By Scientia Professor Chun Hui Wang

Journal articles

Pang F; Wang CH, 1999, 'Activation theory for creep of woven composites', Composites Part B Engineering, 30, pp. 613 - 620, http://dx.doi.org/10.1016/S1359-8368(99)00025-6

Liu R; Wang CH; Bathgate RG, 1999, 'Crack closure in spherical shells', International Journal of Fracture, 99, pp. 307 - 323, http://dx.doi.org/10.1023/A:1018682914979

Wang CH; Rose LRF, 1999, 'Crack-tip plastic blunting under gross section yielding and implications for modelling physically short cracks', Fatigue and Fracture of Engineering Materials and Structures, 22, pp. 761 - 773, http://dx.doi.org/10.1046/j.1460-2695.1999.t01-1-00209.x

Liu R; Wang CH; Bathgate RG, 1999, 'Fracture analysis of cracked Macadamia nutshells under contact load between two rigid plates', Journal of Agricultural and Engineering Research, 74, pp. 243 - 250, http://dx.doi.org/10.1006/jaer.1999.0455

Callinan RJ; Wang CH, 1999, 'On the fatigue enhancement of interference fitted stop drilled holes', International Journal of Fatigue, 21, pp. 865 - 872, http://dx.doi.org/10.1016/S0142-1123(99)00013-4

Wang ; Rose , 1999, 'Crack-tip plastic blunting under gross section yielding and implications for modelling physically short cracks', Fatigue <html_ent glyph="@amp;" ascii="&amp;"/> Fracture of Engineering Materials and Structures, 22, pp. 761 - 773, http://dx.doi.org/10.1046/j.1460-2695.1999.00209.x

Diewert WE, 1999, 'Introduction and Overview', Canadian Journal of Economics, 33, pp. 3 - 15

Wang CH; Rose LRF; Baker AA, 1998, 'Modelling of the fatigue growth behaviour of patched cracks', International Journal of Fracture, 88, pp. L65 - L70

Wang CH; Chao M, 1998, 'Near-tip deformation of a crack under gross section yielding', International Journal of Fracture, 90, pp. L49 - L54

Wang CH; Rose LRF; Callinan R, 1998, 'Analysis of out-of-plane bending in one-sided bonded repair', International Journal of Solids and Structures, 35, pp. 1653 - 1675, http://dx.doi.org/10.1016/S0020-7683(97)00129-7

Wang CH; Rose LRF, 1998, 'Bonded repair of cracks under mixed mode loading', International Journal of Solids and Structures, 35, pp. 2749 - 2773, http://dx.doi.org/10.1016/S0020-7683(97)00240-0

Wang CH, 1998, 'On the fracture of constrained layers', International Journal of Fracture, 93, pp. 227 - 246, http://dx.doi.org/10.1007/978-94-017-2854-6_12

Peng Z; Wang C; Li C; Gao Q; Wang Z; Zhang G; Zhang J; Li X; Peng J, 1998, 'Simultaneous determination of creatinine, pseudouridine and uric acid in serum and urine by high performance liquid chromatography', Se Pu Chinese Journal of Chromatography Zhongguo Hua Xue Hui, 16, pp. 146 - 148

Wang CH; Heller M; Rose LRF, 1998, 'Substrate stress concentrations in bonded lap joints', Journal of Strain Analysis for Engineering Design, 33, pp. 331 - 346, http://dx.doi.org/10.1243/0309324981513039

Wang CH; Rose LRF, 1998, 'Transient and steady-state deformation at notch root under cyclic loading', Mechanics of Materials, 30, pp. 229 - 241, http://dx.doi.org/10.1016/S0167-6636(98)00048-9

Wang CH, 1997, 'Analysis of cracks in constrained layers', International Journal of Fracture, 83, pp. 1 - 7

Pang F; Wang CH; Bathgate RG, 1997, 'Creep response of woven-fibre composites and the effect of stitching', Composites Science and Technology, 57, pp. 91 - 98, http://dx.doi.org/10.1016/S0266-3538(96)00112-1

Wang CH; Rose LRF, 1997, 'Determination of triaxial stresses in bonded joints', International Journal of Adhesion and Adhesives, 17, pp. 17 - 25, http://dx.doi.org/10.1016/S0143-7496(96)00028-0

Bathgate RG; Wang CH; Pang F, 1997, 'Effects of temperature on the creep behaviour of woven and stitched composites', Composite Structures, 38, pp. 435 - 445, http://dx.doi.org/10.1016/S0263-8223(97)00078-0

