By Emeritus Professor Jun Wang

Books

, 2012, Advances in Materials Processing X, Huang CZ; Zhu HT; Wang J; Li X, (eds.), Trans Tech Publicaitons, United Kingdom, http://www.ttp.net/978-3-03785-399-3.html

Wang J, 2003, Abrasive Waterjet Machining of Engineering Materials, Trans Tech Publications, Uetikon-Zuerich, Switzerland

Book Chapters

Yamaguchi H; Williams R; Wang J; Shih A; Altena H; Lei S; Kuriyagawa T; Umehara N, 2020, 'Subtractive Processes — Non-Traditional Operations', in Huang Y; Wang L; Liang SY (ed.), Handbook of Manufacturing, World Scientific Publishing Co. Pte. Ltd, Singapore, pp. 95 - 190, http://dx.doi.org/10.1142/9789813271029_0003

Ali Y; Wang J, 2010, 'Impact Abrasive Machining', in Jackson MJ; Davim JP (ed.), Machining with Abrasives, Springer, NY Dordrecht Heidelberg London, pp. 385 - 419

Feng YX; Huang CZ; Wang J; Hou RG; Lu XY, 2007, 'An Experimental Study on Milling Al₂O₃ Ceramics with Abrasive Waterjet', in Key Engineering Materials, Trans Tech Publications Ltd., pp. 500 - 504, http://dx.doi.org/10.4028/0-87849-430-8.500

Hou RG; Huang CZ; Wang J; Lu XY; Feng YX, 2007, 'Simulation of Solid-Liquid Two-Phase Flow Inside and Outside the Abrasive Water Jet Nozzle', in Key Engineering Materials, Trans Tech Publications Ltd., pp. 453 - 457, http://dx.doi.org/10.4028/0-87849-430-8.453

Wang X; Wang J, 2006, 'Abrasive Water Jet Machining', in Wang Y (ed.), China Materials Engineering Canon, Chapter 4 in Volume 25/Part 5 Materials High-Energy Beam Machining Technologies, Chemical Industry Press, Beijing, pp. 125 - 145

Wang J, 2003, 'Economic optimization of machining operations in computer-aided manufacturing systems', in Leondes CT (ed.), Major Reference Work on Computer Aided and Integrated Manufacturing Systems - Volume 5 Manufacturing Processes, World Scientific, Singapore, pp. 131 - 160

Edited Books

Wang J; Liu D; Nguyen T, (eds.), 2018, Advances in Materials Processing XIII, Proceedings of the 13th Asia-Pacific Conference on Materials Processing

Krajnik P; Rashid A; Aoyama H; Xu XP; Wang J, (eds.), 2016, Advances in Abrasive Technology XIX, Tans Tech Publicaitons, Switzerland

Liu GJ; Wang J, (ed.), 2016, Advances in Material Processing XII, Trans Tech Publications, Switzerland

Yuan JL; Chen M; Wang J; Zhou LB; Lv BH, (eds.), 2013, Advances in Abrasive Technology XVI, Trans Tech Publications, Switzerland, http://www.ttp.net/978-3-03785-825-7.html

Zhang Y; Buttler DL; Wang J; Li X; Yui A; Zhou L, (eds.), 2012, Advances in Abrasive Technology XV, Trans Tech Publications, Switzerland

Huang C; Zhu H; Wang J; Li X, (eds.), 2012, Advances in Materials Processing X, Trans Tech Publications, Switzerland, http://www.scopus.com/inward/record.url?eid=2-s2.0-84860775646&partnerID=40&md5=6ba8cc5286792a8a8bed42dc05525a44

Wang J; Mathew P; Li X; Huang C; Zhu H, (eds.), 2010, Advances in Materials Processing IX, Trans Tech Publications, http://www.scopus.com/inward/record.url?eid=2-s2.0-77955457068&partnerID=40&md5=cb97b67b2e534ff963c45b182e16c898

Yan Q; Liu J; Wang J; Gao H, (eds.), 2010, Surface Finishing Technology and Surface Engineering II, Trans Tech Publications, http://www.scopus.com/inward/record.url?eid=2-s2.0-78651243712&partnerID=40&md5=eaffcc3a2679d38e0799924083bd4046

Huang H; Zhang L; Wang J; Jiang Z; Zhou L; Xu X, (eds.), 2009, Advances in Abrasive Technology XII, Trans Tech Publications, Switzerland

