ORCID as entered in ROS

Select Publications
2019, 'Enhancing the cavitation erosion resistance of D8m-Ta5Si3 nanocrystalline coatings through Al alloying', Ultrasonics Sonochemistry, 50, pp. 138 - 156, http://dx.doi.org/10.1016/j.ultsonch.2018.09.008
,2019, 'Oblique cross-section nanoindentation for determining the hardness change in ion-irradiated steel', International Journal of Plasticity, 112, pp. 242 - 256, http://dx.doi.org/10.1016/j.ijplas.2018.08.015
,2018, 'Understanding structural evolution of nanostructured Cu-Al2O3 composite powders during thermomechanical processing', Materialia, 4, pp. 268 - 275, http://dx.doi.org/10.1016/j.mtla.2018.09.026
,2018, 'Microstructure and mechanical properties of a multilayered CoCrNi/Ti coating with varying crystal structure', Surface and Coatings Technology, 350, pp. 596 - 602, http://dx.doi.org/10.1016/j.surfcoat.2018.07.066
,2018, 'Structure and properties of hydrophobic CeO2−x coatings synthesized by reactive magnetron sputtering for biomedical applications', Surface and Coatings Technology, 349, pp. 667 - 676, http://dx.doi.org/10.1016/j.surfcoat.2018.06.031
,2018, 'Comparative study of two nanoindentation approaches for assessing mechanical properties of ion-irradiated stainless steel 316', Metals, 8, http://dx.doi.org/10.3390/met8090719
,2018, 'Designer defect stabilization of the super tetragonal phase in >70-nm-thick BiFeO3 films on LaAlO3 substrates', Japanese Journal of Applied Physics, 57, pp. 0902b2, http://dx.doi.org/10.7567/JJAP.57.0902B2
,2018, 'Hierarchical nanostructure of CrCoNi film underlying its remarkable mechanical strength', Applied Physics Letters, 113, pp. 081905, http://dx.doi.org/10.1063/1.5042148
,2018, 'Effect of clay and iron sulphate on volatile and water-extractable organic compounds in bamboo biochars', Journal of Analytical and Applied Pyrolysis, 133, pp. 22 - 29, http://dx.doi.org/10.1016/j.jaap.2018.05.007
,2018, 'Antimicrobial and biocorrosion-resistant MoO 3 -SiO 2 nanocomposite coating prepared by double cathode glow discharge technique', Applied Surface Science, 447, pp. 500 - 511, http://dx.doi.org/10.1016/j.apsusc.2018.04.026
,2018, 'Dendrite-Free Sodium-Metal Anodes for High-Energy Sodium-Metal Batteries', Advanced Materials, 30, http://dx.doi.org/10.1002/adma.201801334
,2018, 'Study of the structure, properties, scratch resistance and deformation behaviour of graded Cr-CrN-Cr(1-x)AlxN coatings', Ceramics International, 44, pp. 11364 - 11373, http://dx.doi.org/10.1016/j.ceramint.2018.03.187
,2018, 'Mechanical and electrochemical properties of Al alloyed D8m-Ta5Si3 nanocrystalline coatings', Journal of Alloys and Compounds, 749, pp. 406 - 423, http://dx.doi.org/10.1016/j.jallcom.2018.03.156
,2018, 'INFLUENCE of FLUORIDE ION CONCENTRATIONS on the CORROSION BEHAVIOR of Ta2N NANOCRYSTALLINE COATING for DENTAL IMPLANT APPLICATIONS', Surface Review and Letters, 25, pp. 1850083, http://dx.doi.org/10.1142/S0218625X1850083X
,2018, 'INFLUENCE OF FLUORIDE ION CONCENTRATIONS ON THE CORROSION BEHAVIOR OF Ta2N NANOCRYSTALLINE COATING FOR DENTAL IMPLANT APPLICATIONS', Surface Review and Letters, 25, pp. 1 - 19
,2018, 'Grain growth and recrystallization behaviors of an ultrafine grained Al-0.6 wt%Mg-0.4 wt%Si-5vol.%SiC nanocomposite during heat treatment and extrusion', Journal of Alloys and Compounds, 745, pp. 519 - 524, http://dx.doi.org/10.1016/j.jallcom.2018.02.145
,2018, 'The mechanisms and consequences of inorganic reactions during the production of ferrous sulphate enriched bamboo biochars', Journal of Analytical and Applied Pyrolysis, 131, pp. 101 - 112, http://dx.doi.org/10.1016/j.jaap.2018.01.028
