By Dr Juan Pablo Escobedo-Diaz

Journal articles

Shah S; Hazell PJ; Wang H; Escobedo JP, 2025, 'Shock response of unidirectional carbon fibre-reinforced polymer composites: Influence of fibre orientation and volume fraction', Composites Part B Engineering, 299, http://dx.doi.org/10.1016/j.compositesb.2025.112438

Dura HB; Hazell PJ; Wang H; Escobedo-Diaz JP; Dong H, 2025, 'Investigation of 3D-printed dual-fibre bio-inspired fish-scale-based hierarchical composites subjected to low-velocity impact', Materials Today Communications, 46, http://dx.doi.org/10.1016/j.mtcomm.2025.112882

Mammone M; Panta J; Mildren RP; Wang J; Escobedo-Diaz J; Mcgarva L; Ibrahim M; Sharp A; Yang R; Zhang YX, 2025, 'Advanced characterization of thermal degradation mechanisms in carbon fibre-reinforced polymer composites under continuous wave laser irradiation', Composites Part A Applied Science and Manufacturing, 192, http://dx.doi.org/10.1016/j.compositesa.2025.108817

Kader MA; Wares MA; Islam MA; Hazell PJ; Escobedo JP; Saadatfar M, 2025, 'Dynamic Deformation Mechanisms and Mechanical Properties of Additively Manufactured Closed-Cell Foams of Various Topologies', Advanced Engineering Materials, 27, http://dx.doi.org/10.1002/adem.202401892

Dong H; Wang H; Hazell PJ; Sun N; Dura HB; Escobedo-Diaz JP, 2025, 'Effects of printing parameters on the quasi-static and dynamic compression behaviour of 3D-printed re-entrant auxetic structures', Thin Walled Structures, 210, http://dx.doi.org/10.1016/j.tws.2025.113000

Shah S; Hazell PJ; Wang H; Escobedo JP, 2025, 'Shock wave mitigation using periodically discrete material layers of variable orientation: Experiments and simulations', Journal of Applied Physics, 137, http://dx.doi.org/10.1063/5.0249356

Islam MK; Hazell PJ; Wang H; Escobedo JP; Chowdhury H, 2025, 'Quasi-Static and Low-Velocity Impact Response of 3D Printed Plates Using Bio-Inspired Tool Paths', Biomimetics, 10, http://dx.doi.org/10.3390/biomimetics10030135

Siddique SH; Hazell PJ; Pereira GG; Wang H; Escobedo JP, 2025, 'Impact response of 3D printed cornstalk-inspired structures: The effect of indenter shape on penetration', International Journal of Impact Engineering, 195, http://dx.doi.org/10.1016/j.ijimpeng.2024.105143

Peng Z; Xie KY; Zhang M; Li J; Li B; Monteiro SN; Soman R; Hwang JY; Kalay YE; Escobedo-Diaz JP; Carpenter JS; Brown AD; Ikhmayies S, 2025, 'Preface', Minerals Metals and Materials Series, pp. v - vi

Shah S; Hazell PJ; Wang H; Escobedo JP, 2025, 'Shock Wave Mitigation in Heterogeneous Systems: A Review', Journal of Dynamic Behavior of Materials, http://dx.doi.org/10.1007/s40870-025-00466-w

Dura HB; Hazell PJ; Wang H; Escobedo-Diaz JP; Wang J, 2024, 'Energy absorption of composite 3D-printed fish scale inspired protective structures subjected to low-velocity impact', Composites Science and Technology, 255, http://dx.doi.org/10.1016/j.compscitech.2024.110725

Cavenagh R; Hazell PJ; Weerasinghe D; Wang H; Wang J; Mohotti D; Fraser D; Escobedo JP, 2024, 'Influence of the cover plate thickness on the ballistic penetration of re-entrant auxetic structures', International Journal of Impact Engineering, 186, http://dx.doi.org/10.1016/j.ijimpeng.2024.104890

Khani Aminjan K; Escobedo-Diaz JP; Heidari M; Rahmanivahid P; Khashehchi M; Marami Milani S; Salahinezhad M, 2023, 'Comment on “DPM-LES investigation on flow field dynamic and acoustic characteristics of a twin-fluid nozzle by multi-field coupling method”', International Journal of Heat and Mass Transfer, 217, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2023.124678

