By Professor Gangadhara Prusty

Journal articles

Jinachandran S; Ning Y; Wu B; Li H; Xi J; Prusty BG; Rajan G, 2020, 'Cold Crack Monitoring and Localization in Welding Using Fiber Bragg Grating Sensors', IEEE Transactions on Instrumentation and Measurement, 69, pp. 9228 - 9236, http://dx.doi.org/10.1109/TIM.2020.3001367

Garg N; Prusty BG; Song C; Phillips AW, 2020, 'Cylindrical bending of thick laminated composite plates using scaled boundary finite element method', Engineering Analysis with Boundary Elements, 120, pp. 73 - 81, http://dx.doi.org/10.1016/j.enganabound.2020.08.009

Cho K; Sul JH; Stenzel MH; Farrar P; Prusty BG, 2020, 'Experimental cum computational investigation on interfacial and mechanical behavior of short glass fiber reinforced dental composites', Composites Part B Engineering, 200, pp. 108294, http://dx.doi.org/10.1016/j.compositesb.2020.108294

Tanulia V; Wang J; Pearce GM; Baker A; David M; Prusty BG, 2020, 'Corrigendum to “A procedure to assess disbond growth and determine fatigue life of bonded joints and patch repairs for primary airframe structures” [Int. J. Fatigue 137 (2020) 105664] (International Journal of Fatigue (2020) 137, (S014211232030195X), (10.1016/j.ijfatigue.2020.105664))', International Journal of Fatigue, 139, http://dx.doi.org/10.1016/j.ijfatigue.2020.105773

Banerjee A; Prusty BG; Zhu Q, 2020, 'Experimental and numerical investigation on the impact resistance of high-carbon low-alloy steel', Archives of Civil and Mechanical Engineering, 20, http://dx.doi.org/10.1007/s43452-020-00066-6

Tanulia V; Wang J; Pearce GM; Baker A; David M; Prusty BG, 2020, 'A procedure to assess disbond growth and determine fatigue life of bonded joints and patch repairs for primary airframe structures', International Journal of Fatigue, 137, http://dx.doi.org/10.1016/j.ijfatigue.2020.105664

Behl S; Raju ; Rajan G; Ellakwa A; Farrar P; Prusty BG, 2020, 'Physical and mechanical characterisation of flowable dental composites reinforced with short aspect ratio micro-sized S-Glass fibres', Materials Science and Engineering C, 111, pp. 110771, http://dx.doi.org/10.1016/j.msec.2020.110771

Ramakrishna VAS; Chamoli U; Rajan G; Mukhopadhyay SC; Prusty BG; Diwan AD, 2020, 'Smart orthopaedic implants: A targeted approach for continuous postoperative evaluation in the spine', Journal of Biomechanics, 104, http://dx.doi.org/10.1016/j.jbiomech.2020.109690

Jojibabu P; Zhang YX; Rider AN; Wang J; Wuhrer R; Prusty BG, 2020, 'High-performance epoxy-based adhesives modified with functionalized graphene nanoplatelets and triblock copolymers', International Journal of Adhesion and Adhesives, 98, http://dx.doi.org/10.1016/j.ijadhadh.2019.102521

Wanigasekara C; Oromiehie E; Swain A; Prusty BG; Nguang SK, 2020, 'Machine Learning Based Predictive Model for AFP-Based Unidirectional Composite Laminates', IEEE Transactions on Industrial Informatics, 16, pp. 2315 - 2324, http://dx.doi.org/10.1109/TII.2019.2932398

Oromiehie E; Garbe U; Gangadhara Prusty B, 2020, 'Porosity analysis of carbon fibre-reinforced polymer laminates manufactured using automated fibre placement', Journal of Composite Materials, 54, pp. 1217 - 1231, http://dx.doi.org/10.1177/0021998319875491

Garg N; Chakladar ND; Prusty BG; Song C; Phillips AW, 2020, 'Modelling of laminated composite plates with weakly bonded interfaces using scaled boundary finite element method', International Journal of Mechanical Sciences, 170, http://dx.doi.org/10.1016/j.ijmecsci.2019.105349

