By Dr Ehsan Farabi

Journal articles

Farabi E; Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2025, 'On the role of the forging route in industrial manufacturing of Alloy 718 engine disks', Materials and Design, 258, pp. 114743 - 114743, http://dx.doi.org/10.1016/j.matdes.2025.114743

Farabi E; Hodgson PD; Barnett MR; Fabijanic DM, 2025, 'Solid-state additive manufacturing of 420 stainless steel using additive friction stir deposition', Materials Science and Engineering A, 937, http://dx.doi.org/10.1016/j.msea.2025.148451

Farabi E; He X; Obersteiner D; Musi M; Neves J; Klein T; Primig S, 2025, 'Synergistic precipitation reactions in a novel high-temperature Ti-alloy', Scripta Materialia, 259, pp. 116543 - 116543, http://dx.doi.org/10.1016/j.scriptamat.2025.116543

Haines MP; Farabi E; Haghdadi N; Primig S, 2025, 'On the martensitic phase transformation and grain boundary character evolution in laser powder bed fusion 17-4 precipitation hardened stainless steel', Journal of Materials Science, 60, pp. 3430 - 3453, http://dx.doi.org/10.1007/s10853-025-10645-8

Lasisi AM; Farabi E; Klein T; Primig S, 2025, 'The influence of microstructure heterogeneity on the tensile deformation behaviour of cold metal transfer additively manufactured Ti6Al4V', Journal of Alloys and Compounds, 1010, pp. 178257 - 178257, http://dx.doi.org/10.1016/j.jallcom.2024.178257

Luo M; Rielli VV; Farabi E; Liao X; Ringer SP; Haghdadi N; Primig S; Vieira Rielli V, 2024, 'Grain boundary crystallography and segregation in Ni-based superalloy INC738 manufactured by electron-beam powder bed fusion in as-built and annealed conditions', Materials Characterization, 217, pp. 114421 - 114421, http://dx.doi.org/10.1016/j.matchar.2024.114421

Farabi E; Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2024, 'New insights into the kinetics of dynamic and post-dynamic softening in Alloy 718 engine disks', Materials and Design, 247, pp. 113423 - 113423, http://dx.doi.org/10.1016/j.matdes.2024.113423

Farabi E; Haghdadi N; Czettl C; Pachlhofer J; Rohrer GS; Ringer SP; Primig S, 2024, 'On the fcc to hcp transformation in a Co-Ru alloy: Variant selection and intervariant boundary character', Scripta Materialia, 248, pp. 116127 - 116127, http://dx.doi.org/10.1016/j.scriptamat.2024.116127

Farabi E; Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Ringer SP; Primig S; Vieira Rielli V, 2024, 'Advancing structure − property homogeneity in forged Alloy 718 engine disks: A pathway towards enhanced performance', Materials and Design, 242, pp. 112987, http://dx.doi.org/10.1016/j.matdes.2024.112987

Rielli VV; Luo M; Farabi E; Haghdadi N; Primig S; Vieira Rielli V, 2024, 'Interphase boundary segregation in IN738 manufactured via electron-beam powder bed fusion', Scripta Materialia, 244, pp. 116033, http://dx.doi.org/10.1016/j.scriptamat.2024.116033

Mirzaei A; Hodgson PD; Ma X; Peterson VK; Farabi E; Rohrer GS; Beladi H, 2024, 'The role of parent austenite grain size on the variant selection and intervariant boundary network in a lath martensitic steel', Materials Science and Engineering A, 889, http://dx.doi.org/10.1016/j.msea.2023.145793

Rielli VV; Farabi E; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2024, 'γʹ and γ″ co-precipitation phenomena in directly aged Alloy 718 with high δ-phase fractions', Materials & Design, 241, pp. 112961 - 112961, http://dx.doi.org/10.1016/j.matdes.2024.112961

Farabi E; Klein T; Schnall M; Primig S, 2023, 'Effects of high deposition rate during cold metal transfer additive manufacturing on microstructure and properties of Ti-6Al-4V', Additive Manufacturing, 71, pp. 103592, http://dx.doi.org/10.1016/j.addma.2023.103592

Moallemi M; Kim SJ; Zarei-Hanzaki A; Farabi E, 2023, 'Strain hardening analysis and deformation micromechanisms in high strength-high ductility metastable duplex stainless steels: Role of sustained stacking faults in the work hardening', Materials Characterization, 197, http://dx.doi.org/10.1016/j.matchar.2023.112662

Jalali MS; Zarei-Hanzaki A; Mosayebi M; Abedi HR; Malekan M; Kahnooji M; Farabi E; Kim SH, 2023, 'Unveiling the influence of dendrite characteristics on the slip/twinning activity and the strain hardening capacity of Mg-Sn-Li-Zn cast alloys', Journal of Magnesium and Alloys, 11, pp. 329 - 347, http://dx.doi.org/10.1016/j.jma.2022.03.016

