By Dr Matthew Doolan

Journal articles

He D; Keith DR; Kim HC; De Kleine R; Anderson J; Doolan M, 2024, 'Materials Challenges in the Electric Vehicle Transition', Environmental Science and Technology, 58, pp. 12297 - 12303, http://dx.doi.org/10.1021/acs.est.3c09042

He D; Kim HC; Sommacal S; Stojcevski F; Soo VK; Lipiński W; Morozov E; Henderson LC; Compston P; Doolan M, 2023, 'Improving mechanical and life cycle environmental performances of recycled CFRP automotive component by fibre architecture preservation', Composites Part A Applied Science and Manufacturing, 175, http://dx.doi.org/10.1016/j.compositesa.2023.107749

Sexton A; Doolan M, 2023, 'Effect of electrode misalignment on the quality of resistance spot welds', Manufacturing Letters, 35, pp. 952 - 957, http://dx.doi.org/10.1016/j.mfglet.2023.08.017

Fernando C; Buttriss G; Yoon HJ; Soo VK; Compston P; Doolan M, 2023, 'Integration of consumer preferences into dynamic life cycle assessment for the sharing economy: methodology and case study for shared mobility', International Journal of Life Cycle Assessment, 28, pp. 429 - 461, http://dx.doi.org/10.1007/s11367-023-02148-y

He D; Kim HC; De Kleine R; Soo VK; Kiziltas A; Compston P; Doolan M, 2022, 'Life cycle energy and greenhouse gas emissions implications of polyamide 12 recycling from selective laser sintering for an injection-molded automotive component', Journal of Industrial Ecology, 26, pp. 1378 - 1388, http://dx.doi.org/10.1111/jiec.13277

Soo VK; Doolan M; Compston P; Duflou JR; Peeters J; Umeda Y, 2021, 'The influence of end-of-life regulation on vehicle material circularity: A comparison of Europe, Japan, Australia and the US', Resources Conservation and Recycling, 168, http://dx.doi.org/10.1016/j.resconrec.2020.105294

He D; Soo VK; Stojcevski F; Lipiński W; Henderson LC; Compston P; Doolan M, 2020, 'The effect of sizing and surface oxidation on the surface properties and tensile behaviour of recycled carbon fibre: An end-of-life perspective', Composites Part A Applied Science and Manufacturing, 138, http://dx.doi.org/10.1016/j.compositesa.2020.106072

He D; Soo VK; Kim HC; Compston P; Doolan M, 2020, 'Comparative life cycle energy analysis of carbon fibre pre-processing, processing and post-processing recycling methods', Resources Conservation and Recycling, 158, http://dx.doi.org/10.1016/j.resconrec.2020.104794

Soo VK; Peeters J; Paraskevas D; Compston P; Doolan M; Duflou JR, 2018, 'Sustainable aluminium recycling of end-of-life products: A joining techniques perspective', Journal of Cleaner Production, 178, pp. 119 - 132, http://dx.doi.org/10.1016/j.jclepro.2017.12.235

Soo VK; Compston P; Doolan M, 2017, 'The influence of joint technologies on ELV recyclability', Waste Management, 68, pp. 421 - 433, http://dx.doi.org/10.1016/j.wasman.2017.07.020

Adams DW; Summerville CDE; Voss BM; Jeswiet J; Doolan MC, 2017, 'Correlating variations in the dynamic resistance signature to weld strength in resistance spot welding using principal component analysis', Journal of Manufacturing Science and Engineering Transactions of the ASME, 139, http://dx.doi.org/10.1115/1.4034887

Voss BM; Pereira MP; Rolfe BF; Doolan MC, 2017, 'A new methodology for measuring galling wear severity in high strength steels', Wear, 390-391, pp. 334 - 345, http://dx.doi.org/10.1016/j.wear.2017.09.002

McAnulty T; Jeswiet J; Doolan M, 2017, 'Formability in single point incremental forming: A comparative analysis of the state of the art', CIRP Journal of Manufacturing Science and Technology, 16, pp. 43 - 54, http://dx.doi.org/10.1016/j.cirpj.2016.07.003