,2018, 'Wear behavior of graded Cr-CrN-Cr(1−x)Al(x)N coatings synthesized by closed-field unbalanced magnetron sputtering for advanced machining operations', Ceramics International, 44, pp. 7723 - 7733, http://dx.doi.org/10.1016/j.ceramint.2018.01.199
,2018, 'Effect of extrusion temperature on microstructure and properties of an ultrafine-grained Cu matrix nanocomposite fabricated by powder compact extrusion', Journal of Materials Science, 53, pp. 5389 - 5401, http://dx.doi.org/10.1007/s10853-017-1952-2
,2018, 'In vitro biocompatibility of a nanocrystalline β-Ta2O5 coating for orthopaedic implants', Ceramics International, 44, pp. 4660 - 4675, http://dx.doi.org/10.1016/j.ceramint.2017.12.040
,2018, 'Microstructural and associated chemical changes during the composting of a high temperature biochar: Mechanisms for nitrate, phosphate and other nutrient retention and release', Science of the Total Environment, 618, pp. 1210 - 1223, http://dx.doi.org/10.1016/j.scitotenv.2017.09.200
,2018, 'Crop-season and residual effects of sequentially applied mineral enhanced biochar and N fertiliser on crop yield, soil chemistry and microbial communities', Agriculture Ecosystems and Environment, 255, pp. 52 - 61, http://dx.doi.org/10.1016/j.agee.2017.12.020
,2018, 'Three-dimensional pie-like current collectors for dendrite-free lithium metal anodes', Energy Storage Materials, 11, pp. 127 - 133, http://dx.doi.org/10.1016/j.ensm.2017.10.012
,2018, 'Medium entropy alloy CoCrNi coatings: Enhancing hardness and damage-tolerance through a nanotwinned structuring', Surface and Coatings Technology, 335, pp. 257 - 264, http://dx.doi.org/10.1016/j.surfcoat.2017.12.021
,2018, 'High temperature stabilization of a nanostructured Cu-Y
2018, 'Powder processing and characterisation of a quinary Ni-Mn-Co-Sn-Cu Heusler alloy', Powder Technology, 324, pp. 69 - 75, http://dx.doi.org/10.1016/j.powtec.2017.10.017
,2018, 'A comparison between the characteristics of single- and mixed-feedstock biochars generated from wheat straw and basalt', Journal of Analytical and Applied Pyrolysis, 129, pp. 123 - 133, http://dx.doi.org/10.1016/j.jaap.2017.11.020
,2018, 'Mechanically robust TiAlSiN coatings prepared by pulsed-DC magnetron sputtering system: Scratch response and tribological performance', Thin Solid Films, 645, pp. 222 - 230, http://dx.doi.org/10.1016/j.tsf.2017.10.058
,2018, 'Mixed-phase bismuth ferrite thin films by chemical solution deposition', Journal of Materials Chemistry C, 6, pp. 2882 - 2888, http://dx.doi.org/10.1039/c7tc05841a
,2017, 'Pyrolysis of attapulgite clay blended with yak dung enhances pasture growth and soil health: Characterization and initial field trials', Science of the Total Environment, 607-608, pp. 184 - 194, http://dx.doi.org/10.1016/j.scitotenv.2017.06.186
,2017, 'Hierarchical Porous Carbon Spheres for High-Performance Na–O2 Batteries', Advanced Materials, 29, http://dx.doi.org/10.1002/adma.201606816
,2017, 'Growth of NiO Nanorods, SiC Nanowires and Monolayer Graphene Via a CVD Method', Green Chemistry, 19, pp. 5599 - 5607, http://dx.doi.org/10.1039/C7GC02523H
,2017, 'A communal catalogue reveals Earth's multiscale microbial diversity', Nature, 551, pp. 457 - 463, http://dx.doi.org/10.1038/nature24621
,2017, 'A communal catalogue reveals Earth’s multiscale microbial diversity', Nature, 551, pp. 457 - 463, http://dx.doi.org/10.1038/nature24621
