By Professor Sophie Primig

Journal articles

Babinsky K; Weidow J; Knabl W; Lorich A; Leitner H; Primig S, 2014, 'Atom probe study of grain boundary segregation in technically pure molybdenum', Materials Characterization, 87, pp. 95 - 103, http://dx.doi.org/10.1016/j.matchar.2013.11.001

Nöhrer M; Mayer W; Primig S; Zamberger S; Kozeschnik E; Leitner H, 2014, 'Influence of deformation on the precipitation behavior of Nb(CN) in austenite and ferrite', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 45, pp. 4210 - 4219, http://dx.doi.org/10.1007/s11661-014-2373-3

Ressel G; Primig S; Leitner H, 2014, 'The effect of zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 45, pp. 1552 - 1558, http://dx.doi.org/10.1007/s11661-013-2052-9

Primig S; Leitner H; Kozeschnik E, 2014, 'Early Stages of Precipitation: Experiments and Modelling', BHM Berg- und Hüttenmännische Monatshefte, 159, pp. 5 - 11, http://dx.doi.org/10.1007/s00501-013-0226-9

Zacharias H; Arndt J; Primig S, 2014, 'Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7−6', BHM Berg- und Hüttenmännische Monatshefte, 159, pp. 296 - 297, http://dx.doi.org/10.1007/s00501-014-0272-y

Nöhrer M; Zamberger S; Primig S; Leitner H, 2013, 'Atom probe study of vanadium interphase precipitates and randomly distributed vanadium precipitates in ferrite', Micron, 54-55, pp. 57 - 64, http://dx.doi.org/10.1016/j.micron.2013.08.008

Ressel G; Primig S; Leitner H, 2013, 'The evolution of y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography', International Journal of Materials Research, 104, pp. 1088 - 1095, http://dx.doi.org/10.3139/146.110964

Primig S; Leitner H; Knabl W; Lorich A; Stickler R, 2012, 'Static recrystallization of molybdenum after deformation below 0.5*TM (K)', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 43, pp. 4806 - 4818, http://dx.doi.org/10.1007/s11661-012-1292-4

Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Textural evolution during dynamic recovery and static recrystallization of molybdenum', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 43, pp. 4794 - 4805, http://dx.doi.org/10.1007/s11661-012-1291-5

Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Influence of the heating rate on the recrystallization behavior of molybdenum', Materials Science and Engineering A, 535, pp. 316 - 324, http://dx.doi.org/10.1016/j.msea.2011.12.099

Primig S; Leitner H, 2011, 'Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis', Thermochimica Acta, 526, pp. 111 - 117, http://dx.doi.org/10.1016/j.tca.2011.09.001

Primig S; Leitner H; Lorich A; Knabl W; Clemens H; Stickler R, 2011, 'SEM and TEM investigations of recovery and recrystallization in technically pure molybdenum', Praktische Metallographie Practical Metallography, 48, pp. 344 - 355, http://dx.doi.org/10.3139/147.110136

Primig S; Leitner H; Clemens H; Lorich A; Knabl W; Stickler R, 2010, 'On the recrystallization behavior of technically pure molybdenum', International Journal of Refractory Metals and Hard Materials, 28, pp. 703 - 708, http://dx.doi.org/10.1016/j.ijrmhm.2010.03.006

Primig S; Leitner H, 2010, 'Transformation from continuous-to-isothermal aging applied on a maraging steel', Materials Science and Engineering A, 527, pp. 4399 - 4405, http://dx.doi.org/10.1016/j.msea.2010.03.084

Primig S; Leitner H; Clemens H; Stickler R; Lorich A; Knabl W; Köck W, 2010, 'Erholungs- und Rekristallisationsverhalten von technisch reinem Molybdän', BHM Berg- und Hüttenmännische Monatshefte, 155, pp. 20 - 25, http://dx.doi.org/10.1007/s00501-009-0530-6

Conference Papers

Breen AJ; Theska F; Lee H; Ringer SP; Primig S, 2025, 'Rapid 3D Characterisation of Grain Boundaries at the Atomic-Scale Using Atom Probe Tomography', in Rapid 3D Characterisation of Grain Boundaries at the Atomic-Scale Using Atom Probe Tomography, ScienceOpen, presented at 13th Asia Pacific Microscopy Congress 2025, http://dx.doi.org/10.14293/apmc13-2025-0342

