/9781315388502-120
, 2015, 'Axial performance of a modified fully grouted cable bolt tested with a new laboratory short encapsulation pull test', in Barczak T; Peng SS (ed.), Proceedings 34th International Conference on Ground Control in Mining, West Virginia University, Morgantown, WV, USA, Morgantown, WV, USA, pp. 105 - 111, presented at
, 2015, 'Investigation into the effect of length to diameter ratio on the point load
strength index of Gosford sandstone', in Proceedings 49th US Rock Mechanics / Geomechanics Symposium 2015, San Francisco, USA, pp. 478 - 488, presented at
, 2015, 'A comparison of the anchorage performance of cable bolts based on a newly developed testing methodology', in 13th ISRM International Congress of Rock Mechanics, Montreal, Canada, pp. 1 - 12, presented at
, 2015, 'A comparison of the anchorage performance of cable bolts based on a newly developed testing methodology', in Proceedings 13th International Congress of Rock Mechanics: Innovations in Applied Theoretical Rock Mechanics, ISRM, Montreal, Canada, pp. 313 - 323, presented at
, 2015, 'Bent beam coupon testing for the investigation of stress corrosion cracking in rockbolts', in Proceedings 13th International Congress of Rock Mechanics: Innovations in Applied and Theoretical Rock Mechanics, ISRM, Montreal, Canada, pp. 322 - 328, presented at
, 2015, 'Bent beam coupon testing for the investigation of stress corrosion cracking in rockbolts', in Hassani ; Hadjigeorgiou ; Archibald (eds.), Innovations in Applied and Theoretical Rock Mechanics, Montreal, pp. 1 - 8, presented at
, 2015, 'Changes in cutter performance with tool wear', in Aziz N (ed.), Proceedings of the 2015 Coal Operators' Conference, University of Wollongong, University of Wollongong, pp. 284 - 291, presented at
, 2015, 'Changes in drilling performance and dust suppression with the use of a Water Separator Sub', in Aziz N; Kininmonth B (ed.), Proceedings of the 2015 Coal Operators' Conference, University of Wollongong, University of Wollongong, pp. 331 - 337, presented at
, 2015, 'The influence of concrete sample testing dimensions on assessing cable bolt load carrying capacity', in Aziz N; Kininmonth B (ed.), Proceedings of the 2015 Coal Operators' Conference, University of Wollongong, University of Wollongong, pp. 138 - 146, presented at
, 2014, 'Tensile stress mobilization along a rockbolt under shear load', in Proceedings 3rd ISRM International Young Scholars' Symposium on Rock Mechanics, Taylor & Francis Group, China, pp. 275 - 279, presented at
, 2014, 'Mechanical properties of cementitious grout serving in fully grouted cable bolting systems', in Hagan P; Saydam S (ed.), AusRock 2014: Third Australasian Ground Control in Mining Conference, Australasian Institute of Mining and Metallurgy, Sydney, Australia, pp. 269 - 276, presented at
, 2014, 'Consideration of the Factors Impacting on the Design of the Laboratory Short Encapsulation Test for Cable Bolts', in Shimizu N; Kaneko K; Kaneko J (eds.), Proceedings 8th Asian Rock Mechanics Symposium, ISRM, Hokkaido, Japan, pp. 1379 - 1388, presented at
Filter by type
https://orcid.org/0000-0003-4011-2771