By Scientia Professor Liangchi Zhang

Journal articles

Zhang LC, 1999, 'On the separation criteria in the simulation of orthogonal metal cutting using the finite element method', JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 90, pp. 273 - 278

Ali YM; Zhang LC, 1999, 'Surface roughness prediction of ground components using a fuzzy logic approach', Journal of Materials Processing Technology, 89-90, pp. 561 - 568, http://dx.doi.org/10.1016/S0924-0136(99)00022-9

Mahdi M; Zhang LC, 1999, 'Applied mechanics in grinding. Part 7. residual stresses induced by the full coupling of mechanical deformation, thermal deformation and phase transformation', INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 39, pp. 1285 - 1298, http://dx.doi.org/10.1016/S0890-6955(98)00094-7

Zarudi I; Zhang LC, 1999, 'Initiation of dislocation systems in alumina under single-point scratching', JOURNAL OF MATERIALS RESEARCH, 14, pp. 1430 - 1436, http://dx.doi.org/10.1557/JMR.1999.0193

Zhang LC; Tanaka H, 1999, 'On the mechanics and physics in the nano-indentation of silicon monocrystals', JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 42, pp. 546 - 559, http://dx.doi.org/10.1299/jsmea.42.546

Zarudi I; Zhang LC, 1999, 'Structure changes in mono-crystalline silicon subjected to indentation - experimental findings', TRIBOLOGY INTERNATIONAL, 32, pp. 701 - 712, http://dx.doi.org/10.1016/S0301-679X(99)00103-6

Zarudi I; Zhang LC, 1998, 'Effect of ultraprecision grinding on the microstructural change in silicon monocrystals', Journal of Materials Processing Technology, 84, pp. 149 - 158, http://dx.doi.org/10.1016/S0924-0136(98)00090-9

Zarudi I; Zhang LC; Cockayne D, 1998, 'Subsurface structure of alumina associated with single-point scratching', Journal of Materials Science, 33, pp. 1639 - 1645, http://dx.doi.org/10.1023/A:1017532308005

Zhang ZF; Zhang LC; Mai YW, 1998, 'Subsurface damage of ceramic particulate reinforced Al-Li alloy composite induced by scratching at an elevated temperature', MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 242, pp. 304 - 307, http://dx.doi.org/10.1016/S0921-5093(97)00731-4

Kadkhodayan M; Zhang LC; Sowerby R, 1997, 'Analyses of wrinkling and buckling of elastic plates by DXDR method', COMPUTERS & STRUCTURES, 65, pp. 561 - 574, http://dx.doi.org/10.1016/S0045-7949(96)00368-9

Kadkhodayan M; Zhang LC, 1997, 'A simple algorithm for stamping circular plates by hemispherical punches', Journal of Materials Processing Technology, 68, pp. 33 - 38, http://dx.doi.org/10.1016/S0924-0136(96)02524-1

Zhang LC; Lin ZQ, 1997, 'A new mechanics model of stamping a thin strip on an elastic foundation', INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 34, pp. 327 - 339, http://dx.doi.org/10.1016/S0020-7683(96)00011-X

Zhang ZF; Zhang LC; Mai YW, 1997, 'Prediction of critical load and wear rate of coatings by fuzzy theory', MATERIALS AND MANUFACTURING PROCESSES, 12, pp. 345 - 357, http://dx.doi.org/10.1080/10426919708935145

Mahdi M; Zhang LC, 1997, 'Applied mechanics in grinding .5. Thermal residual stresses', INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 37, pp. 619 - 633, http://dx.doi.org/10.1016/S0890-6955(96)00055-7

Zhang ZF; Zhang LC; Mai YW, 1997, 'Modeling steady wear of steel/Al2O3-Al particle reinforced composite system', WEAR, 211, pp. 147 - 150, http://dx.doi.org/10.1016/S0043-1648(97)00100-2

Zhang LC, 1997, 'Solving Mechanics Problems with Physical Understanding', International Journal of Mechanical Engineering Education, 25, pp. 215 - 221, http://dx.doi.org/10.1177/030641909702500306

Zhang LC; Tanaka H, 1997, 'Towards a deeper understanding of wear and friction on the atomic scale - a molecular dynamics analysis', WEAR, 211, pp. 44 - 53, http://dx.doi.org/10.1016/S0043-1648(97)00073-2

