By Scientia Professor Liangchi Zhang

Journal articles

Pramanik A; Zhang LC; Arsecularatne JA, 2006, 'Prediction of cutting forces in machining of metal matrix composites', International Journal of Machine Tools and Manufacture, 46, pp. 1795 - 1803, http://dx.doi.org/10.1016/j.ijmachtools.2005.11.012

Vodenitcharova T; Zhang LC; Zarudi I; Yin Y; Domyo H; Ho T, 2006, 'The effect of thermal shocks on the stresses in a sapphire wafer', IEEE Transactions on Semiconductor Manufacturing, 19, pp. 449 - 453, http://dx.doi.org/10.1109/TSM.2006.883591

Zhang LC; Zarudi I; Xiao KQ, 2006, 'Novel behaviour of friction and wear of epoxy composites reinforced by carbon nanotubes', Wear, 261, pp. 806 - 811, http://dx.doi.org/10.1016/j.wear.2006.01.033

Mylvaganam K; Zhang LC, 2006, 'Energy absorption capacity of carbon nanotubes under ballistic impact', Applied Physics Letters, 89, http://dx.doi.org/10.1063/1.2356325

Xiao KQ; Zhang LC, 2006, 'The effect of compressed cold air and vegetable oil on the subsurface residual stress of ground tool steel', Journal of Materials Processing Technology, 178, pp. 9 - 13, http://dx.doi.org/10.1016/j.jmatprotec.2005.05.013

Guo YP; Hu MJ; Zhou HF; Zhang LC; Su JH; Wang HW; Shen YG, 2006, 'Low concentrations of NaHSO3 increase photosynthesis, biomass, and attenuate photoinhibition in Satsuma mandarin (Citrus unshiu Marc.) plants', Photosynthetica, 44, pp. 333 - 337, http://dx.doi.org/10.1007/s11099-006-0032-7

Vodenitcharova T; Zhang LC; Zarudi I; Yin Y; Domyo H; Ho T, 2006, 'Transient thermal analysis of sapphire wafers subjected to thermal shocks', IEEE Transactions on Semiconductor Manufacturing, 19, pp. 292 - 297, http://dx.doi.org/10.1109/TSM.2006.879419

Zarudi I; Zhang LC, 2006, 'Structural evolution of carbon nanotubes in composites under contact sliding stresses', Applied Physics Letters, 88, http://dx.doi.org/10.1063/1.2212063

Mylvaganam K; Vodenitcharova T; Zhang LC, 2006, 'The bending-kinking analysis of a single-walled carbon nanotube-a combined molecular dynamics and continuum mechanics technique', Journal of Materials Science, 41, pp. 3341 - 3347, http://dx.doi.org/10.1007/s10853-005-5389-7

Guo YP; Zhou HF; Zhang LC, 2006, 'Photosynthetic characteristics and protective mechanisms against photooxidation during high temperature stress in two citrus species', Scientia Horticulturae, 108, pp. 260 - 267, http://dx.doi.org/10.1016/j.scienta.2006.01.029

Vodenitcharova T; Zhang LC, 2006, 'Bending and local buckling of a nanocomposite beam reinforced by a single-walled carbon nanotube', International Journal of Solids and Structures, 43, pp. 3006 - 3024, http://dx.doi.org/10.1016/j.ijsolstr.2005.05.014

Chen Y; Zhang LC; Arsecularatne JA; Montross C, 2006, 'Polishing of polycrystalline diamond by the technique of dynamic friction, part 1: Prediction of the interface temperature rise', International Journal of Machine Tools and Manufacture, 46, pp. 580 - 587, http://dx.doi.org/10.1016/j.ijmachtools.2005.07.018

Arsecularatne JA; Zhang LC; Montross C, 2006, 'Wear and tool life of tungsten carbide, PCBN and PCD cutting tools', International Journal of Machine Tools and Manufacture, 46, pp. 482 - 491, http://dx.doi.org/10.1016/j.ijmachtools.2005.07.015

Guo L; Zi YW; Lin H; Wei EC; Chen J; Liu M; Zhang LC; Li JQ; Gu H, 2006, 'Expression and functional analysis of the rice plasma-membrane intrinsic protein gene family', Cell Research, 16, pp. 277 - 286, http://dx.doi.org/10.1038/sj.cr.7310035

Nguyen T; Zhang LC, 2006, 'The coolant penetration in grinding with a segmented wheel - Part 2: Quantitative analysis', International Journal of Machine Tools and Manufacture, 46, pp. 114 - 121, http://dx.doi.org/10.1016/j.ijmachtools.2005.05.020

Huang W; Zhang LC; Gao YZ; Jin HY, 2006, 'The improvement of thermal stability of nickel silicide by adding a thin Zr interlayer', Microelectronic Engineering, 83, pp. 345 - 350, http://dx.doi.org/10.1016/j.mee.2005.10.001

