By Scientia Professor Veena Sahajwalla

Journal articles

Li K; Khanna R; Bouhadja M; Zhang J; Liu Z; Su B; Yang T; Sahajwalla V; Singh CV; Barati M, 2017, 'A molecular dynamic simulation on the factors influencing the fluidity of molten coke ash during alkalization with K2O and Na2O', Chemical Engineering Journal, 313, pp. 1184 - 1193, http://dx.doi.org/10.1016/j.cej.2016.11.011

Saini R; Khanna R; Dutta RK; Cayumil R; Ikram-Ul-Haq M; Agarwala V; Ellamparuthy G; Jayasankar K; Mukherjee PS; Sahajwalla V, 2017, 'A novel approach for reducing toxic emissions during high temperature processing of electronic waste', Waste Management, http://dx.doi.org/10.1016/j.wasman.2017.02.023

Ismail AN; Yunos NFM; Jamaludin SB; Idris MA; Ibrahim MH; Sahajwalla V, 2017, 'Influence of reduction temperatures on reduction of FeO-containing slag by agricultural waste', Materials Science Forum, 888 MSF, pp. 441 - 446, http://dx.doi.org/10.4028/www.scientific.net/MSF.888.441

Park H; Sohn I; Freislich M; Sahajwalla V, 2017, 'Investigation on the Reduction Behavior of Coal Composite Pellet at Temperatures between 1373 and 1573 K', Steel Research International, 88, http://dx.doi.org/10.1002/srin.201600169

Mayyas M; Pahlevani F; Maroufi S; Liu Z; Sahajwalla V, 2017, 'Waste conversion into high-value ceramics: Carbothermal nitridation synthesis of titanium nitride nanoparticles using automotive shredder waste', Journal of Environmental Management, 188, pp. 32 - 42, http://dx.doi.org/10.1016/j.jenvman.2016.11.079

Rajagopal RR; Rajarao R; Cholake ST; Sahajwalla V, 2017, 'Sustainable composite panels from non-metallic waste printed circuit boards and automotive plastics', Journal of Cleaner Production, 144, pp. 470 - 481, http://dx.doi.org/10.1016/j.jclepro.2016.12.139

You Y; Deng J; Tan X; Gorjizadeh N; Yoshimura M; Smith SC; Sahajwalla V; Joshi RK, 2017, 'On the mechanism of gas adsorption for pristine, defective and functionalized graphene.', Phys Chem Chem Phys, 19, pp. 6051 - 6056, http://dx.doi.org/10.1039/c6cp07654h

Gorjizadeh N; Pahlevani F; Sahajwalla V, 2017, 'Metallised plastic waste as a new resource – Study of electronic structure and chemical bond', Journal of Materials and Environmental Sciences, 8, pp. 1599 - 1606, http://www.jmaterenvironsci.com/Document/vol8/vol8_N5/170-JMES-2676-Gorjizadeh.pdf

Yin S; Rajarao R; Kong C; Wang Y; Gong B; Sahajwalla V, 2017, 'Sustainable fabrication of protective nanoscale TiN thin film on a metal substrate by using automotive waste plastics', ACS Sustainable Chemistry and Engineering, 5, pp. 1549 - 1556, http://dx.doi.org/10.1021/acssuschemeng.6b02253

lian B; Deng J; leslie G; Bustamante H; Sahajwalla ; Nishina Y; Joshi RK, 2017, 'Surfactant modified graphene oxide laminates for filtration', Carbon, 116, pp. 240 - 245, http://dx.doi.org/10.1016/j.carbon.2017.01.102

Shokri A; Pahlevani F; Levick K; Cole I; Sahajwalla V, 2017, 'Synthesis of copper-tin nanoparticles from old computer printed circuit boards', Journal of Cleaner Production, 142, pp. 2586 - 2592, http://dx.doi.org/10.1016/j.jclepro.2016.11.017

Cayumil R; Ikram-Ul-Haq M; Khanna R; Saini R; Mukherjee PS; Mishra BK; Sahajwalla V, 2017, 'High temperature investigations on optimising the recovery of copper from waste printed circuit boards', Waste Management, http://dx.doi.org/10.1016/j.wasman.2017.01.001

