By Emeritus Professor Jun Wang

Journal articles

Zheng L; Li Y; Sun Z; Luo Y; Xu Y; Wang J; Wang C; Wei X, 2025, 'Quantitative Detection of Micro Hole Wall Roughness in PCBs Based on Improved U-Net Model', Chinese Journal of Mechanical Engineering English Edition, 38, http://dx.doi.org/10.1186/s10033-025-01245-3

Wang J; Guo P; Li J; Wang J; Wang J; Zhang S, 2025, 'Point clouds restoration of milling surfaces with considering micro-nano scale geometric features', Measurement Journal of the International Measurement Confederation, 255, http://dx.doi.org/10.1016/j.measurement.2025.118055

Li B; Huang C; Chen Z; Liu H; Niu J; Wang J; Wang Z; Xu L; Huang S, 2025, 'Change of the machined hole wall surface roughness, microstructure and microhardness of low alloy steel caused by drill-guide-pads during BTA deep hole drilling', International Journal of Advanced Manufacturing Technology, 139, pp. 1595 - 1605, http://dx.doi.org/10.1007/s00170-025-15989-8

Wang J; Jing Y; Du X; Zheng L; Wang C; Chen P, 2025, 'Abrasive Waterjet Machining - State of the Art and Future Perspectives', Jixie Gongcheng Xuebao Journal of Mechanical Engineering, 61, pp. 46 - 77, http://dx.doi.org/10.3901/JME.2025.09.046

Zhang Y; Ding Y; Wang J; Hou R; Zheng M; Ma D; Huang J; Li W; Zhao Q; Sun Z; Li W; Wang J; Zhu S; Wang L; Wu X; Guan S, 2024, 'Study on degradation behavior of porous magnesium alloy scaffold loaded with rhBMP-2 and repair of bone defects', Journal of Materials Research and Technology, 30, pp. 6498 - 6507, http://dx.doi.org/10.1016/j.jmrt.2024.04.227

Zhang Y; Zhang Z; Wang J; Qin J; Huang S; Xue G; Liu Y, 2024, 'Research on Excitation Estimation for Ocean Wave Energy Generators Based on Extended Kalman Filtering', Energies, 17, http://dx.doi.org/10.3390/en17030704

Zhang R; Huang C; Wang J; Wang Q; Feng S; Zhao W; Tang A, 2024, 'Analysis of the microscopic characteristics of periodic structure arrays on silicon carbide fabricated by femtosecond laser', Ceramics International, 50, pp. 1193 - 1204, http://dx.doi.org/10.1016/j.ceramint.2023.10.212

Wang Y; Yan C; Mei D; Li Y; Sheng K; Wang J; Wang L; Zhu S; Guan S, 2024, 'Optimized structure design of asymmetrical Mg alloy cerebrovascular stent with high flexibility', Smart Materials in Manufacturing, 2, http://dx.doi.org/10.1016/j.smmf.2023.100040

Pan Y; Li K; Hu A; Zhao C; Zhang Y; Jiang X; Li B; Wang J; Long J, 2023, 'Manipulating Li2O2 deposition morphology by surface spin modulation of cobalt-based spinel oxide catalysts in lithium−oxygen batteries', Chemical Engineering Journal, 477, http://dx.doi.org/10.1016/j.cej.2023.147209

Wang J; Liu J; Li L, 2023, 'Topology Optimization for Digital Light Projector Additive Manufacturing Addressing the In-Situ Structural Strength Issue', Polymers, 15, http://dx.doi.org/10.3390/polym15173573

Wang H; Feng W; Liu D; Zhang G; Liu Y; Wang J; Zou L, 2023, 'Iron-based Soft Magnetic Materials Fabricated by Laser Additive Manufacturing', Engineered Science, 22, http://dx.doi.org/10.30919/es8d809

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2022, 'Prediction of tool wear width size and optimization of cutting parameters in milling process using novel ANFIS-PSO method', Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 236, pp. 111 - 122, http://dx.doi.org/10.1177/0954405420935262

Xu LH; Huang CZ; Niu JH; Wang J; Liu HL; Wang XD, 2021, 'Prediction of cutting power and surface quality, and optimization of cutting parameters using new inference system in high-speed milling process', Advances in Manufacturing, 9, pp. 388 - 402, http://dx.doi.org/10.1007/s40436-020-00339-6

Li M; Nguyen T; Wang J, 2021, 'Strip formation mechanisms and characteristics models in 3D printing of viscous polymer inks', Journal of Manufacturing Processes, 69, pp. 331 - 339, http://dx.doi.org/10.1016/j.jmapro.2021.08.009

Liu D; Huang C; Wang J; Zhu H, 2021, 'Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach', Ceramics International, 47, pp. 15165 - 15172, http://dx.doi.org/10.1016/j.ceramint.2021.02.076

Zhang P; Huang C; Zhu H; Wang J; Yao Y; Yao P, 2021, 'The research of tool wear criterion in micro cutting using the elastic recovery ratio of high-strength elastic alloy 3J33B', International Journal of Advanced Manufacturing Technology, 114, pp. 1767 - 1776, http://dx.doi.org/10.1007/s00170-021-06937-3