Mylvaganam K; Zhang LC, 2006, 'Deformation-promoted reactivity of single-walled carbon nanotubes', Nanotechnology, 17, pp. 410 - 414, http://dx.doi.org/10.1088/0957-4484/17/2/011

Mylvaganam K; Zhang LC, 2006, 'A cross-scale characterization of interface properties between carbon nanotubes and polymer matrix', Key Engineering Materials, 312, pp. 217 - 222, http://dx.doi.org/10.4028/0-87849-994-6.217

Gu Y; Zhang L, 2006, 'A simple method for analysing the deformation of nanoelectromechanical switches based on carbon nanotubes', International Journal of Nanomanufacturing, 1, pp. 210 - 222, http://dx.doi.org/10.1504/IJNM.2006.012192

Zhang LC; Mylvaganam K, 2006, 'Nano-tribological analysis by molecular dynamics simulation - A review', Journal of Computational and Theoretical Nanoscience, 3, pp. 167 - 188, http://dx.doi.org/10.1166/jctn.2006.2999

Arsecularatne JA; Zhang LC; Montross C; Mathew P, 2006, 'On machining of hardened AISI D2 steel with PCBN tools', Journal of Materials Processing Technology, 171, pp. 244 - 252

Zhang LC; Nguyen T; Zarudi I, 2005, 'A new grinding-hardening technology using an inert cryogen', Lem 2005 3rd International Conference on Leading Edge Manufacturing in 21st Century, pp. 647 - 652

Xiao KQ; Zhang LC, 2005, 'Effective separation and alignment of long entangled carbon nanotubes in epoxy', Journal of Materials Science, 40, pp. 6513 - 6516, http://dx.doi.org/10.1007/s10853-005-1601-z

Pramanik A; Zhang LC; Arsecularatne JA, 2005, 'Mechanism of force generation in cutting metal matrix composites', Lem 2005 3rd International Conference on Leading Edge Manufacturing in 21st Century, pp. 157 - 162

Huang W; Zhang LC; Gao YZ; Jin HY; Ning BJ; Zhang GQ, 2005, 'Effect of a thin W interlayer on the thermal stability and electrical characteristics of NiSi film', Journal of Vacuum Science and Technology B Microelectronics and Nanometer Structures, 23, pp. 2304 - 2308, http://dx.doi.org/10.1116/1.2101647

Nguyen T; Zhang LC, 2005, 'The coolant penetration in grinding with segmented wheels - Part 1: Mechanism and comparison with conventional wheels', International Journal of Machine Tools and Manufacture, 45, pp. 1412 - 1420, http://dx.doi.org/10.1016/j.ijmachtools.2005.01.035

Zarudi I; Zhang LC; Cheong WCD; Yu TX, 2005, 'The difference of phase distributions in silicon after indentation with Berkovich and spherical indenters', Acta Materialia, 53, pp. 4795 - 4800, http://dx.doi.org/10.1016/j.actamat.2005.06.030

Wang SH; Zhang LC; Lin F; Sa XY; Zuo JB; Shao QX; Chen GS; Zeng S, 2005, 'Controlled release of levonorgestrel from biodegradable poly(D,L-lactide-co-glycolide) microspheres: In vitro and in vivo studies', International Journal of Pharmaceutics, 301, pp. 217 - 225, http://dx.doi.org/10.1016/j.ijpharm.2005.05.038

Mylvaganam K; Zhang L, 2005, 'A molecular dynamics and quantum mechanics modeling of single crystal silicon nanowire structures', Journal of Computational and Theoretical Nanoscience, 2, pp. 385 - 388, http://dx.doi.org/10.1166/jctn.2005.208

Mylvaganam K; Zhang LC, 2005, 'Nanotube bending due to central loading', Journal of Computational and Theoretical Nanoscience, 2, pp. 251 - 255, http://dx.doi.org/10.1166/jctn.2005.108

Ali YM; Zhang LC, 2005, 'Relativistic heat conduction', International Journal of Heat and Mass Transfer, 48, pp. 2397 - 2406, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2005.02.003

Tang CY; Zhang LC, 2005, 'A molecular dynamics analysis of the mechanical effect of water on the deformation of silicon monocrystals subjected to nano-indentation', Nanotechnology, 16, pp. 15 - 20, http://dx.doi.org/10.1088/0957-4484/16/1/004

Zarudi I; Nguyen T; Zhang LC, 2005, 'Effect of temperature and stress on plastic deformation in monocrystalline silicon induced by scratching', Applied Physics Letters, 86, pp. 1 - 11922, http://dx.doi.org/10.1063/1.1847692

Nguyen T; Zhang LC, 2005, 'Modelling of the mist formation in a segmented grinding wheel system', International Journal of Machine Tools and Manufacture, 45, pp. 21 - 28, http://dx.doi.org/10.1016/j.ijmachtools.2004.06.019