Khanna R; Ikram-Ul-Haq M; Rajarao R; Cayumil R; Rawal A; Sahajwalla V; Mukherjee PS, 2017, 'Novel multidimensional carbons from structural transformations of waste lignin: A low temperature pyrolysis investigation', Fuel Processing Technology, 166, pp. 312 - 321, http://dx.doi.org/10.1016/j.fuproc.2017.06.013

Farzana R; Rajarao R; Sahajwalla V, 2017, 'Reaction mechanism of ferrosilicon synthesis using waste plastic as a reductant', ISIJ International, 57, pp. 1780 - 1787, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-199

Kumar U; Maroufi S; Rajarao R; Mayyas M; Mansuri I; Joshi RK; Sahajwalla V, 2017, 'Cleaner Production of Iron by using Waste Macadamia Biomass as a Carbon Resource', Journal of Cleaner Production, 158, pp. 218 - 224, http://dx.doi.org/10.1016/j.jclepro.2017.04.115

Deng J; You Y; Bustamante H; Sahajwalla V; Joshi RK, 2017, 'Mechanism of Water Transport in Graphene Oxide Laminates', Chemical Science, 8, pp. 1701 - 1704, http://dx.doi.org/10.1039/C6SC03909J

Pahlevani F; Kumar R; Gorjizadeh N; Hossain R; Cholake ST; Privat K; Sahajwalla V; Goda R, 2016, 'Enhancing steel properties through in situ formation of ultrahard ceramic surface', Scientific Reports, 6, pp. 38740, http://dx.doi.org/10.1038/srep38740

Pahlevani F; Dippenaar R; Gorjizadeh N; Cholake ST; Hossain R; Kumar R; Sahajwalla V, 2016, 'Surface Modification of Steel Using Automotive Waste as Raw Materials', Procedia Manufacturing, 7, pp. 387 - 394, http://dx.doi.org/10.1016/j.promfg.2016.12.007

Nair A; Vineesh T; Thomas S; Sahajwalla V; Joshi RK; Alwarappan S; Kalarikkal N; Kala M, 2016, 'Boron doped graphene wrapped silver nanowires as an efficient electrocatalyst for molecular oxygen reduction', Scientific Reports, 6, pp. 37731, http://dx.doi.org/10.1038/srep37731

Tickner J; Rajarao R; Lovric B; Ganly B; Sahajwalla V, 2016, 'Measurement of Gold and Other Metals in Electronic and Automotive Waste Using Gamma Activation Analysis', Journal of Sustainable Metallurgy, 2, pp. 296 - 303, http://dx.doi.org/10.1007/s40831-016-0051-y

Cayumil R; Khanna R; Rajarao R; Mukherjee PS; Sahajwalla V, 2016, 'Concentration of precious metals during their recovery from electronic waste', Waste Management, 57, pp. 121 - 130, http://dx.doi.org/10.1016/j.wasman.2015.12.004

Rajagopal RR; Rajarao R; Sahajwalla V, 2016, 'High temperature transformations of waste printed circuit boards from computer monitor and CPU: Characterisation of residues and kinetic studies', Waste Management, 57, pp. 91 - 101, http://dx.doi.org/10.1016/j.wasman.2015.11.016

Hossain R; Pahlevani F; Quadir MZ; Sahajwalla V, 2016, 'Stability of retained austenite in high carbon steel under compressive stress: An investigation from macro to nano scale', Scientific Reports, 6, http://dx.doi.org/10.1038/srep34958

Rajarao R; Sahajwalla V, 2016, 'A cleaner, sustainable approach for synthesising high purity silicon carbide and silicon nitride nanopowders using macadamia shell waste', Journal of Cleaner Production, 133, pp. 1277 - 1282, http://dx.doi.org/10.1016/j.jclepro.2016.06.029

Ikram-ul-Haq M; Khanna R; Sahajwalla V, 2016, 'Interfacial reactions between alumina and carbon refractories and molten iron at 1,823 K', High Temperature Materials and Processes, 2015, pp. 895 - 904, http://dx.doi.org/10.1515/htmp-2015-0127