Xu L; Huang C; Niu J; Li C; Wang J; Liu H; Wang X, 2021, 'An improved case-based reasoning method and its application to predict machining performance', Soft Computing, 25, pp. 5683 - 5697, http://dx.doi.org/10.1007/s00500-020-05564-6

Gao T; Li C; Yang M; Zhang Y; Jia D; Ding W; Debnath S; Yu T; Said Z; Wang J, 2021, 'Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant', Journal of Materials Processing Technology, 290, http://dx.doi.org/10.1016/j.jmatprotec.2020.116976

Chen Y; Wang J; An Q, 2021, 'Mechanisms and predictive force models for machining with rake face textured cutting tools under orthogonal cutting conditions', International Journal of Mechanical Sciences, 195, http://dx.doi.org/10.1016/j.ijmecsci.2020.106246

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2021, 'An improved case based reasoning method and its application in estimation of surface quality toward intelligent machining', Journal of Intelligent Manufacturing, 32, pp. 313 - 327, http://dx.doi.org/10.1007/s10845-020-01573-2

Yun H; Zou B; Wang J; Huang C; Shi Z, 2021, 'Assessment of cyclic utilization of coated cemented carbide inserts for turning of Inconel 718', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-020-06520-2

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2021, 'Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining', Journal of Intelligent Manufacturing, 32, pp. 77 - 90, http://dx.doi.org/10.1007/s10845-020-01559-0

Zhang R; Huang C; Wang J; Feng S; Zhu H, 2021, 'Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation', Materials Science in Semiconductor Processing, 121, http://dx.doi.org/10.1016/j.mssp.2020.105299

Zhang P; Huang C; Zhu H; Wang J; Yao Y; Yao P, 2021, 'Experimental investigation on micro milling holes of high-strength elastic alloy', Beijing Hangkong Hangtian Daxue Xuebao Journal of Beijing University of Aeronautics and Astronautics, 47, pp. 132 - 139, http://dx.doi.org/10.13700/j.bh.1001-5965.2019.0650

Tangwarodomnukun V; Wang J; Huang CZ; Zhu HT, 2020, 'Corrigendum to “Heating and material removal process in hybrid laser-waterjet ablation of silicon substrates” [Int. J. Mach. Tool Manufact. 79 (2014) 1–16] (International Journal of Machine Tools and Manufacture (2014) 79 (1–16), (S0890695513001995), (10.1016/j.ijmachtools.2013.12.003))', International Journal of Machine Tools and Manufacture, 159, http://dx.doi.org/10.1016/j.ijmachtools.2020.103638

Niu J; Huang C; Li C; Zou B; Xu L; Wang J; Liu Z, 2020, 'A comprehensive method for selecting cutting tool materials', International Journal of Advanced Manufacturing Technology, 110, pp. 229 - 240, http://dx.doi.org/10.1007/s00170-020-05534-0

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2020, 'A novel intelligent reasoning system to estimate energy consumption and optimize cutting parameters toward sustainable machining', Journal of Cleaner Production, 261, http://dx.doi.org/10.1016/j.jclepro.2020.121160

Abbas CA; Huang C; Wang J; Wang Z; Liu H; Zhu H, 2020, 'Machinability investigations on high-speed drilling of aluminum reinforced with silicon carbide metal matrix composites', International Journal of Advanced Manufacturing Technology, 108, pp. 1601 - 1611, http://dx.doi.org/10.1007/s00170-020-05409-4

Zhao B; Liu H; Wang J; Huang C; Zhu H; Liu X, 2020, 'Influence of novel sintering process on the densification and microstructures of ceramic composite materials', Ceramics International, 46, pp. 6733 - 6737, http://dx.doi.org/10.1016/j.ceramint.2019.11.162

Liu D; Nguyen T; Wang J; Huang C, 2020, 'Mechanisms of enhancing the machining performance in micro abrasive waterjet drilling of hard and brittle materials by vibration assistance', International Journal of Machine Tools and Manufacture, 151, http://dx.doi.org/10.1016/j.ijmachtools.2020.103528

Zhang Z; Yao P; Li X; Wang J; Huang C; Zhu H; Zou B; Liu H, 2020, 'Grinding performance and tribological behavior in solid lubricant assisted grinding of glass-ceramics', Journal of Manufacturing Processes, 51, pp. 31 - 43, http://dx.doi.org/10.1016/j.jmapro.2020.01.020

Feng S; Zhang R; Huang C; Wang J; Jia Z; Wang J, 2020, 'An investigation of recast behavior in laser ablation of 4H-silicon carbide wafer', Materials Science in Semiconductor Processing, 105, http://dx.doi.org/10.1016/j.mssp.2019.104701

Zhang C; Zhu H; Jiang Z; Huang C; Wang J, 2020, 'Removal mechanism and surface quality of crystal semiconductor materials in scratching tests with Berkovich indenter', Materials Science in Semiconductor Processing, 105, http://dx.doi.org/10.1016/j.mssp.2019.104746