Armitage L; Buller A; Rajan G; Prusty G; Simmons A; Kark L, 2020, 'Clinical utility of pressure feedback to socket design and fabrication', Prosthetics and Orthotics International, 44, pp. 18 - 26, http://dx.doi.org/10.1177/0309364619868364

Prusty BG; Banerjee A, 2020, 'Structure-property correlation and constitutive description of structural steels during hot working and strain rate deformation', Materials, 13, http://dx.doi.org/10.3390/ma13030556

Banerjee A; Prusty BG; Bhattacharyya S; Zhu Q, 2020, 'An investigation on the deformation mechanisms of high carbon steel under the influence of thermal and rate-dependent loading', Materials Science and Engineering A, 772, http://dx.doi.org/10.1016/j.msea.2019.138766

Banerjee A; Wang H; Brown A; Ameri A; Zhu Q; Bhattacharyya S; Hazell PJ; Prusty BG, 2020, 'Experimental investigation on the dynamic flow behaviour and structure-property correlation of dual-phase high carbon steel at elevated temperatures', Materials Science and Engineering A, 771, http://dx.doi.org/10.1016/j.msea.2019.138655

Jojibabu P; Zhang YX; Prusty BG, 2020, 'A review of research advances in epoxy-based nanocomposites as adhesive materials', International Journal of Adhesion and Adhesives, 96, http://dx.doi.org/10.1016/j.ijadhadh.2019.102454

Rajan G; Raju R; Jinachandran S; Farrar P; Xi J; Prusty BG, 2019, 'Polymerisation Shrinkage Profiling of Dental Composites using Optical Fibre Sensing and their Correlation with Degree of Conversion and Curing Rate', Scientific Reports, 9, pp. 3162, http://dx.doi.org/10.1038/s41598-019-40162-z

Cho K; Wang G; Raju ; Fang J; Rajan G; Stenzel MH; Farrar P; Prusty BG, 2019, 'Selective Atomic-Level Etching on Short S-Glass Fibres to Control Interfacial Properties for Restorative Dental Composites', Scientific Reports, 9, pp. 3851, http://dx.doi.org/10.1038/s41598-019-40524-7

Jojibabu P; Zhang YX; Rider AN; Wang J; Gangadhara Prusty B, 2019, 'Synergetic effects of carbon nanotubes and triblock copolymer on the lap shear strength of epoxy adhesive joints', Composites Part B Engineering, 178, http://dx.doi.org/10.1016/j.compositesb.2019.107457

Ryzińska G; David M; Prusty G; Tarasiuk J; Wroński S, 2019, 'Effect of fibre architecture on the specific energy absorption in carbon epoxy composite tubes under progressive crushing', Composite Structures, 227, http://dx.doi.org/10.1016/j.compstruct.2019.111292

Oromiehie E; Prusty BG; Compston P; Rajan G, 2019, 'Automated fibre placement based composite structures: Review on the defects, impacts and inspections techniques', Composite Structures, 224, http://dx.doi.org/10.1016/j.compstruct.2019.110987

Cho K; Wang G; Raju R; Rajan G; Fang J; Stenzel MH; Farrar P; Gangadhara Prusty B; Prusty G, 2019, 'Influence of Surface Treatment on the Interfacial and Mechanical Properties of Short S-Glass Fiber-Reinforced Dental Composites', ACS Applied Materials and Interfaces, 11, pp. 32328 - 32338, http://dx.doi.org/10.1021/acsami.9b01857

Armitage L; Rajan G; Kark L; Simmons A; Prusty BG, 2019, 'Simultaneous measurement of normal and shear stress using fiber bragg grating sensors in prosthetic applications', IEEE Sensors Journal, 19, pp. 7383 - 7390, http://dx.doi.org/10.1109/JSEN.2019.2914702

Banerjee A; Gangadhara Prusty B; Zhu Q; Pahlevani F; Sahajwalla V; Prusty G, 2019, 'Strain-Rate-Dependent Deformation Behavior of High-Carbon Steel under Tensile–Compressive Loading', JOM, 71, pp. 2757 - 2769, http://dx.doi.org/10.1007/s11837-019-03594-6