Zhang L; Mahdi M, 1996, 'The plastic behaviour of silicon subjected to micro-indentation', JOURNAL OF MATERIALS SCIENCE, 31, pp. 5671 - 5676, http://dx.doi.org/10.1007/BF01160813

Zarudi I; Zhang L, 1996, 'Subsurface damage in single-crystal silicon due to grinding and polishing', JOURNAL OF MATERIALS SCIENCE LETTERS, 15, pp. 586 - 587, http://dx.doi.org/10.1007/BF00579258

Zhang Z; Zhang L; Mai Y-W, 1996, 'Evaluation of critical wear transition loads of MMCs by rule based fuzzy modelling', TRIBOLOGY LETTERS, 2, pp. 89 - 97, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000207955700009&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Zarudi I; Zhang L; Mai YW, 1996, 'Subsurface damage in alumina induced by single-point scratching', JOURNAL OF MATERIALS SCIENCE, 31, pp. 905 - 914, http://dx.doi.org/10.1007/BF00352889

Zhang ZF; Zhang LC; Mai YW, 1996, 'The running-in wear of a steel/SiCp-Al composite system', WEAR, 194, pp. 38 - 43, http://dx.doi.org/10.1016/0043-1648(95)06671-3

Zhang ZF; Zhang LC; Mai YW, 1995, 'Particle effects on friction and wear of aluminium matrix composites', Journal of Materials Science, 30, pp. 5999 - 6004, http://dx.doi.org/10.1007/BF01151519

Kadkhodayan M; Zhang LC, 1995, 'A consistent DXDR method for elastic‐plastic problems', International Journal for Numerical Methods in Engineering, 38, pp. 2413 - 2431, http://dx.doi.org/10.1002/nme.1620381407

Zhang LC, 1995, 'A mechanics model for sheet-metal stamping using deformable dies', Journal of Materials Processing Tech, 53, pp. 798 - 810, http://dx.doi.org/10.1016/0924-0136(94)01765-S

Zhang LC, 1995, 'On the mechanism of cold rolling thin foil', International Journal of Machine Tools and Manufacture, 35, pp. 363 - 372, http://dx.doi.org/10.1016/0890-6955(94)E0028-H

Zhang ZF; Zhang LC; Mai YW, 1995, 'Wear of ceramic particle-reinforced metal-matrix composites - Part I Wear mechanisms', Journal of Materials Science, 30, pp. 1961 - 1966, http://dx.doi.org/10.1007/BF00353018

Zhang ZF; Zhang LC; Mai YW, 1995, 'Wear of ceramic particle-reinforced metal-matrix composites - Part II A model of adhesive wear', Journal of Materials Science, 30, pp. 1967 - 1971, http://dx.doi.org/10.1007/BF00353019

ZHANG LC; MAHDI M, 1995, 'APPLIED MECHANICS IN GRINDING .4. THE MECHANISM OF GRINDING INDUCED PHASE-TRANSFORMATION', INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 35, pp. 1397 - 1409, http://dx.doi.org/10.1016/0890-6955(95)93590-3

Yan C; Zhang L, 1995, 'Single-point scratching of 6061 Al alloy reinforced by different ceramic particles', Applied Composite Materials, 1, pp. 431 - 447, http://dx.doi.org/10.1007/bf00706503

Zhang LC; Kadkhodayan M; Mai YW, 1994, 'Development of the maDR method', Computers and Structures, 52, pp. 1 - 8, http://dx.doi.org/10.1016/0045-7949(94)90249-6

Wang CH; Zhang L; Mai YW, 1994, 'Deformation and fracture of Macadamia nuts - Part 1: Deformation analysis of nut-in-shell', International Journal of Fracture, 69, pp. 51 - 65, http://dx.doi.org/10.1007/BF00032188

Lu G; Zhang LC, 1994, 'Further remarks on the modelling of elastic modulus of grinding wheels', International Journal of Machine Tools and Manufacture, 34, pp. 841 - 846, http://dx.doi.org/10.1016/0890-6955(94)90063-9

ZHANG LC, 1994, 'GRINDABILITY OF SOME METALLIC AND CERAMIC MATERIALS IN CFG REGIMES', INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 34, pp. 1045 - 1057, http://dx.doi.org/10.1016/0890-6955(94)90012-4

ZHANG ZF; ZHANG LC; MAI YW, 1994, 'MODELING FRICTION AND WEAR OF SCRATCHING CERAMIC PARTICLE-REINFORCED METAL COMPOSITES', WEAR, 176, pp. 231 - 237