Hofer C; Winkelhofer F; Krammerbauer J; Clemens H; Primig S, 2015, 'Atom probe tomography of carbides occurring in "carbide-free" bainitic steels', in Materials Today Proceedings, pp. S925 - S928, http://dx.doi.org/10.1016/j.matpr.2015.07.433

Turk C; Kellezi G; Leitner H; Staron P; Gan W; Clemens H; Primig S, 2015, 'B2 order transformation in a Fe - 25 at% Co - 9 at% Mo alloy', in Materials Research Society Symposium Proceedings, pp. 175 - 180, http://dx.doi.org/10.1557/opl.2015.117

Sackl S; Kellezi G; Leitner H; Clemens H; Primig S, 2015, 'Comparison of continuous and isothermal tempering of a high speed steel', in Ptm 2015 Proceedings of the International Conference on Solid Solid Phase Transformations in Inorganic Materials 2015, pp. 99 - 100

Primig S; Stechauner G; Kozeschnik E, 2015, 'Early stages of Cu precipitation in 15-5 PH maraging steel revisited - Experiments and modelling', in Ptm 2015 Proceedings of the International Conference on Solid Solid Phase Transformations in Inorganic Materials 2015, pp. 169 - 170

Mayer W; Sackl S; Shan YV; Primig S; Kozeschnik E, 2015, 'Evolution of precipitates and martensite substructure during continuous heat treatment', pp. S619 - S622, http://dx.doi.org/10.1016/j.matpr.2015.07.360

Sackl S; Kellezi G; Leitner H; Clemens H; Primig S, 2015, 'Martensitic transformation of a high-speed tool steel during continuous heat treatment', pp. S635 - S638, http://dx.doi.org/10.1016/j.matpr.2015.07.364

Primig S; Ragger KS; Buchmayr B, 2014, 'EBSD study of the microstructural evolution during hot compression testing of a superduplex steel', in Materials Science Forum, pp. 973 - 979, http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.973

Primig S; Ragger KS; Buchmayr B, 2014, 'EBSD study of the microstructural evolution during hot compression testing of a superduplex steel', in Advanced Materials Research, pp. 973 - 979, http://dx.doi.org/10.4028/www.scientific.net/MSF.783-786.973

Ressel G; Parz P; Fian A; Holec D; Primig S; Puff W; Leitner H; Clemens H, 2014, 'On the behavior of yttria/yttrium during mechanical alloying of a Fe - Y2O3 model alloy system', in Advanced Materials Research, pp. 598 - 603, http://dx.doi.org/10.4028/www.scientific.net/AMR.922.598

Conference Abstracts

Breen AJ; Day AC; Theska F; Lim B; Davids W; Primig S; Ringer SP, 2022, 'Expanding the Limits of Atom Probe Crystallographic Analysis', in Microscopy and Microanalysis, Oxford University Press (OUP), Vol. 28, pp. 756 - 758, http://dx.doi.org/10.1017/s1431927622003464

Preprints

Kühbach M; Rielli VV; Primig S; Saxena A; Mayweg D; Jenkins B; Antonov S; Reichmann A; Kardos S; Romaner L; Brockhauser S, 2022, On Strong-Scaling and Open-Source Tools for High-Throughput Quantification of Material Point Cloud Data: Composition Gradients, Microstructural Object Reconstruction, and Spatial Correlations, http://dx.doi.org/10.48550/arxiv.2205.13510

Theska F; Nomoto K; Godor F; Oberwinkler B; Stanojevic A; Ringer SP; Primig S, 2021, On the early stages of precipitation during direct ageing of Alloy 718, http://dx.doi.org/10.48550/arxiv.2103.02763

Hollerweger R; Riedl H; Paulitsch J; Arndt M; Rachbauer R; Polcik P; Primig S; Mayrhofer PH, 2014, Origin of High Temperature Oxidation Resistance of Ti-Al-Ta-N Coatings, http://dx.doi.org/10.48550/arxiv.1404.4345

Breen A; Theska F; Lim B; Primig S; Ringer SP, Advanced Quantification of the Site-Occupancy in Ordered Multi-Component Intermetallics Using Atom Probe Tomography, http://dx.doi.org/10.2139/ssrn.3979337

Back to profile page