Colorado HA; Cardenas CA; Gutierrez-Velazquez EI; Escobedo JP; Monteiro SN, 2023, 'Additive manufacturing in armor and military applications: research, materials, processing technologies, perspectives, and challenges', Journal of Materials Research and Technology, 27, pp. 3900 - 3913, http://dx.doi.org/10.1016/j.jmrt.2023.11.030

Bahadur Dura H; Hazell PJ; Wang H; Escobedo-Diaz JP, 2023, 'Effect of scale morphology on the mechanical response of bio-inspired fish-scale-based protective structures', Composites Part A Applied Science and Manufacturing, 174, http://dx.doi.org/10.1016/j.compositesa.2023.107720

Wang J; East D; Morozov EV; Wang H; Hazell PJ; Escobedo-Diaz JP, 2023, 'Dynamic mechanical response and fracture behaviour of Ti–Ni–C composites fabricated by directed energy deposition', Materials Science and Engineering A, 885, http://dx.doi.org/10.1016/j.msea.2023.145629

Serubibi A; Hazell PJ; Escobedo JP; Wang H; Oromiehie E; Prusty GB; Phillips AW; St John NA, 2023, 'Fibre-metal laminate structures: High-velocity impact, penetration, and blast loading – A review', Composites Part A Applied Science and Manufacturing, 173, http://dx.doi.org/10.1016/j.compositesa.2023.107674

Sindhumathi R; Krishnaraj V; Escobedo JP; Nampoothiri J; Prasanth AS, 2023, 'Effect of impactor velocity on low velocity impact behavior of Al/SiC monocoque interpenetrating composites', Materials Today Communications, 36, http://dx.doi.org/10.1016/j.mtcomm.2023.106642

Wang H; Weerasinghe D; Hazell PJ; Mohotti D; Morozov EV; Escobedo-Diaz JP, 2023, 'Ballistic impact response of flexible and rigid UHMWPE textile composites: Experiments and simulations', Defence Technology, 22, pp. 37 - 53, http://dx.doi.org/10.1016/j.dt.2022.08.009

Siddique SH; Hazell PJ; Pereira GG; Wang H; Escobedo JP; Ameri AAH, 2023, 'On the Mechanical Behaviour of Biomimetic Cornstalk-Inspired Lightweight Structures', Biomimetics, 8, pp. 92, http://dx.doi.org/10.3390/biomimetics8010092

Khani Aminjan K; Ghodrat M; Heidari M; Rahmanivahid P; Naghdi Khanachah S; Chitt M; Escobedo-Diaz JP, 2023, 'Numerical and experimental investigation to design a novel morphing airfoil for performance optimization', Propulsion and Power Research, 12, pp. 83 - 103, http://dx.doi.org/10.1016/j.jppr.2023.02.004

Weerasinghe D; Breen S; Wang H; Mohotti D; Hazell PJ; Escobedo-Diaz JP, 2022, 'Impact resistance and yarn pull-out behaviour of polymer spray-coated UHMWPE fabrics', Materials Today Communications, 33, http://dx.doi.org/10.1016/j.mtcomm.2022.104473

Siddique SH; Hazell PJ; Wang H; Escobedo JP; Ameri AAH, 2022, 'Lessons from nature: 3D printed bio-inspired porous structures for impact energy absorption – A review', Additive Manufacturing, 58, pp. 103051, http://dx.doi.org/10.1016/j.addma.2022.103051

Khani Aminjan K; Ghodrat M; Escobedo-diaz JP; Heidari M; Chitt M; Hajivand M, 2022, 'Study on inlet pressure and Reynolds number in pressure-swirl atomizer with spiral path', International Communications in Heat and Mass Transfer, 137, http://dx.doi.org/10.1016/j.icheatmasstransfer.2022.106231

Prasanth AS; Krishnaraj V; Nampoothiri J; Sindhumathi R; Sadik MRA; Escobedo JP; Shankar K, 2022, 'Uniaxial Compressive Behavior of AA5083/SiC Co-Continuous Ceramic Composite Fabricated by Gas Pressure Infiltration for Armour Applications', Journal of Composites Science, 6, http://dx.doi.org/10.3390/jcs6020036