Guo D; Wang J; Jia Z; Kang R; Gao H; Wang X, (eds.), 2009, Advances in Materials Manufacturing Science and Technology XIII - Volume 1, Trans Tech Publications Ltd

Guo D; Wang J; Jia Z; Kang R; Gao H; Wang X, (eds.), 2009, Advances in Materials Manufacturing Science and Technology XIII - Volume 2, Trans Tech Publications Ltd

Wang C; Li X; Wang J, (eds.), 2008, Proceedings of the 8th Asia-Pacific Conference on Materials Processing, Frontiers in Design and Manufacturing Publications

Guo D; Kuriyagawa T; Wang J; Tamaki J, (eds.), 2007, Advances in Abrasive Technology IX, Trans Tech Publications

Gao H; Wang J; Wang X; Guo D, (eds.), 2006, Advances in Abrasive Machining and Surfacing Technologies: Proceedings of International Conference on Surface Finish Technology and Surface Engineering, Frontiers in Design and Manufacturing Publications

Jia Z; Wang X; Guo D; Wang J, (eds.), 2006, Current Development in Abrasive Technology: Proceedings of 9th International Symposium on Advances in Abrasive Technology, Frontiers in Design and Manufacturing Publications

Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing Vol. 2, Frontiers in Design and Manufacturing Publications

Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing Vol. 3, Frontiers in Design and Manufacturing Publications

Zhang X; Wang C; Wang J, (eds.), 2006, Design and Manufacturing for Sustainable Development: Proceedings of the 7th International Conference on Frontiers in Design and Manufacturing, Vol. 1, Frontiers in Design and Manufacturing Publications

Wang J; Guo D; Wang D; Wang J, (eds.), 2002, Frontiers in Design and Manufacturing: Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Vol. 1, ICFDM publication

Guo D; Wang D; Wang J, (eds.), 2002, Frontiers in Design and Manufacturing: Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Vol. 2, ICFDM publication

Wang J; Scott W; Zhang L, (eds.), 1999, Abrasive Technology: Current Development and Applications I, World Scientific Publisher, Singapore

Journal articles

Zheng L; Li Y; Sun Z; Luo Y; Xu Y; Wang J; Wang C; Wei X, 2025, 'Quantitative Detection of Micro Hole Wall Roughness in PCBs Based on Improved U-Net Model', Chinese Journal of Mechanical Engineering English Edition, 38, http://dx.doi.org/10.1186/s10033-025-01245-3

Wang J; Guo P; Li J; Wang J; Wang J; Zhang S, 2025, 'Point clouds restoration of milling surfaces with considering micro-nano scale geometric features', Measurement Journal of the International Measurement Confederation, 255, http://dx.doi.org/10.1016/j.measurement.2025.118055

Li B; Huang C; Chen Z; Liu H; Niu J; Wang J; Wang Z; Xu L; Huang S, 2025, 'Change of the machined hole wall surface roughness, microstructure and microhardness of low alloy steel caused by drill-guide-pads during BTA deep hole drilling', International Journal of Advanced Manufacturing Technology, 139, pp. 1595 - 1605, http://dx.doi.org/10.1007/s00170-025-15989-8

Wang J; Jing Y; Du X; Zheng L; Wang C; Chen P, 2025, 'Abrasive Waterjet Machining - State of the Art and Future Perspectives', Jixie Gongcheng Xuebao Journal of Mechanical Engineering, 61, pp. 46 - 77, http://dx.doi.org/10.3901/JME.2025.09.046

Zhang Y; Ding Y; Wang J; Hou R; Zheng M; Ma D; Huang J; Li W; Zhao Q; Sun Z; Li W; Wang J; Zhu S; Wang L; Wu X; Guan S, 2024, 'Study on degradation behavior of porous magnesium alloy scaffold loaded with rhBMP-2 and repair of bone defects', Journal of Materials Research and Technology, 30, pp. 6498 - 6507, http://dx.doi.org/10.1016/j.jmrt.2024.04.227

Zhang Y; Zhang Z; Wang J; Qin J; Huang S; Xue G; Liu Y, 2024, 'Research on Excitation Estimation for Ocean Wave Energy Generators Based on Extended Kalman Filtering', Energies, 17, http://dx.doi.org/10.3390/en17030704

