By Dr Aleksandr Zinoviev

Journal articles

Ramadneh M; Rashed MG; Fraser D; Chavara DT; Zinoviev A; Bhattacharyya D; Hazell PJ; Zinovieva O, 2025, 'Ti6Al4V ELI microlattices produced by electron beam powder bed fusion: an investigation into the process-structure-property relationship across a wide range of strain rates', Materials Science and Engineering A, 941, http://dx.doi.org/10.1016/j.msea.2025.148555

Romanova V; Balokhonov R; Zinovieva O; Borodina A; Filippov A; Zinoviev A; Balokhonov V, 2025, 'Multiscale deformation-induced surface pattern in 3D-printed AlSi10Mg under uniaxial compression', Materials Science and Engineering A, 923, http://dx.doi.org/10.1016/j.msea.2024.147684

Zinovieva O; Zinoviev A; Patel MN; Molotnikov A; Easton MA, 2024, 'Modelling grain refinement under additive manufacturing solidification conditions using high performance cellular automata', Materials and Design, 245, pp. 113248, http://dx.doi.org/10.1016/j.matdes.2024.113248

Bayat M; Rothfelder R; Schwarzkopf K; Zinoviev A; Zinovieva O; Spurk C; Hummel M; Olowinsky A; Beckmann F; Moosmann J; Schmidt M; Hattel JH, 2024, 'Exploring spatial beam shaping in laser powder bed fusion: High-fidelity simulation and in-situ monitoring', Additive Manufacturing, 93, http://dx.doi.org/10.1016/j.addma.2024.104420

Bayat M; Zinovieva O; Zinoviev A; Rothfelder R; Scharwzkopf K; Schmidt M; Hattel JH, 2024, 'Understanding the thermo-fluid-microstructural impact of beam shaping in Laser Powder Bed Fusion using high-fidelity multiphysics simulation', Procedia CIRP, 124, pp. 358 - 361, http://dx.doi.org/10.1016/j.procir.2024.08.133

Zinovieva O; Romanova V; Dymnich E; Zinoviev A; Balokhonov R, 2023, 'A Review of Computational Approaches to the Microstructure-Informed Mechanical Modelling of Metals Produced by Powder Bed Fusion Additive Manufacturing', Materials, 16, pp. 6459, http://dx.doi.org/10.3390/ma16196459

Zinovieva O; Romanova V; Zinoviev A; Nekhorosheva O; Balokhonov R, 2023, 'Elastic properties of additively manufactured steel produced with different scan strategies', International Journal of Mechanical Sciences, 244, http://dx.doi.org/10.1016/j.ijmecsci.2022.108089

Zinoviev A; Balokhonov R; Zinovieva O; Romanova V, 2022, 'The influence of material microstructural characteristics on the strength of porous or composite ceramic coatings', International Journal of Solids and Structures, 236-237, http://dx.doi.org/10.1016/j.ijsolstr.2021.111339

Zinoviev A; Balokhonov R; Zinovieva O; Romanova V, 2022, 'Computational parametric study for plastic strain localization and fracture in a polycrystalline material with a porous ceramic coating', Mechanics of Advanced Materials and Structures, 29, pp. 2390 - 2403, http://dx.doi.org/10.1080/15376494.2020.1866124

Romanova V; Balokhonov R; Zinovieva O; Emelianova E; Dymnich E; Pisarev M; Zinoviev A, 2021, 'Micromechanical simulations of additively manufactured aluminum alloys', Computers and Structures, 244, http://dx.doi.org/10.1016/j.compstruc.2020.106412

Dymnich E; Romanova VA; Balokhonov RR; Zinovieva OS; Zinoviev AV, 2021, 'A Numerical Study of the Stress-Strain Behavior of Additively Manufactured Aluminum-Silicon Alloy at the Scale of Dendritic Structure', Physical Mesomechanics, 24, pp. 32 - 39, http://dx.doi.org/10.1134/S1029959921010057

Zinovieva O; Zinoviev A; Romanova V; Balokhonov R, 2020, 'Three-dimensional analysis of grain structure and texture of additively manufactured 316L austenitic stainless steel', Additive Manufacturing, 36, http://dx.doi.org/10.1016/j.addma.2020.101521

Balokhonov RR; Evtushenko EP; Romanova VA; Schwab EA; Bakeev RA; Emelyanova ES; Zinovyeva OS; Zinovyev AV; Sergeev MV, 2020, 'Formation of Bulk Tensile Regions in Metal Matrix Composites and Coatings under Uniaxial and Multiaxial Compression', Physical Mesomechanics, 23, pp. 135 - 146, http://dx.doi.org/10.1134/S1029959920020058

