ORCID as entered in ROS

Select Publications
2015, 'Predicting fire induced spalling in concrete structural elements', in Sanjayan J (ed.), Concrete 2015, Concrete Institute of Australia, Melbourne, Australia, pp. 1243 - 1251, presented at 27th Biennial National Conference of the Concrete Institute of Australia, Melbourne, Australia, 30 August 2015 - 02 September 2015
,2015, 'Insight from numerical simulation into the causes and risks of fire induced spalling in concrete walls, floors and tunnel linings', in The 2015 World Congress on Advances in Structural Engineering and Mechanics, Techno-Press, Incheon, Korea, presented at World Congress on Advances in Structural Engineering and Mechanics, Incheon, Korea, 25 August 2015 - 29 August 2015
,2015, 'Application of research-inspired assessment to enhance students learning in civil engineering', in Proceedings of the 43rd Sefi Annual Conference 2015 Diversity in Engineering Education an Opportunity to Face the New Trends of Engineering Sefi 2015
,2015, 'The performance of a cable-stayed bridge pylon under close-range blast loads', in Proceedings of the Second International Conference on Performance-based and Life-cycle Structural Engineering (PLSE 2015), School of Civil Engineering, The University of Queensland, pp. 1363 - 1372, presented at International Conference on Performance-based and Life-cycle Structural Engineering, http://dx.doi.org/10.14264/uql.2016.697
,2014, '1D frame element formulation for analysis of layered composite beams', Southern Cross University, Australia, Byron Bay, presented at 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Byron Bay, 09 December 2014 - 12 December 2014
,2014, 'Development of the compressive membrane action in partially restrained reinforced concrete sub-assemblages', in 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Southern Cross University, Australia, Byron Bay, pp. 357 - 362, presented at 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Byron Bay, 09 December 2014 - 12 December 2014
,2014, 'Flexural behaviour of high strength concrete composite incorporating long hooked-end steel fibres', in Proceedings of the 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Southern Cross University, Australia, Byron Bay, pp. 327 - 332, presented at 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Byron Bay, 09 December 2014 - 12 December 2014, http://scu.edu.au/acmsm23/
,2014, 'Sensitivity analysis for steel deck of a cable-stayed bridge subjected to blast loadings', in Proceedings of the 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Southern Cross University, Australia, pp. 1039 - 1044, presented at 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), 09 December 2014 - 12 December 2014, http://scu.edu.au/acmsm23/
,2014, 'Nonlinear dynamic analysis of framed structures by modal superposition', in 2014 IEEE GLOBAL COMMUNICATIONS CONFERENCE (GLOBECOM 2014), IEEE, Austin, TX, pp. 3601 - 3606, presented at IEEE Global Communications Conference (GLOBECOM), Austin, TX, 08 December 2014 - 12 December 2014, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000369900403092&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
,2014, 'Prediction of water vapour sorption isotherms and microstructure of hardened Portland cement pastes', in Li K; Yan P; Yang R (eds.), ONMOD2014 Proceedings of the RILEM International Symposium on Concrete Modelling, RILEM Publications S.A.R.L., Bejing, China, pp. 265 - 272, presented at 4th RILEM International Symposium on Concrete Modelling, Bejing, China, 12 October 2014 - 14 October 2014
,2013, 'Assessment of key response quantities for design of a cable-stayed bridge subjected to sudden loss of cable(s)', in From Materials to Structures Advancement Through Innovation Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials Acmsm 2012, pp. 387 - 392
,2013, 'Seismic performance improvement of stone masonry buildings in mud mortar', in From Materials to Structures Advancement Through Innovation Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials Acmsm 2012, pp. 479 - 484
,2013, 'Evaluation of the Mechanical Properties of Steel and Polypropylene Fibre-Reinforced Concrete Used in Beam Column Joints', in Composite Construction in Steel and Concrete VII Proceedings of the 2013 International Conference on Composite Construction in Steel and Concrete, pp. 401 - 407, http://dx.doi.org/10.1061/9780784479735.030
,2013, 'Review on long-term behaviour of timber-concrete composite floors', in From Materials to Structures: Advancement Through Innovation - Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, ACMSM 2012, pp. 1053 - 1058
,2012, 'The predictive model for strength of inclined screws as shear connection', in From Materials to Structures: Advancement through Innovation, CRC Press, London, UK, pp. 1059 - 1064, presented at 22nd ACMSM, UTS Sydney, 11 December 2012 - 14 December 2012
,2012, 'Comparative study on analytical modelling of short- and long-term behaviour in timber-concrete composite systems', in World Conference on Timber Engineering 2012, WCTE 2012, pp. 304 - 312
,2012, 'Finite element modeling of timber-concrete composite beams under short-term loadings', in ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers, pp. 859 - 867
,2011, 'Nonlinear dynamic analysis of framed structures by modal superposition', in Proceedings of the 8th International Conference on Structural Dynamics Eurodyn 2011, pp. 3601 - 3606
,2007, 'An improved flexibility formulation for nonlinear analysis of reinforced concrete frames', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
,2007, 'Consistent mass and exact displacement shape function for a tapered curved frame element', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
,2007, 'Nonlinear dynamic analysis of beam-column subjected to impact of blast loading', in Recent advances in security technology 2007, Australian Homeland Security Research, Curtin, ACT, presented at RNSA Security Technology Conference 2007, Melbourne, 28 September 2007
,2014, 'Hygro-thermal modelling of concrete exposed to high temperatures', http://dx.doi.org/10.4028/www.scientific.net/AMM.553.637
,