Zhang LC, 2005, 'The stress-dependence of phase changes in silicon under indentation', Proceedings of the World Tribology Congress III 2005, pp. 369 - 370, http://dx.doi.org/10.1115/wtc2005-63908

Zhang LC; Nguyen T; Zarudi I, 2005, 'A New Grinding-Hardening Technology Using an Inert Cryogen(Grinding technology)', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2005.2, pp. 647 - 652, http://dx.doi.org/10.1299/jsmelem.2005.2.647

VODENITCHAROVA T; ZHANG LC; ZARUDI I; YIN YB; DOMYO H; HO T, 2005, 'CMC-07: Stress Analysis of Sapphire Wafers Subjected to Thermal Shocks(CMC-I: CERAMICS AND CERAMECS MATRIX COMPOSITES)', The Proceedings of the JSME Materials and Processing Conference (M&P), 2005, pp. 15 - 15, http://dx.doi.org/10.1299/jsmeintmp.2005.15_3

MYLVAGANAM K; ZHANG LC, 2005, 'CMC-13: The Shape Effects of Silicon Nanowires : A Molecular Dynamics and Density Functional Theory Study(CMC-II: CERAMICS AND CERAMIC MATRIX COMPOSITE)', The Proceedings of the JSME Materials and Processing Conference (M&P), 2005, pp. 38 - 38, http://dx.doi.org/10.1299/jsmeintmp.2005.38_3

ARSECULARATNE JA; ZHANG LC; MONTROSS C, 2005, 'CSW-01: On Wear and Tool Life of Tungsten Carbide, PCBN and PCD Cutting Tools(CSW-I: COATING, SURFACE MODIFICATION AND WEAR)', The Proceedings of the JSME Materials and Processing Conference (M&P), 2005, pp. 36 - 36, http://dx.doi.org/10.1299/jsmeintmp.2005.36_5

CHEN Y; ZHANG LC; ARSECULARATNE JA; MONTROSS C, 2005, 'CSW-09: Estimation of the Interface Temperature Rise for Polishing PCD Compacts(CSW-II: COATING, SURFACE MODIFICATION AND WEAR)', The Proceedings of the JSME Materials and Processing Conference (M&P), 2005, pp. 41 - 41, http://dx.doi.org/10.1299/jsmeintmp.2005.41_4

PRAMANIK A; ZHANG LC; ARSECULARATNE JA, 2005, 'Mechanism of Force Generation in Cutting Metal Matrix Composites(Advanced machining technology)', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2005.1, pp. 157 - 162, http://dx.doi.org/10.1299/jsmelem.2005.1.157

Ali YM; Zhang LC, 2005, 'Relativistic moving heat source', INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48, pp. 2741 - 2758, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2005.02.004

Zhang LC; Jin HY; Gao YZ; Zhang H; Huang W; Lu JZ, 2004, 'The characteristics of Ni (Pt) Si/Si schottky barrier diode with deep trench', International Conference on Solid State and Integrated Circuits Technology Proceedings Icsict, 1, pp. 460 - 463

Hu NS; Zhang LC, 2004, 'Some observations in grinding unidirectional carbon fibre-reinforced plastics', Journal of Materials Processing Technology, 152, pp. 333 - 338, http://dx.doi.org/10.1016/j.jmatprotec.2004.04.374

Mylvaganam K; Zhang LC, 2004, 'Nanotube functionalization and polymer grafting: An ab initio study', Journal of Physical Chemistry B, 108, pp. 15009 - 15012, http://dx.doi.org/10.1021/jp048061x

Zarudi I; Zou J; McBride W; Zhang LC, 2004, 'Amorphous structures induced in monocrystalline silicon by mechanical loading', Applied Physics Letters, 85, pp. 932 - 934, http://dx.doi.org/10.1063/1.1779344

Mylvaganam K; Zhang LC, 2004, 'Important issues in a molecular dynamics simulation for characterising the mechanical properties of carbon nanotubes', Carbon, 42, pp. 2025 - 2032, http://dx.doi.org/10.1016/j.carbon.2004.04.004

Xiao KQ; Zhang LC, 2004, 'The stress transfer efficiency of a single-walled carbon nanotube in epoxy matrix', JOURNAL OF MATERIALS SCIENCE, 39, pp. 4481 - 4486, http://dx.doi.org/10.1023/B:JMSC.0000034141.48785.d2

Zarudi I; Zhang LC; Swain MV, 2004, 'Cyclic microindentations on monocrystalline silicon in air and in water', Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 218, pp. 591 - 598, http://dx.doi.org/10.1243/095440604774202222

Mylvaganam K; Zhang LC, 2004, 'Chemical bonding in polyethylene-nanotube composites: A quantum mechanics prediction', Journal of Physical Chemistry B, 108, pp. 5217 - 5220, http://dx.doi.org/10.1021/jp037619i

Back to profile page