Zhang LC; Suto T; Noguchi H; Waida T, 1993, 'Applied mechanics in grinding part II: Modelling of elastic modulus of wheels and interface forces', International Journal of Machine Tools and Manufacture, 33, pp. 245 - 255, http://dx.doi.org/10.1016/0890-6955(93)90077-8

Zhang LC; Suto T; Noguchi H; Waida T, 1993, 'Applied mechanics in grinding-III. A new formula for contact length prediction and a comparison of available models', International Journal of Machine Tools and Manufacture, 33, pp. 587 - 597, http://dx.doi.org/10.1016/0890-6955(93)90094-B

Fleck NA; Johnson KL; Mear ME; Zhang LC, 1992, 'Cold Rolling of Foil', Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 206, pp. 119 - 131, http://dx.doi.org/10.1243/PIME_PROC_1992_206_064_02

Zhang LC; Yu TX, 1991, 'An experimental investigation into the stamping of elastic-plastic circular plates', Journal of Materials Processing Tech, 28, pp. 321 - 334, http://dx.doi.org/10.1016/0924-0136(91)90141-Z

Zhang LC, 1991, 'Numerical analysis of the shape effect on the tensile strength evaluation of axisymmetric specimens', International Journal for Numerical and Analytical Methods in Geomechanics, 15, pp. 241 - 250, http://dx.doi.org/10.1002/nag.1610150403

ZHANG LC; YU TX, 1990, 'THE ELASTIC-PLASTIC BENDING AND WRINKLING OF THIN CIRCULAR PLATES', CHINESE SCIENCE BULLETIN, 35, pp. 1602 - 1607, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1990EJ81800004&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Zhang LC; Yu TX; Wang R, 1989, 'Investigation of sheet metal forming by bending-Part I. Axisymmetric elastic-plastic bending of circular sheets pressed by cylindrical punches', International Journal of Mechanical Sciences, 31, pp. 285 - 300, http://dx.doi.org/10.1016/0020-7403(89)90004-0

Zhang LC; Yu TX; Wang R, 1989, 'Investigation of sheet metal forming by bending-Part II. Plastic wrinkling of circular sheets pressed by cylindrical punches', International Journal of Mechanical Sciences, 31, pp. 301 - 308, http://dx.doi.org/10.1016/0020-7403(89)90005-2

Zhang LC; Yu TX; Wang R, 1989, 'Investigation of sheet metal forming by bending-Part III: Applicability of deformation theory to stamping of circular sheets', International Journal of Mechanical Sciences, 31, pp. 327 - 333, http://dx.doi.org/10.1016/0020-7403(89)90057-X

Zhang LC; Yu TX; Wang R, 1989, 'Investigation of sheet metal forming by bending-Part IV: Bending and wrinkling of circular sheets pressed by a hemispherical punch', International Journal of Mechanical Sciences, 31, pp. 335 - 348, http://dx.doi.org/10.1016/0020-7403(89)90058-1

Zhang LG; Yu TX, 1989, 'Modified adaptive Dynamic Relaxation method and its application to elastic-plastic bending and wrinkling of circular plates', Computers and Structures, 33, pp. 609 - 614, http://dx.doi.org/10.1016/0045-7949(89)90035-7

Zhang LC; Yu TX, 1988, 'The plastic wrinkling of an annular plate under uniform tension on its inner edge', International Journal of Solids and Structures, 24, pp. 497 - 503, http://dx.doi.org/10.1016/0020-7683(88)90004-2

Xu Y; Zhang LC; Yu TX, 1987, 'The elastic-plastic pure bending and springback of L-shaped beams', International Journal of Mechanical Sciences, 29, pp. 425 - 433, http://dx.doi.org/10.1016/0020-7403(87)90003-8

Yu TX; Zhang LC, 1986, 'The elastic wrinkling of an annular plate under uniform tension on its inner edge', International Journal of Mechanical Sciences, 28, pp. 729 - 737, http://dx.doi.org/10.1016/0020-7403(86)90020-2

Zhang LC; Johnson KL; Cheong WCD, 'A molecular dynamics study of scale effects on the friction of single-asperity contacts', TRIBOLOGY LETTERS, 10, pp. 23 - 28, http://dx.doi.org/10.1023/A:1009038715458

Back to profile page