Ameri A; Wang H; Li Z; Quadir Z; Gonzalez M; Hazell PJ; Escobedo-Diaz JP, 2022, 'Spall strength dependence on peak stress and deformation history in Lean Duplex Stainless Steel 2101', Materials Science and Engineering A, 831, http://dx.doi.org/10.1016/j.msea.2021.142158

Islam MK; Wang H; Hazell PJ; Kader MA; Escobedo JP, 2022, 'Quasi-static response of horse hoof inspired biomimetic structures', Materials Today Proceedings, 59, pp. 1168 - 1173, http://dx.doi.org/10.1016/j.matpr.2022.03.185

Islam MK; Hazell PJ; Escobedo JP; Wang H, 2021, 'Biomimetic armour design strategies for additive manufacturing: A review', Materials and Design, 205, http://dx.doi.org/10.1016/j.matdes.2021.109730

Shakeriaski F; Ghodrat M; Escobedo-Diaz J; Behnia M, 2021, 'The nonlinear thermo-hyperelasticity wave propagation analysis of near-incompressible functionally graded medium under mechanical and thermal loadings', Archive of Applied Mechanics, 91, pp. 3075 - 3094, http://dx.doi.org/10.1007/s00419-021-01951-z

Kader MA; Hazell PJ; Islam MA; Ahmed S; Hossain MM; Escobedo JP; Saadatfar M, 2021, 'Strain-rate dependency and impact dynamics of closed-cell aluminium foams', Materials Science and Engineering A, 818, http://dx.doi.org/10.1016/j.msea.2021.141379

Wang J; East D; Morozov EV; Seeber A; Escobedo-Diaz JP, 2021, 'Microstructure and hardness variation of additively manufactured Ti–Ni–C functionally graded composites', Journal of Alloys and Compounds, 865, http://dx.doi.org/10.1016/j.jallcom.2021.158976

Li Z; Ameri AAH; Hazell PJ; Khennane A; Escobedo-Diaz JP; Aryal B; Wang H, 2021, 'Effects of impactor mass on the low-velocity impact behaviour of thick GFRP pultruded laminates', Construction and Building Materials, 279, http://dx.doi.org/10.1016/j.conbuildmat.2021.122491

Shakeriaski F; Ghodrat M; Escobedo-Diaz J; Behnia M, 2021, 'Modified Green-Lindsay thermoelasticity wave propagation in elastic materials under thermal shocks', Journal of Computational Design and Engineering, 8, pp. 36 - 54, http://dx.doi.org/10.1093/jcde/qwaa061

Shakeriaski F; Ghodrat M; Escobedo-Diaz J; Behnia M, 2021, 'Recent advances in generalized thermoelasticity theory and the modified models: A review', Journal of Computational Design and Engineering, 8, pp. 15 - 35, http://dx.doi.org/10.1093/jcde/qwaa082

Ameri A; Wang H; Li Z; Quadir Z; Rickard WDA; Gonzalez M; Hazell PJ; Escobedo-Diaz JP, 2021, 'Ferrite phase transformation in dual-phase steel under shock loading', Materials Science and Engineering A, 802, http://dx.doi.org/10.1016/j.msea.2020.140690

Chen Y; Ye L; Escobedo-Diaz JP; Zhang YX, 2021, 'Effect of initiator geometry on energy absorption of CFRP tubes under dynamic crushing', International Journal of Crashworthiness, 26, pp. 526 - 536, http://dx.doi.org/10.1080/13588265.2020.1761585

Vijayan K; Ramalingam S; Raeez Akthar Sadik M; Prasanth AS; Nampoothiri J; Pablo Escobedo-Diaz J; Shankar K, 2021, 'Fabrication of Co-Continuous ceramic composite (C4) through gas pressure infiltration technique', Materials Today Proceedings, 46, pp. 1013 - 1016, http://dx.doi.org/10.1016/j.matpr.2021.01.212

Shakeriaski F; Ghodrat M; Escobedo-Diaz J; Behnia M, 2021, 'Modified Green-Lindsay thermoelasticity wave propagation in elastic materials under thermal shocks', JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, 8, pp. 36 - 54, http://dx.doi.org/10.1093/jcde.qwaa061