Romanova V; Balokhonov R; Emelianova E; Zinovieva O; Zinoviev A, 2019, 'Microstructure-based simulations of quasistatic deformation using an explicit dynamic approach', Facta Universitatis Series Mechanical Engineering, 17, pp. 243 - 254, http://dx.doi.org/10.22190/FUME190403028R

Emelianova E; Romanova V; Zinovieva O; Balokhonov R; Zinoviev A; Sergeev M, 2019, 'A Micromechanical Model of Additively Manufactured Aluminum Alloys', EPJ Web of Conferences, 221, pp. 01016 - 01016, http://dx.doi.org/10.1051/epjconf/201922101016

Balokhonov R; Bakeev R; Romanova V; Emelianova E; Sergeev M; Zinoviev A; Zinovieva O; Batukhtina E; Schwab E, 2019, 'Computational analysis of deformation and fracture in composite materials and coatings', EPJ Web of Conferences, 221, pp. 01017 - 01017, http://dx.doi.org/10.1051/epjconf/201922101017

Zinovieva O; Zinoviev A; Ploshikhin V; Romanova V; Balokhonov R, 2018, 'Strategy of computational predictions for mechanical behaviour of additively manufactured materials', Materials Science and Technology United Kingdom, 34, pp. 1591 - 1605, http://dx.doi.org/10.1080/02670836.2018.1489939

Zinovieva O; Zinoviev A; Ploshikhin V, 2018, 'Three-dimensional modeling of the microstructure evolution during metal additive manufacturing', Computational Materials Science, 141, pp. 207 - 220, http://dx.doi.org/10.1016/j.commatsci.2017.09.018

Balokhonov RR; Zinovyev AV; Romanova VA; Bakeev RA; Zinovyeva OS, 2016, 'Numerical simulation of deformation and fracture of a material with a polysilazane-based coating', Physical Mesomechanics, 19, pp. 430 - 440, http://dx.doi.org/10.1134/S1029959916040093

Zinoviev A; Zinovieva O; Ploshikhin V; Romanova V; Balokhonov R, 2016, 'Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method', Materials and Design, 106, pp. 321 - 329, http://dx.doi.org/10.1016/j.matdes.2016.05.125

Balokhonov RR; Romanova VA; Martynov SA; Zinoviev AV; Zinovieva OS; Batukhtina EE, 2016, 'A computational study of the microstructural effect on the deformation and fracture of friction stir welded aluminum', Computational Materials Science, 116, pp. 2 - 10, http://dx.doi.org/10.1016/j.commatsci.2015.10.005

Balokhonov R; Romanova V; Batukhtina E; Martynov S; Zinoviev A; Zinovieva O, 2016, 'A mesomechanical analysis of the stress–strain localisation in friction stir welds of polycrystalline aluminium alloys', Meccanica, 51, pp. 319 - 328, http://dx.doi.org/10.1007/s11012-015-0250-9

Balokhonov R; Zinoviev A; Romanova V; Zinovieva O, 2016, 'The computational micromechanics of materials with porous ceramic coatings', Meccanica, 51, pp. 415 - 428, http://dx.doi.org/10.1007/s11012-015-0296-8

Zinovieva O; Zinoviev A; Ploshikhin V; Romanova V; Balokhonov R, 2015, 'A solution to the problem of the mesh anisotropy in cellular automata simulations of grain growth', Computational Materials Science, 108, pp. 168 - 176, http://dx.doi.org/10.1016/j.commatsci.2015.06.026

Zinoviev A; Balokhonov R; Martynov S; Romanova V; Zinovieva O, 2015, 'Numerical simulation of deformation and fracture in a coated material using curvilinear regular meshes', Iop Conference Series Materials Science and Engineering, 71, http://dx.doi.org/10.1088/1757-899X/71/1/012072

Zinovieva O; Zinoviev A; Ploshikhin V; Romanova V; Balokhonov R, 2015, 'Two dimensional cellular automata simulation of grain growth during solidification and recrystallization', Iop Conference Series Materials Science and Engineering, 71, http://dx.doi.org/10.1088/1757-899X/71/1/012073

Salomon V; Zinoviev A; Zinovieva O, 2013, 'BOOK REVIEW: ALESSIO ISHIZAKA AND PHILIPPE NEMERY’S MULTI-CRITERIA DECISION ANALYSIS', International Journal of the Analytic Hierarchy Process, 5, http://dx.doi.org/10.13033/ijahp.v5i2.201