Jinachandran S; Basu A; Li H; Xi J; Prusty BG; Rajan G, 2019, 'The Study of the Directional Sensitivity of Fiber Bragg Gratings for Acoustic Emission Measurements', IEEE Sensors Journal, 19, pp. 6771 - 6777, http://dx.doi.org/10.1109/JSEN.2019.2913415

Budarapu PR; Kumar S; Prusty BG; Paggi M, 2019, 'Stress transfer through the interphase in curved-fiber pullout tests of nanocomposites', Composites Part B Engineering, 165, pp. 417 - 434, http://dx.doi.org/10.1016/j.compositesb.2018.12.116

Shaheen W; Kanapathipillai K; Mathew P; Prusty G, 2019, 'Optimization of compound die punches and double cutting process parameters using finite element analysis', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, http://dx.doi.org/10.1177/0954405419855507

Banerjee A; Hossain R; Pahlevani F; Zhu Q; Sahajwalla V; Prusty BG, 2019, 'Strain-rate-dependent deformation behaviour of high-carbon steel in compression: mechanical and structural characterisation', Journal of Materials Science, 54, pp. 6594 - 6607, http://dx.doi.org/10.1007/s10853-018-03301-x

Banerjee A; Prusty BG, 2019, 'Corrigendum to “Fatigue and fracture behaviour of austenitic-martensitic high carbon steel under high cycle fatigue: An experimental investigation” [Mater. Sci. Eng.: A 749 (11) (March 2019) 79–88](S0921509319301704)(10.1016/j.msea.2019.02.010)', Materials Science and Engineering A, 754, pp. 812, http://dx.doi.org/10.1016/j.msea.2019.03.117

Patole SP; Reddy SK; Schiffer A; Askar K; Prusty BG; Kumar S, 2019, 'Piezoresistive and Mechanical Characteristics of Graphene Foam Nanocomposites', ACS Applied Nano Materials, 2, pp. 1402 - 1411, http://dx.doi.org/10.1021/acsanm.8b02306

Maung P; Prusty BG; White JM; David M; Phillips AW; St John NA, 2019, 'Structural performance of a shape-adaptive composite hydrofoil using automated fibre placement', Engineering Structures, 183, pp. 351 - 365, http://dx.doi.org/10.1016/j.engstruct.2019.01.014

Banerjee A; Gangadhara Prusty B, 2019, 'Fatigue and fracture behaviour of austenitic-martensitic high carbon steel under high cycle fatigue: An experimental investigation', Materials Science and Engineering A, 749, pp. 79 - 88, http://dx.doi.org/10.1016/j.msea.2019.02.010

Oromiehie E; Das Chakladar N; Rajan G; Prusty BG, 2019, 'Online monitoring and prediction of thermo-mechanics of AFP based thermoplastic composites', Sensors Switzerland, 19, http://dx.doi.org/10.3390/s19061310

Banerjee A; Prusty BG; Bhattacharyya S, 2019, 'Rate-dependent mechanical strength and flow behaviour of dual-phase high carbon steel at elevated temperatures: An experimental investigation', Materials Science and Engineering A, 744, pp. 224 - 234, http://dx.doi.org/10.1016/j.msea.2018.12.002

Jinachandran S; Li H; Xi J; Prusty BG; Semenova Y; Farrell G; Rajan G, 2018, 'Fabrication and characterization of a magnetized metal-encapsulated FBG sensor for structural health monitoring', IEEE Sensors Journal, 18, pp. 8739 - 8746, http://dx.doi.org/10.1109/JSEN.2018.2866803

Pearce GM; Mukkavilli A; Chowdhury N; Lim SH; Prusty G; Crosky A; Kelly D, 2018, 'Strain Invariant Failure Theory – Part 1: An extensible framework for predicting the mechanical performance of fibre reinforced polymer composites', Composite Structures, 209, pp. 1022 - 1034, http://dx.doi.org/10.1016/j.compstruct.2018.03.084