Morrow BM; Escobedo-Diaz JP; Jones DR; Trujillo CP; Martinez DT; Rigg PA; Harvey CR; Gray III GT; Cerreta EK, 2021, 'Shock-reshock of zirconium to explore the effect of microstructure on the alpha-omega phase transformation', EPJ Web of Conferences, 250, pp. 03010 - 03010, http://dx.doi.org/10.1051/epjconf/202125003010

Islam MA; Kader MA; Hazell PJ; Escobedo JP; Brown AD; Saadatfar M, 2020, 'Effects of impactor shape on the deformation and energy absorption of closed cell aluminium foams under low velocity impact', Materials and Design, 191, http://dx.doi.org/10.1016/j.matdes.2020.108599

Kader MA; Brown AD; Hazell PJ; Robins V; Escobedo JP; Saadatfar M, 2020, 'Geometrical and topological evolution of a closed-cell aluminium foam subject to drop-weight impact: An X-ray tomography study', International Journal of Impact Engineering, 139, http://dx.doi.org/10.1016/j.ijimpeng.2020.103510

Fu K; Wang H; Zhang YX; Ye L; Escobedo JP; Hazell PJ; Friedrich K; Dai S, 2020, 'Rheological and energy absorption characteristics of a concentrated shear thickening fluid at various temperatures', International Journal of Impact Engineering, 139, http://dx.doi.org/10.1016/j.ijimpeng.2020.103525

Wang H; Hazell PJ; Shankar K; Morozov EV; Jovanoski Z; Brown AD; Li Z; Escobedo-Diaz JP, 2020, 'Tensile properties of ultra-high-molecular-weight polyethylene single yarns at different strain rates', Journal of Composite Materials, 54, pp. 1453 - 1466, http://dx.doi.org/10.1177/0021998319883416

Kader MA; Hazell PJ; Brown AD; Tahtali M; Ahmed S; Escobedo JP; Saadatfar M, 2020, 'Novel design of closed-cell foam structures for property enhancement', Additive Manufacturing, 31, http://dx.doi.org/10.1016/j.addma.2019.100976

Aryal B; Morozov EV; Wang H; Shankar K; Hazell PJ; Escobedo-Diaz JP, 2019, 'Effects of impact energy, velocity, and impactor mass on the damage induced in composite laminates and sandwich panels', Composite Structures, 226, http://dx.doi.org/10.1016/j.compstruct.2019.111284

Chen Y; Ye L; Escobedo-Diaz JP; Zhang YX; Fu K, 2019, 'Quasi-static and dynamic progressive crushing of CF/EP composite sandwich panels under in-plane localised compressive loads', Composite Structures, 222, http://dx.doi.org/10.1016/j.compstruct.2019.04.011

Ameri A; Quadir Z; Ashraf M; Logos C; Escobedo-Diaz J, 2019, 'Effects of load partitioning and texture on the plastic anisotropy of duplex stainless steel alloys under quasi-static loading conditions', Materials Science and Engineering A, 752, pp. 24 - 35, http://dx.doi.org/10.1016/j.msea.2019.02.090

Ameri AAH; Brown AD; Ashraf M; Hazell PJ; Quadir MZ; Escobedo-Diaz JP, 2019, 'An Effective Pulse-Shaping Technique for Testing Stainless Steel Alloys in a Split-Hopkinson Pressure Bar', Journal of Dynamic Behavior of Materials, 5, pp. 39 - 50, http://dx.doi.org/10.1007/s40870-019-00181-3

Brown AD; Walters JB; Zhang YX; Saadatfar M; Escobedo-Diaz JP; Hazell PJ, 2019, 'The mechanical response of commercially available bone simulants for quasi-static and dynamic loading', Journal of the Mechanical Behavior of Biomedical Materials, 90, pp. 404 - 416, http://dx.doi.org/10.1016/j.jmbbm.2018.10.032

Islam MA; Brown AD; Hazell PJ; Kader MA; Escobedo JP; Saadatfar M; Xu S; Ruan D; Turner M, 2018, 'Mechanical response and dynamic deformation mechanisms of closed-cell aluminium alloy foams under dynamic loading', International Journal of Impact Engineering, 114, pp. 111 - 122, http://dx.doi.org/10.1016/j.ijimpeng.2017.12.012

Back to profile page