Sahajwalla V; Pahlevani F; Maroufi S; Rajarao R, 2016, 'Green Manufacturing: A Key to Innovation Economy', Journal of Sustainable Metallurgy, 2, pp. 273 - 275, http://dx.doi.org/10.1007/s40831-016-0087-z

Rajagopal RR; Aravinda LS; Rajarao R; Bhat BR; Sahajwalla V, 2016, 'Activated carbon derived from non-metallic printed circuit board waste for supercapacitor application', Electrochimica Acta, 211, pp. 488 - 498, http://dx.doi.org/10.1016/j.electacta.2016.06.077

Handoko W; Pahlevani F; Emmanuelawati I; Sahajwalla V, 2016, 'Transforming automotive waste into TiN and TiC ceramics', Materials Letters, 176, pp. 17 - 20, http://dx.doi.org/10.1016/j.matlet.2016.04.066

Mayyas M; Mayyas M; Pahlevani F; Liu Z; Rajarao R; Sahajwalla V, 2016, 'From automotive shredder residue to nano-ceramics and graphitic carbon—Thermal degradation kinetics', Journal of Analytical and Applied Pyrolysis, 120, pp. 60 - 74, http://dx.doi.org/10.1016/j.jaap.2016.04.010

Kumar A; Choudhary V; Khanna R; Tripathi SN; Ikram-Ul-Haq M; Sahajwalla V, 2016, 'Structural, thermal, morphological and dynamic mechanical characteristics of waste-reinforced polypropylene composites: A novel approach for recycling electronic waste', Journal of Applied Polymer Science, 133, http://dx.doi.org/10.1002/app.43389

Mayyas M; Pahlevani F; Handoko W; Sahajwalla V, 2016, 'Preliminary investigation on the thermal conversion of automotive shredder residue into value-added products: Graphitic carbon and nano-ceramics', Waste Management, 50, pp. 173 - 183, http://dx.doi.org/10.1016/j.wasman.2016.02.003

Suriani AB; Nurhafizah MD; Mohamed A; Masrom AK; Sahajwalla V; Joshi RK, 2016, 'Highly conductive electrodes of graphene oxide/natural rubber latex-based electrodes by using a hyper-branched surfactant', MATERIALS & DESIGN, http://dx.doi.org/10.1016/j.matdes.2016.03.067

Farzana R; Rajarao R; Sahajwalla V, 2016, 'Characteristics of waste automotive glasses as silica resource in ferrosilicon synthesis', Waste Management and Research, 34, pp. 113 - 121, http://dx.doi.org/10.1177/0734242X15617010

Joshi RK; Shukla S; Saxena S; Lee G-H; Sahajwalla V; Alwarappan S, 2016, 'Hydrogen generation via photoelectrochemical water splitting using chemically exfoliated MoS2 layers', AIP Advances, 6, pp. 15315 - 15315, http://dx.doi.org/10.1063/1.4941062

Molkeri A; Pahlevani F; Emmanuelawati I; Sahajwalla V, 2016, 'Thermal and mechanical stability of retained austenite in high carbon steel: An in-situ investigation', Materials Letters, 163, pp. 209 - 213, http://dx.doi.org/10.1016/j.matlet.2015.10.083

Khanna R; Ikram-Ul-Haq M; Seetharaman S; Sahajwalla V, 2016, 'Carbothermic reduction of alumina at 1 823 K: On the role of molten iron and reaction mechanisms', ISIJ International, 56, pp. 1300 - 1302, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2016-037

Kumar A; Khanna R; Ikram-Ul-Haq M; Spink J; Sahajwalla V, 2016, 'Corrosion Behavior of Al2O3-C Refractories with Casting Mould Meniscus Slags at 1 550 °c', Steel Research International, 87, pp. 46 - 56, http://dx.doi.org/10.1002/srin.201400590

You Y; Sahajwalla V; Yoshimura M; Joshi RK, 2016, 'Graphene and Graphene Oxide for Desalination', Nanoscale, 8, pp. 117 - 119, http://dx.doi.org/10.1039/C5NR06154G