Babaniaris S; Jiang L; Varma RK; Farabi E; Dorin T; Barnett M; Fabijanic D, 2022, 'Precipitation in AA6063 produced from swarf using additive friction stir deposition', Additive Manufacturing Letters, 3, http://dx.doi.org/10.1016/j.addlet.2022.100096

Khorasani M; Ghasemi AH; Farabi E; Leary M; Gibson I; Rolfe B, 2022, 'A comprehensive investigation of abrasive barrel finishing on hardness and manufacturability of laser-based powder bed fusion hollow components', International Journal of Advanced Manufacturing Technology, 120, pp. 3471 - 3490, http://dx.doi.org/10.1007/s00170-022-08903-z

Khorasani M; Ghasemi AH; Leary M; Cordova L; Sharabian E; Farabi E; Gibson I; Brandt M; Rolfe B, 2022, 'A comprehensive study on meltpool depth in laser-based powder bed fusion of Inconel 718', International Journal of Advanced Manufacturing Technology, 120, pp. 2345 - 2362, http://dx.doi.org/10.1007/s00170-021-08618-7

Farabi E; Babaniaris S; Barnett MR; Fabijanic DM, 2022, 'Microstructure and mechanical properties of Ti6Al4V alloys fabricated by additive friction stir deposition', Additive Manufacturing Letters, 2, http://dx.doi.org/10.1016/j.addlet.2022.100034

Beladi H; Farabi E; Hodgson PD; Barnett MR; Rohrer GS; Fabijanic D, 2022, 'Microstructure evolution of 316L stainless steel during solid-state additive friction stir deposition', Philosophical Magazine, 102, pp. 618 - 633, http://dx.doi.org/10.1080/14786435.2021.2011980

Farzaneh A; Khorasani M; Farabi E; Gibson I; Leary M; Ghasemi AH; Rolfe B, 2022, 'Sandwich structure printing of Ti-Ni-Ti by directed energy deposition', Virtual and Physical Prototyping, 17, pp. 1006 - 1030, http://dx.doi.org/10.1080/17452759.2022.2096647

Govindaraj V; Farabi E; Kada S; Hodgson PD; P Singh R; Rohrer GS; Beladi H, 2021, 'Effect of manganese on the grain boundary network of lath martensite in precipitation hardenable stainless steels', Journal of Alloys and Compounds, 886, http://dx.doi.org/10.1016/j.jallcom.2021.161333

Jalali MS; Zarei-Hanzaki A; Malekan M; Abedi HR; Mosayebi M; Kalantari AR; Farabi E; Kim SH, 2021, 'Substructure induced dendrite-fragmentation during thermomechanical processing of as-cast Mg-Sn-Li-Zn alloy', Materials Letters, 305, http://dx.doi.org/10.1016/j.matlet.2021.130690

Farabi E; Sharp J; Vahid A; Wang J; Fabijanic DM; Barnett MR; Corujeira Gallo S, 2021, 'Novel Biodegradable Zn Alloy with Exceptional Mechanical and in Vitro Corrosion Properties for Biomedical Applications', ACS Biomaterials Science and Engineering, 7, pp. 5555 - 5572, http://dx.doi.org/10.1021/acsbiomaterials.1c00763

Farabi E; Tari V; Hodgson PD; Rohrer GS; Rollett AD; Beladi H, 2021, 'The role of thermomechanical processing routes on the grain boundary network of martensite in Ti–6Al–4V', Materials Science and Engineering A, 822, http://dx.doi.org/10.1016/j.msea.2021.141665

Farabi E; Sharp JA; Vahid A; Fabijanic DM; Barnett MR; Gallo SC, 2021, 'Development of high strength and ductile Zn-Al-Li alloys for potential use in bioresorbable medical devices', Materials Science and Engineering C, 122, http://dx.doi.org/10.1016/j.msec.2021.111897

Khorasani M; Ghasemi AH; Awan US; Singamneni S; Littlefair G; Farabi E; Leary M; Gibson I; Veetil JK; Rolfe B, 2021, 'On the role of process parameters on meltpool temperature and tensile properties of stainless steel 316L produced by powder bed fusion', Journal of Materials Research and Technology, 12, pp. 2438 - 2452, http://dx.doi.org/10.1016/j.jmrt.2021.04.043

Jalali MS; Zarei-Hanzaki A; Malekan M; Abedi HR; Mosayebi M; Farabi E; Kim SH, 2020, 'Throughput study of diffusion along the twin boundaries in Mg-5Sn-0.3Li as-cast alloy and its effect on the homogenization during hot deformation', Materials Letters, 281, http://dx.doi.org/10.1016/j.matlet.2020.128446

