Select Publications
Journal articles
, 2008, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', IEEE Transactions on Energy Conversion, 23, pp. 25 - 33, http://dx.doi.org/10.1109/TEC.2007.905061
, 2007, 'A direct-flux-vector-controlled induction generator with space-vector modulation for integrated starter alternator', IEEE Transactions on Industrial Electronics, 54, pp. 2512 - 2520
, 2007, 'An adaptive sliding stator flux observer for a direct-torque-controlled IPM synchronous motor drive', IEEE Transactions on Industrial Electronics, 54, pp. 2398 - 2406
, 2007, 'Analysis and comparison of methods for determining d- and q-axes inductances of IPM machines', Australian Journal of Electrical and Electronics Engineering, 3, pp. 189 - 199
, 2007, 'Direct torque and flux regulation of an IPM synchronous motor drive using variable structure control approach', IEEE Transactions on Power Electronics, 22, pp. 2487 - 2498
, 2007, 'Online stator and rotor resistance estimation scheme using artificial neural networks for vector controlled speed sensorless induction motor drive', IEEE Transactions on Industrial Electronics, 54, pp. 167 - 176, http://dx.doi.org/10.1109/TIE.2006.888778
, 2007, 'Parameter determination of an induction machine for integrated starter alternator', Australian Journal of Electrical and Electronics Engineering, 3, pp. 91 - 100
, 2006, 'A comparative analysis of two test methods of measuring d- and q-axes inductances of interior permanent-magnet machine', IEEE Transactions on Magnetics, 42, pp. 3712 - 3718
, 2006, 'Experimental study on using a high-temperature superconducting inductor for power loss reduction in an active power filter', Journal of Physics: Conference Series 264, 43, pp. 913 - 916
, 2005, 'Interior Permanent Magnet Generator: Generator of New Millennium', International Energy Journal, 6, pp. 51 - 57
, 2005, 'Network approach for physiological parameters measurement', IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 54, pp. 337 - 346, http://dx.doi.org/10.1109/TIM.2004.834595
, 2005, 'Stator and rotor resistance observers for induction motor drive using fuzzy logic and artificial neural networks', IEEE Transactions on Energy Conversion, 20, pp. 771 - 780, http://dx.doi.org/10.1109/TEC.2005.853761
, 2004, 'A Novel Direct Torque Controlled Interior Permanent Magnet Synchronous Machine Drive with Low Ripple in Flux and Torque and Fixed Switching Frequency', IEEE Transactions on Power Electronics, 19, pp. 346 - 354
, 2004, 'An implementation of a programmable cascaded low-pass filter for arotor flux synthesizer for an induction motor drive', IEEE Transactions on Power Electronics, 19, pp. 257 - 263
, 2004, 'An Improved Flux Linkage Estimator for a Direct Torque Controlled PM Syn Motor Drive', Australian Journal of Electrical and Electronics Engineering, 1, pp. 199 - 205
, 2004, 'Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive & their remedies', IEEE Transactions on Industrial Electronics, 51, pp. 799 - 809
, 2003, 'A Sensorless Initial Rotor Position Estimation Scheme for a Direct Torque Controlled Interior Permanent Magnet Synchronous Motor Drive', IEEE Transactions on Power Electronics, 18, pp. 1376 - 1383, http://dx.doi.org/10.1109/TPEL.2003.818869
, 2003, 'Direct torque control system and sensorless technique of permanent magnet synchronous motor', Chinese Journal of Aeronautics, 16, pp. 97 - 102, http://dx.doi.org/10.1016/S1000-9361(11)60211-2
, 2003, 'A Direct Torque-Controlled Interior PM Synchronous Motor Drive Without a Speed Sensor', IEEE Transactions on Energy Conversion, 18, pp. 17 - 22
, 2003, 'A Novel Direct Torque Control for Interior Permanent Magnet Syn. Machine Drive with Low Ripple in Torque and Flux - A speed sensorless approach.', IEEE Transactions on Industry Applications, pp. 1748 - 1756
, 2003, 'A Sensorless Initial Rotor Positon Estimation Scheme for a Direct Torque Controlled IPMSM Drive', IEEE Transactions on Power Electronics, 18, pp. 1376 - 1383
, 2003, 'Improved flux estimation in induction machines for control application', Journal of Electrical and Electronics Engineering, Australia, 22, pp. 243 - 248
, 2003, 'The Dynamic Characteristics of an Isolated Self-Excited Induction Generator Driven by a Wind Turbine', IEEE Transactions on Industry Applications, 39, pp. 936 - 944
, 2002, 'Improved trajectory control for an interior permanent magnet synchronous motor drive with extended operating limit', Journal of Electrical and Electronics Engineering, Australia, 22(1), pp. 49 - 57
, 2001, 'Initial Rotor Position Estimation of Interior Permanent Magnet Synchronous Motor without a Mechanical Sensor', Journal of Electrical and Electronics Engineering, Australia, pp. 33 - 40
, 2000, 'A regulated self-excited induction generator for use in a remote area power supply', International Journal of Renewable Energy Engineering, pp. 135 - 140