Conference Papers

Lammens N; Gallego-Bordallo F; Ni J; Zinoviev A; de Weer T; Erdelyi H, 2021, 'The role of simulation in the industrialization of Additive Manufacturing', in Procedia Structural Integrity, pp. 247 - 252, http://dx.doi.org/10.1016/j.prostr.2021.12.035

Zinovieva O; Zinoviev A; Romanova V; Balokhonov R, 2020, 'On the importance of three-dimensional analysis of additively manufactured microstructures', in Aip Conference Proceedings, http://dx.doi.org/10.1063/5.0035088

Zinoviev A; Balokhonov R, 2019, 'Effects of the irregular interfacial geometry and elastic properties of ceramic compounds on the strength of steel with a composite coating', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.5132271

Zinovieva O; Zinoviev A, 2019, 'Numerical analysis of the grain morphology and texture in 316L steel produced by selective laser melting', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.5132274

Zinoviev A; Balokhonov R, 2019, 'The influence of the pore size and distribution on the mechanical properties of a brittle ceramic', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.5132272

Balokhonov RR; Romanova VA; Schmauder S; Sergeev MV; Emelianova ES; Zinoviev AV; Zinovieva OS, 2018, 'Microstructure-based numerical analysis of the dynamic deformation of polycrystalline aluminum', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.5083268

Romanova V; Zinovieva O; Balokhonov R; Zinoviev A; Ploshikhin V; Emelianova E; Sergeev M, 2018, 'Modeling of 3D microstructures produced by additive manufacturing', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.5083499

Zinoviev A; Zinovieva O; Ploshikhin V, 2017, 'Computational analysis of grain structure evolution during selective laser melting', in Simulation for Additive Manufacturing 2017 Sinam 2017, pp. 120

Balokhonov RR; Romanova VA; Batukhtina EE; Shakhijanov VS; Martynov SA; Zinoviev AV; Zinovieva OS, 2016, 'Mesomechanical response of microstructure formed on the advancing side of friction stir welded aluminum', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.4967058

Balokhonov RR; Martynov SA; Romanova VA; Panin AV; Kazachenok MS; Batukhtina EE; Shakhijanov VS; Zinoviev AV; Zinovieva OS, 2016, 'Mesoscale plastic strain localization in a titanium alloy with a modified surface layer', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.4967023

Zinoviev A; Zinovieva O; Ploshikhin V; Romanova V; Balokhonov R, 2016, 'On the numerical simulation of the microstructural evolution induced by laser additive manufacturing of steel products', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.4967154

Balokhonov R; Zinoviev A; Romanova V; Martynov S; Zinovieva O, 2016, 'The influence of the mechanical properties of a steel substrate on the macroscopic strength of a coated material', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.4967059

Zinovieva O; Zinoviev A; Ploshikhin V; Romanova V; Balokhonov R, 2016, 'Computational study of the mechanical behavior of steel produced by selective laser melting', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.4966529

Balokhonov RR; Zinoviev AV; Romanova VA; Batukhtina EE, 2015, 'A mesomechanical analysis of the deformation and fracture in polycrystalline materials with ceramic porous coatings', in Aip Conference Proceedings, http://dx.doi.org/10.1063/1.4932710

Balokhonov RR; Martynov SA; Romanova VA; Zinoviev AV, 2014, 'A computational analysis of the interfacial curvature effect on the strength of a material with a modified surface layer', in Aip Conference Proceedings, pp. 43 - 46, http://dx.doi.org/10.1063/1.4898878

Balokhonov RR; Zinoviev AV; Romanova VA; Martynov SA, 2014, 'A numerical simulation of the deformation and fracture of a material with a porous polysilazane coating', in Aip Conference Proceedings, pp. 51 - 54, http://dx.doi.org/10.1063/1.4898880

Balokhonov RR; Schwab EA; Romanova VA; Zinoviev AV; Martynov SA, 2014, 'Mesomechanical numerical modeling of the stress-strain localization and fracture in an aluminum alloy with a composite coating', in Aip Conference Proceedings, pp. 47 - 50, http://dx.doi.org/10.1063/1.4898879

Preprints

Zinovieva O; Romanova V; Zinoviev A; Nekhorosheva O; Balokhonov R, Effective Elastic Properties and the Grain-Scale Mechanical Response of Additively Manufactured 316l Stainless Steel Produced with Different Scanning Strategies, http://dx.doi.org/10.2139/ssrn.4213052

Back to profile page