Farabi E; Tari V; Hodgson PD; Rohrer GS; Beladi H, 2020, 'On the grain boundary network characteristics in a martensitic Ti–6Al–4V alloy', Journal of Materials Science, 55, pp. 15299 - 15321, http://dx.doi.org/10.1007/s10853-020-05075-7

Farabi E; Tari V; Hodgson PD; Rohrer GS; Beladi H, 2020, 'The role of phase transformation mechanism on the grain boundary network in a commercially pure titanium', Materials Characterization, 169, http://dx.doi.org/10.1016/j.matchar.2020.110640

Haftlang F; Zarei-Hanzaki A; Abedi HR; Málek J; Farabi E; Beladi H, 2020, 'Outstanding Mild Wear Performance of Ti–29Nb–14Ta–4.5Zr Alloy Through Subsurface Grain Refinement and Supporting Effect of Transformation Induced Plasticity', Metals and Materials International, 26, pp. 467 - 476, http://dx.doi.org/10.1007/s12540-019-00344-w

Emami M; Askari-Paykani M; Farabi E; Beladi H; Shahverdi HR, 2019, 'Development of New Third-Generation Medium Manganese Advanced High-Strength Steels Elaborating Hot-Rolling and Intercritical Annealing', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 50, pp. 4261 - 4274, http://dx.doi.org/10.1007/s11661-019-05352-4

Farabi E; Zarei-Hanzaki A; Moghaddam M; Hodgson PD; Beladi H, 2019, 'Microstructural evolution and mechanical properties of accumulative back extruded duplex (α + β) brass', Materials Characterization, 152, pp. 101 - 114, http://dx.doi.org/10.1016/j.matchar.2019.03.039

Zhang F; Chen C; Lv B; Ma H; Farabi E; Beladi H, 2019, 'Effect of pre-deformation mode on the microstructures and mechanical properties of Hadfield steel', Materials Science and Engineering A, 743, pp. 251 - 258, http://dx.doi.org/10.1016/j.msea.2018.11.088

Farabi E; Hodgson PD; Rohrer GS; Beladi H, 2018, 'Five-parameter intervariant boundary characterization of martensite in commercially pure titanium', Acta Materialia, 154, pp. 147 - 160, http://dx.doi.org/10.1016/j.actamat.2018.05.023

Teymoory P; Zarei-Hanzaki A; Farabi E; Monajati H; Abedi HR, 2018, 'Grain Refinement through Shear Banding in Severely Plastic Deformed A206 Aluminum Alloy', Advanced Engineering Materials, 20, http://dx.doi.org/10.1002/adem.201700502

Haghdadi N; Zarei-Hanzaki A; Farabi E; Cizek P; Beladi H; Hodgson PD, 2017, 'Strain rate dependence of ferrite dynamic restoration mechanism in a duplex low-density steel', Materials and Design, 132, pp. 360 - 366, http://dx.doi.org/10.1016/j.matdes.2017.07.009

Ghasemi E; Zarei-Hanzaki A; Farabi E; Tesař K; Jäger A; Rezaee M, 2017, 'Flow softening and dynamic recrystallization behavior of BT9 titanium alloy: A study using process map development', Journal of Alloys and Compounds, 695, pp. 1706 - 1718, http://dx.doi.org/10.1016/j.jallcom.2016.10.322

Moghaddam M; Zarei-Hanzaki A; Farabi E; Taheri-Mandarjani M, 2016, 'Approving Restoration Mechanism in 7075 Aluminum Alloy through Constitutive Flow Behavior Modeling', Advanced Engineering Materials, 18, pp. 989 - 1000, http://dx.doi.org/10.1002/adem.201500378

Farabi E; Zarei-Hanzaki A; Abedi HR, 2016, 'Processing Map Development through Elaborating Phenomenological and Physical Constitutive Based Models', Advanced Engineering Materials, 18, pp. 572 - 581, http://dx.doi.org/10.1002/adem.201500296

Farabi E; Zarei-Hanzaki A; Pishbin MH; Moallemi M, 2015, 'Rationalization of duplex brass hot deformation behavior: The role of microstructural components', Materials Science and Engineering A, 641, pp. 360 - 368, http://dx.doi.org/10.1016/j.msea.2015.06.042

Farabi E; Zarei-Hanzaki A; Abedi HR, 2015, 'High Temperature Formability Prediction of Dual Phase Brass Using Phenomenological and Physical Constitutive Models', Journal of Materials Engineering and Performance, 24, pp. 209 - 220, http://dx.doi.org/10.1007/s11665-014-1254-7

Back to profile page