,2017, 'Suppressing Al2O3 nanoparticle coarsening and Cu nanograin growth of milled nanostructured Cu-5vol.%Al2O3 composite powder particles by doping with Ti', Journal of Materials Science and Technology, 33, pp. 1323 - 1328, http://dx.doi.org/10.1016/j.jmst.2017.03.010
,2017, 'The influence of Ti additions on the mechanical and electrochemical behavior of β-Ta 5 Si 3 nanocrystalline coating', Applied Surface Science, 419, pp. 901 - 915, http://dx.doi.org/10.1016/j.apsusc.2017.05.130
,2017, 'Influence of substrate bias on microstructural evolution and mechanical properties of TiAlSiN thin films deposited by pulsed-DC magnetron sputtering', Thin Solid Films, 639, pp. 137 - 144, http://dx.doi.org/10.1016/j.tsf.2017.08.036
,2017, 'Characterization of organic compounds in biochars derived from municipal solid waste', Waste Management, 67, pp. 131 - 142, http://dx.doi.org/10.1016/j.wasman.2017.05.052
,2017, 'Effects of SiC Nanoparticle Content on the Microstructure and Tensile Mechanical Properties of Ultrafine Grained AA6063-SiCnp Nanocomposites Fabricated by Powder Metallurgy', Journal of Materials Science and Technology, 33, pp. 1023 - 1030, http://dx.doi.org/10.1016/j.jmst.2016.09.022
,2017, 'Nanoscale analyses of the surface structure and composition of biochars extracted from field trials or after co-composting using advanced analytical electron microscopy', Geoderma, 294, pp. 70 - 79, http://dx.doi.org/10.1016/j.geoderma.2017.01.037
,2017, 'Chemolithotrophic processes in the bacterial communities on the surface of mineral-enriched biochars', Isme Journal, 11, pp. 1087 - 1101, http://dx.doi.org/10.1038/ismej.2016.187
,2017, 'Nanoporosity improves the damage tolerance of nanostructured tantalum nitride coatings', Scripta Materialia, 133, pp. 86 - 91, http://dx.doi.org/10.1016/j.scriptamat.2017.02.008
,2017, 'The effect of sliding velocity on the dry sliding wear of nanophase Fe30Ni20Mn25Al25 against yttria-stabilized zirconia', Intermetallics, 83, pp. 17 - 28, http://dx.doi.org/10.1016/j.intermet.2016.12.008
,2017, 'An insight into the strain rate dependence of tensile ductility of an ultrafine grained Cu matrix nanocomposite', Materials Science and Engineering A, 688, pp. 164 - 168, http://dx.doi.org/10.1016/j.msea.2017.02.006
,2017, 'Structure and mechanical properties of graded Cr/CrN/CrTiN coatings synthesized by close field unbalanced magnetron sputtering', Surface and Coatings Technology, 309, pp. 779 - 789, http://dx.doi.org/10.1016/j.surfcoat.2016.10.087
,2017, 'Effect of heating rate and annealing temperature on secondary recrystallization of goss grains in a grain orientated silicon steel', ISIJ International, 57, pp. 1112 - 1120, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2016-718
,2017, 'Grain boundary deformation phenomena and secondary growth of goss grains in a Fe-3.5%Si steel', ISIJ International, 57, pp. 1874 - 1882, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-119
,2017, 'Magnetic and Magnetodielectric Properties of Epitaxial Iron Vanadate Thin Films', Advanced Electronic Materials, 3, http://dx.doi.org/10.1002/aelm.201600295
,2017, 'Mechanical and electrochemical properties of a sputter-deposited β-Ta5Si3nanocrystalline coating', Journal of Alloys and Compounds, 699, pp. 1068 - 1083, http://dx.doi.org/10.1016/j.jallcom.2016.12.413
,2017, 'Scratch adhesion and tribological behaviour of graded Cr/CrN/CrTiN coatings synthesized by closed-field unbalanced magnetron sputtering', Wear, 380-381, pp. 163 - 175, http://dx.doi.org/10.1016/j.wear.2017.03.020
,