Wang CH, 1997, 'Fracture of interface cracks under combined loading', Engineering Fracture Mechanics, 56, pp. 77 - 86, http://dx.doi.org/10.1016/s0013-7944(96)00111-7

Brown MW; Suker DK; Wang CH, 1996, 'An analysis of mean stress in multiaxial random fatigue', Fatigue and Fracture of Engineering Materials and Structures, 19, pp. 323 - 333, http://dx.doi.org/10.1111/j.1460-2695.1996.tb00970.x

Wang CH, 1996, 'Effect of stress ratio on short fatigue crack growth', Journal of Engineering Materials and Technology Transactions of the ASME, 118, pp. 362 - 366, http://dx.doi.org/10.1115/1.2806819

Wang CH; Brown MW, 1996, 'Life prediction techniques for variable amplitude multiaxial fatigue—Part 1: Theories', Journal of Engineering Materials and Technology Transactions of the ASME, 118, pp. 367 - 370, http://dx.doi.org/10.1115/1.2806821

Wang CH; Brown MW, 1996, 'Life prediction techniques for variable amplitude multiaxial fatigue—Part 2: Comparison with experimental results', Journal of Engineering Materials and Technology Transactions of the ASME, 118, pp. 371 - 374, http://dx.doi.org/10.1115/1.2806822

Wang CH; Brown MW, 1996, 'On plastic deformation and fatigue under multiaxial loading', Nuclear Engineering and Design, 162, pp. 75 - 84, http://dx.doi.org/10.1016/0029-5493(95)01134-X

Wang CH, 1996, 'Viscoelasticity of engineering materials', NDT & E International, 29, pp. 241 - 241, http://dx.doi.org/10.1016/s0963-8695(96)00025-4

Wang C-H; Zhang L; Mai Y-W, 1995, 'Deformation and fracture of Macadamia nuts', International Journal of Fracture, 69, pp. 51 - 65, http://dx.doi.org/10.1007/bf00032188

Wang CH; Brown MW, 1994, 'Modelling of the deformation behaviour of flake graphite iron under multi-axial cyclic loading', Journal of Strain Analysis for Engineering Design, 29, pp. 277 - 288, http://dx.doi.org/10.1243/03093247V294277

Wang CH; Zhang L; Mai YW, 1994, 'Deformation and fracture of Macadamia nuts - Part 1: Deformation analysis of nut-in-shell', International Journal of Fracture, 69, pp. 51 - 65, http://dx.doi.org/10.1007/BF00032188

Wang CH; Mai YW, 1994, 'Deformation and fracture of Macadamia nuts - Part 2: Microstructure and fracture mechanics analysis of nutshell', International Journal of Fracture, 69, pp. 67 - 85, http://dx.doi.org/10.1007/BF00032189

WANG CH; BROWN MW, 1994, 'A STUDY OF THE DEFORMATION-BEHAVIOR UNDER MULTIAXIAL LOADING', EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 13, pp. 175 - 188, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1994NJ65400002&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Wang CH; Brown MW, 1993, 'A PATH‐INDEPENDENT PARAMETER FOR FATIGUE UNDER PROPORTIONAL AND NON‐PROPORTIONAL LOADING', Fatigue Fracture of Engineering Materials Structures, 16, pp. 1285 - 1297, http://dx.doi.org/10.1111/j.1460-2695.1993.tb00739.x

Wang CH; Miller KJ, 1993, 'SHORT FATIGUE CRACK GROWTH UNDER MEAN STRESS, UNIAXIAL LOADING', Fatigue Fracture of Engineering Materials Structures, 16, pp. 181 - 198, http://dx.doi.org/10.1111/j.1460-2695.1993.tb00752.x

WANG CH; MILLER KJ, 1993, 'THE EFFECT OF MEAN SHEAR-STRESS ON TORSIONAL FATIGUE BEHAVIOR (VOL 14, PG 293, 1991)', FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 16, pp. 1397 - 1398, http://dx.doi.org/10.1111/j.1460-2695.1993.tb00747.x

Wang CH; Miller KJ, 1992, 'THE EFFECTS OF MEAN AND ALTERNATING SHEAR STRESSES ON SHORT FATIGUE CRACK GROWTH RATES', Fatigue Fracture of Engineering Materials Structures, 15, pp. 1223 - 1236, http://dx.doi.org/10.1111/j.1460-2695.1992.tb01259.x

Wang CH; Miller KJ, 1991, 'THE EFFECT OF MEAN SHEAR STRESS ON TORSIONAL FATIGUE BEHAVIOUR', Fatigue Fracture of Engineering Materials Structures, 14, pp. 293 - 307, http://dx.doi.org/10.1111/j.1460-2695.1991.tb00659.x