Zhang R; Huang C; Wang J; Wang Q; Feng S; Zhao W; Tang A, 2024, 'Analysis of the microscopic characteristics of periodic structure arrays on silicon carbide fabricated by femtosecond laser', Ceramics International, 50, pp. 1193 - 1204, http://dx.doi.org/10.1016/j.ceramint.2023.10.212

Wang Y; Yan C; Mei D; Li Y; Sheng K; Wang J; Wang L; Zhu S; Guan S, 2024, 'Optimized structure design of asymmetrical Mg alloy cerebrovascular stent with high flexibility', Smart Materials in Manufacturing, 2, http://dx.doi.org/10.1016/j.smmf.2023.100040

Pan Y; Li K; Hu A; Zhao C; Zhang Y; Jiang X; Li B; Wang J; Long J, 2023, 'Manipulating Li2O2 deposition morphology by surface spin modulation of cobalt-based spinel oxide catalysts in lithium−oxygen batteries', Chemical Engineering Journal, 477, http://dx.doi.org/10.1016/j.cej.2023.147209

Wang J; Liu J; Li L, 2023, 'Topology Optimization for Digital Light Projector Additive Manufacturing Addressing the In-Situ Structural Strength Issue', Polymers, 15, http://dx.doi.org/10.3390/polym15173573

Wang H; Feng W; Liu D; Zhang G; Liu Y; Wang J; Zou L, 2023, 'Iron-based Soft Magnetic Materials Fabricated by Laser Additive Manufacturing', Engineered Science, 22, http://dx.doi.org/10.30919/es8d809

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2022, 'Prediction of tool wear width size and optimization of cutting parameters in milling process using novel ANFIS-PSO method', Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 236, pp. 111 - 122, http://dx.doi.org/10.1177/0954405420935262

Xu LH; Huang CZ; Niu JH; Wang J; Liu HL; Wang XD, 2021, 'Prediction of cutting power and surface quality, and optimization of cutting parameters using new inference system in high-speed milling process', Advances in Manufacturing, 9, pp. 388 - 402, http://dx.doi.org/10.1007/s40436-020-00339-6

Li M; Nguyen T; Wang J, 2021, 'Strip formation mechanisms and characteristics models in 3D printing of viscous polymer inks', Journal of Manufacturing Processes, 69, pp. 331 - 339, http://dx.doi.org/10.1016/j.jmapro.2021.08.009

Liu D; Huang C; Wang J; Zhu H, 2021, 'Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach', Ceramics International, 47, pp. 15165 - 15172, http://dx.doi.org/10.1016/j.ceramint.2021.02.076

Zhang P; Huang C; Zhu H; Wang J; Yao Y; Yao P, 2021, 'The research of tool wear criterion in micro cutting using the elastic recovery ratio of high-strength elastic alloy 3J33B', International Journal of Advanced Manufacturing Technology, 114, pp. 1767 - 1776, http://dx.doi.org/10.1007/s00170-021-06937-3

Xu L; Huang C; Niu J; Li C; Wang J; Liu H; Wang X, 2021, 'An improved case-based reasoning method and its application to predict machining performance', Soft Computing, 25, pp. 5683 - 5697, http://dx.doi.org/10.1007/s00500-020-05564-6

Gao T; Li C; Yang M; Zhang Y; Jia D; Ding W; Debnath S; Yu T; Said Z; Wang J, 2021, 'Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant', Journal of Materials Processing Technology, 290, http://dx.doi.org/10.1016/j.jmatprotec.2020.116976

Chen Y; Wang J; An Q, 2021, 'Mechanisms and predictive force models for machining with rake face textured cutting tools under orthogonal cutting conditions', International Journal of Mechanical Sciences, 195, http://dx.doi.org/10.1016/j.ijmecsci.2020.106246

Xu L; Huang C; Li C; Wang J; Liu H; Wang X, 2021, 'An improved case based reasoning method and its application in estimation of surface quality toward intelligent machining', Journal of Intelligent Manufacturing, 32, pp. 313 - 327, http://dx.doi.org/10.1007/s10845-020-01573-2

Yun H; Zou B; Wang J; Huang C; Shi Z, 2021, 'Assessment of cyclic utilization of coated cemented carbide inserts for turning of Inconel 718', International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-020-06520-2

Back to profile page