, 2000, 'Selection of voltage switching tables for DTC controlled interior permanent magnet motor', Journal of Electrical and Electronics Engineering, Australia, 20
, 1999, 'A solid state direct on line starter for medium voltage induction motors with minimized current and torque pulsations', IEEE Transactions on Energy Conversion, 14, pp. 402 - 412, http://dx.doi.org/10.1109/60.790889
, 1999, 'A Direct Torque Controller For Permanent Magnet Synchronous Motor Drives', IEEE Transactions on Energy Conversion, 14, pp. 637 - 642
, 1999, 'A novel method for rapid efficiency measurement of three phase induction motors', IEEE Transactions on Energy Conversion, 14, pp. 1236 - 1240
, 1999, 'A Singular Perturbation Approach to Sensorless Control of A Permanent Magnet Synchronous Motor Drive', IEEE Transactions on Energy Conversion, 14, pp. 1359 - 1365
, 1998, 'A direct torque controlled interior permanent magnet synchronous motor drive incorporating field weakening.', IEEE Transactions on Industry Applications, pp. 1246 - 1253
, 1998, 'Modelling and experimental studies of an instantaneous torque and field weakening control scheme for and interior permanent magnet synchronous motor drive', Mathematics and Computers in Simulation, pp. 289 - 300
, 1997, 'A microprocessor based fully digital AC servo drive', Microprocessors and Microsystems, 20, pp. 429 - 436, http://dx.doi.org/10.1016/S0141-9331(97)01118-6
, 1997, 'Analysis of Direct Torque Control in Permanent Magnet Synchronous Motor Drives', IEEE Transactions on Power Electronics, 12, pp. 528 - 536
, 1996, 'Comparing controllers for a flexible link', Journal of the Institution of Engineers, pp. 19 - 26
, 1996, 'Converting a switching solenoid to a proportional actuator', Transactions of IEE, Japan, 116-D, pp. 531 - 537
, 1993, 'BORESIGHT POINTING CALIBRATION OF COMMUNICATION SATELLITE THROUGH IN-ORBIT ANTENNA TESTS', IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 42, pp. 553 - 556, http://dx.doi.org/10.1109/19.278624
, 1992, 'Comparison of two control strategies in development of high-torque electronically commutated drive', IEE Proceedings B Electric Power Applications, 139, pp. 26 - 36, http://dx.doi.org/10.1049/ip-b.1992.0004
, 1991, 'A Discrete Time Variable Structure Controller for a Brushless DC Motor Drive', IEEE Transactions on Industrial Electronics, 38, pp. 102 - 107, http://dx.doi.org/10.1109/41.88902
, 1988, 'An Application Oriented Test Procedure For Designing Microstepping Step Motor Controllers', IEEE Transactions on Industrial Electronics, 35, pp. 542 - 546, http://dx.doi.org/10.1109/41.9177
, 1985, 'Approaches to Design of Ministepping Step Motor Controllers and Their Accuracy Considerations', IEEE Transactions on Industrial Electronics, IE-32, pp. 229 - 233, http://dx.doi.org/10.1109/TIE.1985.350163
, 1984, 'Loading Characteristic and Optimum Switching Conditions of Multistack Variable Reluctance Type Stepping Motors', IEEE Transactions on Industrial Electronics, IE-31, pp. 11 - 17, http://dx.doi.org/10.1109/TIE.1984.350013
, 1983, 'ROLE OF MULTIPHASE EXCITATIONS IN IMPROVING STEPPER MOTOR DAMPING.', Journal of Electrical and Electronics Engineering Australia, 3, pp. 310 - 315
Conference Papers
, 2024, 'Effect of Partial Demagnetization on Speed in Permanent Magnet Synchronous Machine', in 2024 IEEE Energy Conversion Congress and Exposition Ecce 2024 Proceedings, pp. 5269 - 5274, http://dx.doi.org/10.1109/ECCE55643.2024.10861651
, 2024, 'Speed Ripple Minimization of Open-Winding Permanent Magnet Synchronous Machine Under Demagnetization', in 2024 IEEE International Conference on Electrical Energy Conversion Systems and Control Ieecsc 2024, pp. 136 - 140, http://dx.doi.org/10.1109/IEECSC62814.2024.10913586
, 2023, 'Analysis of Zero Sequence Current in an Open Winding Permanent Magnet Synchronous Machine Under Rotor Magnet Fault Condition', in 2023 IEEE Energy Conversion Congress and Exposition Ecce 2023, pp. 5321 - 5328, http://dx.doi.org/10.1109/ECCE53617.2023.10362902
, 2023, 'Suppression Analysis of Zero-sequence Current Under Magnet Fault in an Open-winding Permanent Magnet Synchronous Machine', in 2023 IEEE International Conference on Energy Technologies for Future Grids Etfg 2023, http://dx.doi.org/10.1109/ETFG55873.2023.10408221
, 2022, 'A Comparison of Two-and Three-level Converter Systems in PMSG Grid Connection', in I and Cps Asia 2022 2022 IEEE IAS Industrial and Commercial Power System Asia, pp. 663 - 670, http://dx.doi.org/10.1109/ICPSAsia55496.2022.9949856
, 2022, 'Online Deadbeat Predictive Direct Torque and Active Flux Control for IPMSM Drive', in 2022 International Power Electronics Conference IPEC Himeji 2022 Ecce Asia, pp. 2479 - 2483, http://dx.doi.org/10.23919/IPEC-Himeji2022-ECCE53331.2022.9806977