Wang C; Pailthorpe MT, 1989, 'Expanding the use of the rapid ninhydrin test method', undefined

Wang C; Pailthorpe MT, 1989, 'Investigation of wool hydrolysis in conventional carbonizing', undefined

Wang C; Pailthorpe MT, 1987, 'Rapid and sensitive method for evaluating wool damage in carbonizing', undefined

Conference Papers

Sha Z; Yang W; Wang C; Islam MS; Yeoh GH; Officer DL; Canning W; Zhang J; Wang CH, 2024, 'Enhancing Thermal Stability of Carbon Fiber/Phenolic Matrix Composites Using ZrO2 Nanoparticles', in 11th Australasian Congress on Applied Mechanics Acam 2024, pp. 393 - 399

Wang J; Chang W; Islam MS; Huang F; Wu S; Francis Rose LR; Zhang J; Wang CH, 2024, 'TOUGHENING EPOXY POLYMER BY BLOCK COPOLYMER TO MITIGATE MATRIX CRACKING OF CARBON FIBRE COMPOSITES AT CRYOGENIC TEMPERATURES', in 11th Australasian Congress on Applied Mechanics Acam 2024, pp. 288 - 297

Limprapuwiwattana M; Ravindran A; Wang C; Mouritz A; Ladani R, 2023, 'Delamination Toughening of Composites Using Different Types Of Tufting Materials', in Iccm International Conferences on Composite Materials

Tihin G; Wang C-H; Islam M, 2021, 'Use of Nanoparticles to Produce Multiscale Carbon-Epoxy Composite Laminates for Cryogenic Liquid Hydrogen Fuel Tank', Virtual Congress, presented at 10th Australasian Congress on Applied Mechanics (ACAM10), Virtual Congress, 29 November 2021 - 01 December 2021

Mousavi S; Blanloeuil P; Vinoth T; Howard D; Wang CH, 2021, 'A 3d printed, constriction-resistive sensor for the detection of ultrasonic waves', in Materials Research Proceedings, pp. 272 - 277, http://dx.doi.org/10.21741/9781644901311-33

Blanloeuil P; Rose LRF; Veidt M; Wang CH, 2021, 'Debonding Growth Monitoring Through Ultrasonic Guided Waves Field Imaging', pp. 397 - 403, http://dx.doi.org/10.1007/978-3-030-48153-7_50

Lin Q; Peng S; Wu Y; Liu J; Hu W; Hassan M; Seneviratne A; Wang CH, 2020, 'E-jacket: posture detection with loose-fitting garment using a novel strain sensor', in Proceedings 2020 19th ACM IEEE International Conference on Information Processing in Sensor Networks IPSN 2020, Institute of Electrical and Electronics Engineers (IEEE), AUSTRALIA, Sydney, pp. 49 - 60, presented at 2020 19th ACM/IEEE International Conference on Information Processing in Sensor Networks (IPSN), AUSTRALIA, Sydney, 21 April 2020 - 24 April 2020, http://dx.doi.org/10.1109/IPSN48710.2020.00-47

Azadi S; Peng S; Asadnia M; Wang CH; Wu S, 2019, 'Highly stretchable strain sensors based on AgNWs/PV a nanocomposite hydrogels', in Proceedings of the International Conference on Sensing Technology Icst, http://dx.doi.org/10.1109/ICST46873.2019.9047721

Blanloeuil P; Francis Rose LR; Veidt M; Wang CH, 2019, 'Non-collinear shear wave mixing at a contact interface: Analytical modelling and parametric investigation', in Structural Health Monitoring 2019: Enabling Intelligent Life-Cycle Health Management for Industry Internet of Things (IIOT) - Proceedings of the 12th International Workshop on Structural Health Monitoring, Stanford, California, USA, pp. 1971 - 1977, presented at 12th International Workshop on Structural Health Monitoring · September 10-12, 2019, Stanford, California, USA, Stanford, California, USA, 10 September 2019 - 12 September 2019, http://dx.doi.org/10.12783/shm2019/32329

Islam M; Pearce G; Djukic L; Benninger L; Wang C, 2019, 'Development of multiscale toughening technique to address the micro-cracking problem of composites at cryogenic temperature', in TWENTY-SECOND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22), Melbourne, Australia, presented at TWENTY-SECOND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22), Melbourne, Australia, 11 August 2019 - 16 August 2019, http://dx.doi.org/10.26190/unsworks/27381

Sha Z; Han Z; Wu S; Wang CH, 2019, 'Enhanced interfacial property of carbon fibre composites based on vertical graphene', in Iccm International Conferences on Composite Materials

Back to profile page