Li K; Bouhadja M; Khanna R; Zhang J; Liu Z; Zhang Y; Yang T; Sahajwalla V; Yang Y; Barati M, 2016, 'Influence of SiO2 reduction on the local structural order and fluidity of molten coke ash in the high temperature zone of a blast furnace. A molecular dynamics simulation investigation', Fuel, 186, pp. 561 - 570, http://dx.doi.org/10.1016/j.fuel.2016.08.107

Hong L; Sahajwalla V, 2016, 'Reaction between Steel-Making Slag and Carbonaceous Materials while Mixing with High Density Polyethylene', High Temperature Materials and Processes, 35, pp. 65 - 71, http://dx.doi.org/10.1515/htmp-2014-0122

Deng J; You Y; Sahajwalla V; Joshi RK, 2016, 'Transforming waste into carbon-based nanomaterials', Carbon, 96, pp. 105 - 115, http://dx.doi.org/10.1016/j.carbon.2015.09.033

Li K; Khanna R; Zhang J; Barati M; Liu Z; Xu T; Yang T; Sahajwalla V, 2015, 'Comprehensive Investigation of Various Structural Features of Bituminous Coals Using Advanced Analytical Techniques', Energy and Fuels, 29, pp. 7178 - 7189, http://dx.doi.org/10.1021/acs.energyfuels.5b02064

Rajarao R; Farzana R; Khanna R; Sahajwalla V, 2015, 'Synthesis of SiC/Si3N4 nanocomposite by using automotive waste tyres as resource', Journal of Industrial and Engineering Chemistry, 29, pp. 35 - 38, http://dx.doi.org/10.1016/j.jiec.2015.04.006

Kumar A; Khanna R; Ikram-Ul-Haq M; Spink J; Sahajwalla V, 2015, 'Effect of Glaze on the Corrosion Behavior of ZrO2-Graphite Insert of the Submerged Entry Nozzle in the Continuous Casting of Steel', Steel Research International, 86, pp. 1004 - 1013, http://dx.doi.org/10.1002/srin.201400266

Bhat PB; Rajarao R; Sahajwalla V; Bhat BR, 2015, 'Immobilized magnetic nano catalyst for oxidation of alcohol', Journal of Molecular Catalysis A Chemical, 409, pp. 42 - 49, http://dx.doi.org/10.1016/j.molcata.2015.08.012

Li K; Zhang J; Barati M; Khanna R; Liu Z; Zhong J; Ning X; Ren S; Yang T; Sahajwalla V, 2015, 'Influence of alkaline (Na, K) vapors on carbon and mineral behavior in blast furnace cokes', Fuel, 145, pp. 202 - 213, http://dx.doi.org/10.1016/j.fuel.2014.12.086

Khanna R; Ikram-Ul-Haq M; Cayumil R; Rajarao R; Sahajwalla V, 2015, 'Novel carbon micro fibers and foams from waste printed circuit boards', Fuel Processing Technology, 134, pp. 473 - 479, http://dx.doi.org/10.1016/j.fuproc.2015.03.004

Farzana R; Sahajwalla V, 2015, 'Novel Recycling to Transform Automotive Waste Glass and Plastics into SiC-Bearing Resource by Silica Reduction', Journal of Sustainable Metallurgy, 1, pp. 65 - 74, http://dx.doi.org/10.1007/s40831-014-0004-2

Sahajwalla V; Cayumil R; Khanna R; Ikram-Ul-Haq M; Rajarao R; Mukherjee PS; Hill A, 2015, 'Recycling Polymer-Rich Waste Printed Circuit Boards at High Temperatures: Recovery of Value-Added Carbon Resources', Journal of Sustainable Metallurgy, 1, pp. 75 - 84, http://dx.doi.org/10.1007/s40831-014-0002-4

Kumar A; Khanna R; Ikram-ul-Haq M; Spink J; Sahajwalla V, 2015, 'Corrosion Behavior of Al2O3-C Refractories with Casting Mould Meniscus Slags at 1 550 °C', Steel Research International, http://dx.doi.org/10.1002/srin.201400590

Back to profile page