Hossain R; Pahlevani F; Witteveen E; Banerjee A; Joe B; Prusty G; Dippenaar R; Sahajwalla V, 2017, 'Hybrid structure of white layer in high carbon steel – Formation mechanism and its properties', Scientific Reports, 7, pp. 13288, http://dx.doi.org/10.1038/s41598-017-13749-7

Herath MT; Prusty BG; Phillips AW; St. John N, 2017, 'Structural strength and laminate optimization of self-twisting composite hydrofoils using a Genetic Algorithm', Composite Structures, 176, pp. 359 - 378, http://dx.doi.org/10.1016/j.compstruct.2017.05.012

Sul JH; Prusty BG; Crosky A, 2017, 'Effect of the addition of multi-walled carbon nanotubes on the thermomechanical properties of epoxy resin', Polymer Composites, 38, pp. 1873 - 1880, http://dx.doi.org/10.1002/pc.23757

Rajan G; Vinod JS; Moses T; Prusty BG; Xi J, 2017, 'Ballast Breakage Analysis Using FBG Acoustic Emission Measurement System', Geotechnical and Geological Engineering, 35, pp. 1239 - 1247, http://dx.doi.org/10.1007/s10706-017-0165-4

Oromiehie E; Gangadhara Prusty B; Compston P; Rajan G, 2017, 'In-situ simultaneous measurement of strain and temperature in automated fiber placement (AFP) using optical fiber Bragg grating (FBG) sensors', Advanced Manufacturing Polymer and Composites Science, 3, pp. 52 - 61, http://dx.doi.org/10.1080/20550340.2017.1317447

Atthapreyangkul A; Prusty BG, 2017, 'Experimental and numerical analysis on the geometrical parameters towards the maximum SEA of CFRP components', Composite Structures, 164, pp. 229 - 236, http://dx.doi.org/10.1016/j.compstruct.2016.12.078

Oromiehie E; Prusty G; Compston P; Rajan G, 2017, 'Characterization of process-induced defects in automated fiber placement manufacturing of composites using fiber Bragg grating sensors', Structural Health Monitoring, 17, pp. 108 - 117, http://dx.doi.org/10.1177/1475921716685935

Hellier AK; Prusty ; Pearce GM; Reid M; PARADOWSKA ; SIMONS P, 2016, 'Effect of Ultrasonic Peening on Residual Stresses at a T-Butt Weld Toe', Materials Research Proceedings, 2, pp. 19 - 24, http://dx.doi.org/10.21741/9781945291173-4

Subbaramaiah R; Prusty ; Pearce ; Lim SH; Thomson RS, 2016, 'Crashworthy Response of Fibre Metal Laminate Top Hat Structures', Composite Structures, 160, pp. 773 - 781, http://dx.doi.org/10.1016/j.compstruct.2016.10.112

Ni X-Y; Prusty BG; Hellier AK, 2016, 'Buckling and Post-Buckling of isotropic and composite stiffened panels: a review on optimisation (2000-2015)', Transactions of RINA, Part A3: International Journal of Maritime Engineering, 158, pp. A-251 - A-267, http://dx.doi.org/10.3940/rina.ijme.2016.a3.388

Rajan G; Shouha P; Ellakwa A; Bhowmik K; Xi J; Prusty G, 2016, 'Evaluation of the physical properties of dental resin composites using optical fiber sensing technology', Dental Materials, 32, pp. 1113 - 1123, http://dx.doi.org/10.1016/j.dental.2016.06.015

Oromiehie E; Rajan G; prusty G, 2016, 'Thermal sensitivity and relaxation of carbon fibre- foam sandwich composites with fibre optic sensors', Journal of sandwich structures and materials

Oromiehie E; Prusty G; Compston P; Rajan G, 2016, 'In-situ process monitoring for automated fibre placement using fibre Bragg grating sensors', Journal of structural health monitoring, 15, pp. 706 - 714, http://dx.doi.org/10.1177/1475921716658616

Back to profile page