Yun H; Zou B; Wang J; Huang C; Xing H; Shi Z; Xue K, 2020, 'Design and fabrication of graded cBN tool materials through high temperature high pressure method', Journal of Alloys and Compounds, 832, pp. 154937 - 154937, http://dx.doi.org/10.1016/j.jallcom.2020.154937

Yang F; Liu D; Deng Y; Wang J; Mei S; Ge S; Li H; Zhang C; Zhang T, 2020, 'Frequent promoter methylation of HOXD10 in endometrial carcinoma and its pathological significance', ONCOLOGY LETTERS, 19, pp. 3602 - 3608, http://dx.doi.org/10.3892/ol.2020.11467

Thongkaew K; Wang J; Yeoh G, 2019, 'Impact characteristics and stagnation formation on a solid surface by a supersonic abrasive waterjet', International Journal of Extreme Manufacturing, http://dx.doi.org/10.1088/2631-7990/ab531c

Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P, 2019, 'On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel', International Journal of Advanced Manufacturing Technology, 104, pp. 585 - 598, http://dx.doi.org/10.1007/s00170-019-03911-y

Yun H; Zou B; Wang J; Huang C; Li S, 2019, 'Optimization of energy consumption in coating removal for recycling scrap coated cemented carbide tools using hybrid laser-waterjet', Journal of Cleaner Production, 229, pp. 104 - 114, http://dx.doi.org/10.1016/j.jclepro.2019.04.315

Yang M; Li C; Zhang Y; Jia D; Li R; Hou Y; Cao H; Wang J, 2019, 'Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions', Ceramics International, 45, pp. 14908 - 14920, http://dx.doi.org/10.1016/j.ceramint.2019.04.226

Niu J; Huang C; Su R; Zou B; Wang J; Liu Z; Li C, 2019, 'Study on surface integrity of compacted graphite iron milled by cemented carbide tools and ceramic tools', International Journal of Advanced Manufacturing Technology, 103, pp. 4123 - 4134, http://dx.doi.org/10.1007/s00170-019-03592-7

Zhang Z; Yao P; Wang J; Huang C; Cai R; Zhu H, 2019, 'Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material', International Journal of Mechanical Sciences, 157-158, pp. 243 - 253, http://dx.doi.org/10.1016/j.ijmecsci.2019.04.047

Zhao B; Liu H; Huang C; Wang J; Wang B; Hou Y, 2019, 'Cutting performance and crack self-healing mechanism of a novel ceramic cutting tool in dry and high-speed machining of Inconel 718', International Journal of Advanced Manufacturing Technology, 102, pp. 3431 - 3438, http://dx.doi.org/10.1007/s00170-019-03386-x

Yao Y; Zhu H; Huang C; Wang J; Zhang P; Yao P, 2019, 'Investigation on chip formation and surface integrity in micro end milling of maraging steel', International Journal of Advanced Manufacturing Technology, 102, pp. 1973 - 1984, http://dx.doi.org/10.1007/s00170-018-03219-3

Xu L; Huang C; Su R; Zhu H; Liu H; Liu Y; Li C; Wang J, 2019, 'Estimation of tool life and cutting burr in high speed milling of the compacted graphite iron by de based adaptive neuro-fuzzy inference system', Mechanical Sciences, 10, pp. 243 - 254, http://dx.doi.org/10.5194/ms-10-243-2019

Chen Y; Wang J; Chen M, 2019, 'Enhancing the machining performance by cutting tool surface modifications: a focused review', Machining Science and Technology, 23, pp. 477 - 509, http://dx.doi.org/10.1080/10910344.2019.1575412

Nguyen T; Wang J, 2019, 'A review on the erosion mechanisms in abrasive waterjet micromachining of brittle materials', International Journal of Extreme Manufacturing, 1, pp. 012006 - 012006, http://dx.doi.org/10.1088/2631-7990/ab1028

Feng S; Huang C; Wang J; Jia Z, 2019, 'Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining', Materials Science in Semiconductor Processing, 93, pp. 238 - 251, http://dx.doi.org/10.1016/j.mssp.2018.12.037

Wang Z; Huang C; Wang J; Wang P; Bi S; Abbas CA, 2019, 'Design and Simulation of Flow Field for Bone Tissue Engineering Scaffold Based on Triply Periodic Minimal Surface', Chinese Journal of Mechanical Engineering (English Edition), 32, http://dx.doi.org/10.1186/s10033-019-0329-7

Wang Z; Huang C; Wang J; Zou B, 2019, 'Development of a novel aqueous hydroxyapatite suspension for stereolithography applied to bone tissue engineering', Ceramics International, 45, pp. 3902 - 3909, http://dx.doi.org/10.1016/j.ceramint.2018.11.063

Thongkaew K; Wang J; Li W, 2019, 'An investigation of the hole machining processes on woven carbon-fibre reinforced polymers (CFRPs) using abrasive waterjets', Machining Science and Technology: an international journal, 23, pp. 19 - 38, http://dx.doi.org/10.1080/10910344.2018.1449217

Back to profile page