Summerville C; Adams D; Compston P; Doolan M, 2017, 'Nugget Diameter in Resistance Spot Welding: A Comparison between a Dynamic Resistance Based Approach and Ultrasound C-scan', Procedia Engineering, 183, pp. 257 - 263, http://dx.doi.org/10.1016/j.proeng.2017.04.033

Moloney B; Doolan M, 2016, 'A Comparison of Obstacles in Emerging and Developed Nation Dry Waste Recovery', Procedia CIRP, 40, pp. 347 - 352, http://dx.doi.org/10.1016/j.procir.2016.01.061

Soo VK; Compston P; Doolan M, 2016, 'Is the Australian Automotive Recycling Industry Heading towards a Global Circular Economy? - A Case Study on Vehicle Doors', Procedia CIRP, 48, pp. 10 - 15, http://dx.doi.org/10.1016/j.procir.2016.03.099

Yu ZY; Soo VK; Doolan M, 2016, 'The Effect of Consumer Behaviour on the Life Cycle Assessment of Energy Efficient Lighting Technologies', Procedia CIRP, 40, pp. 185 - 190, http://dx.doi.org/10.1016/j.procir.2016.01.097

Boyden A; Soo VK; Doolan M, 2016, 'The Environmental Impacts of Recycling Portable Lithium-Ion Batteries', Procedia CIRP, 48, pp. 188 - 193, http://dx.doi.org/10.1016/j.procir.2016.03.100

Jeswiet J; Adams D; Doolan M; McAnulty T; Gupta P, 2015, 'Single point and asymmetric incremental forming', Advances in Manufacturing, 3, pp. 253 - 262, http://dx.doi.org/10.1007/s40436-015-0126-1

Adams D; McAnulty T; Doolan M, 2015, 'Experimental testing of an analytical model for membrane strains in single point incremental forming', Key Engineering Materials, 639, pp. 187 - 194, http://dx.doi.org/10.4028/www.scientific.net/KEM.639.187

Soo VK; Compston P; Doolan M, 2015, 'Interaction between new car design and recycling impact on life cycle assessment', Procedia CIRP, 29, pp. 426 - 431, http://dx.doi.org/10.1016/j.procir.2015.02.055

El Halabi E; Third M; Doolan M, 2015, 'Machine-based dismantling of end of life vehicles: A life cycle perspective', Procedia CIRP, 29, pp. 651 - 655, http://dx.doi.org/10.1016/j.procir.2015.02.078

Sexton A; Cantwell W; Doolan M; Kalyanasundaram S, 2014, 'Investigation of the deformation behaviour of a thermoplastic fibre metal laminate', Materials Science Forum, 773-774, pp. 503 - 511, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.503

Soo VK; Doolan M, 2014, 'Recycling mobile phone impact on life cycle assessment', Procedia CIRP, 15, pp. 263 - 271, http://dx.doi.org/10.1016/j.procir.2014.06.005

Doolan M; Kalyanasundaram S; Cardew-Hall M; Hodgson P, 2003, 'Use of image recognition techniques in the analysis of sheet metal forming force signature curves', Journal of Manufacturing Science and Engineering, 125, pp. 363 - 368, http://dx.doi.org/10.1115/1.1559164

Doolan MC; Kalyanasundaram S; Hodgson P; Cardew-Hall M, 2001, 'Identifying variation in sheet metal stamping', Journal of Materials Processing Technology, 115, pp. 142 - 146, http://dx.doi.org/10.1016/S0924-0136(01)00754-3

O'Byrne S; Doolan M; Olsen SR; Houwing AFP, 2000, 'Analysis of transient thermal choking processes in a model scramjet engine', Journal of Propulsion and Power, 16, pp. 808 - 814, http://dx.doi.org/10.2514/2.5645

O'Byrne S; Doolan M; Olsen SR; Houwing AFP, 1999, 'Measurement and imaging of supersonic combustion in a model scramjet engine', Shock Waves, 9, pp. 221 - 226, http://dx.doi.org/10.1007/s001930050159

Back to profile page