By Scientia Professor Liangchi Zhang

Journal articles

Duan CZ; Zhang LC; Li H; Wang M, 2011, 'Ductile Fracture due to Adiabatic Shear during the Serrated Chip Formation in High Speed Cutting: A Microscopic Investigation', Key Engineering Materials, 467-469, pp. 181 - 185, http://dx.doi.org/10.4028/www.scientific.net/KEM.467-469.181

Bao R; Zhang LC; Yao Q; Lunn L, 2011, 'Estimating the Peak Indentation Force of the Edge Chipping of Rocks Using Single Point-Attack Pick', Rock Mechanics and Rock Engineering, 44, pp. 339 - 347, http://dx.doi.org/10.1007/s00603-010-0133-2

Zhang LC, 2011, 'Fabrication, Characterisation and Application of Carbon Nanotube Polymer Composites', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 139-141, pp. 1 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.139-141.1

Nguyen T; Zhang LC; Sun D, 2011, 'Heat Transfer in Grinding-Hardening of a Cylindrical Component', Advanced Materials Research, 325, pp. 35 - 41, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.35

Ruan H; Zhang LC, 2011, 'Implementation of glass transition physics in glass molding simulation', Advanced Materials Research, 325, pp. 707 - 712, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.707

Cui D; Mylvaganam K; Zhang LC, 2011, 'Nano-Grooving on Copper by Nano-Milling and Nano-Cutting', Advanced Materials Research, 325, pp. 576 - 581, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.576

Mylvaganam K; Zhang LC, 2011, 'Nanotwinning in monocrystalline silicon upon nanoscratching', Scripta Materialia, 65, pp. 214 - 216, http://dx.doi.org/10.1016/j.scriptamat.2011.04.012

Tang F; Zhang LC, 2011, 'On the reliability of nanoindentation on Si water at elevated temperatures.', Advanced Materials Research, 325, pp. 684 - 689, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.684

Nguyen T; Zhang LC, 2011, 'Realisation of grinding-hardening in workpieces of curved surfaces. Part 1: plunge cylindrical grinding', International Journal of Machine Tools and Manufacture, 51, pp. 309 - 319, http://dx.doi.org/10.1016/j.ijmachtools.2010.12.006

Pramanik A; Zhang LC, 2011, 'Residual stresses in silicon-on-sapphire thin film systems', International Journal of Solids and Structures, 48, pp. 1290 - 1300, http://dx.doi.org/10.1016/j.ijsolstr.2011.01.010

Zhang LC; Xu CS, 2010, 'Study of diesel fuel spray based on avalanche photodiode X-ray imaging technique', Neiranji Gongcheng Chinese Internal Combustion Engine Engineering, 31, pp. 104 - 108

Zhang LC; Guo MZ, 2010, 'The characterization of certain quantum stochastic stationary process', Acta Mathematica Sinica English Series, 26, pp. 1807 - 1814, http://dx.doi.org/10.1007/s10114-010-7651-4

Gao C; Zhang LC, 2010, 'A constitutive model for dynamic plasticity of F.C.C. metals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 527, pp. 3138 - 3143, http://dx.doi.org/10.1016/j.msea.2010.01.083

Zhang C; Zhang LC, 2010, 'A general model of fuzzy plasticity', Chinese Journal of Mechanical Engineering, 23, pp. 496 - 504, http://www.cjmenet.com.cn/xuebaoenglish/papersed/allpapered/newaccepted/fulltext/2009-227.pdf

Wang Y; Zhang LC, 2010, 'A review on the CMP of SiC and sapphire wafers', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 126-128, pp. 429 - 434, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.429

Eyben P; Eyben PE; vanstreels KV; Pourtois G; Clarysse T; Duriau E; Hantschel T; Sankaran K; Mody J; Vandervorst W; Mylvaganam K; Zhang LC, 2010, 'Analysis and modeling of the high vacuum scanning spreading resistance microscopy nanocontact on silicon', Journal of Vacuum Science and Technology B, 28, pp. 401 - 406, http://dx.doi.org/10.1116/1.3273895

Mostafavi SS; Zhang LC; Lunn J, 2010, 'Chipping Brittle Materials: A Finite Element Analysis', Key Engineering Materials, 443, pp. 433 - 438, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.433

Zhang LC; Biddut A; Ali Y, 2010, 'Dependence of pad performance on its texture in polishing mono-crystalline silicon wafers', International Journal of Mechanical Sciences, 52, pp. 657 - 662, http://dx.doi.org/10.1016/j.ijmecsci.2009.09.017

Liu M; Zhang LC; Brawley ; Atanackovic2 P; Duvall S, 2010, 'Determining the Complete Residual Stress Tensors in SOS Heteroepitaxial Thin Film Systems by the Technique of X-Ray Diffraction', Key Engineering Materials, 443, pp. 742 - 747, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.742

Yao Q; Zhang LC; Bao R; Lunn J; Melmeth C, 2010, 'Edge chipping of rock: An experimental study', Key Engineering Materials, 443, pp. 456 - 461, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.456

Pramanik A; Zhang LC; Chen Y, 2010, 'Efficient machining of artificial hip joint components', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 97-101, pp. 2269 - 2272, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.2269

Chen Y; Zhang LC, 2010, 'Fast polishing of single crystal diamond', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 97-101, pp. 4096 - 4099, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.4096

Nguyen T; Zhang LC, 2010, 'Grinding–hardening using dry air and liquid nitrogen: Prediction and verification of temperature fields and hardened layer thickness', International Journal of Machine Tools and Manufacture, 50, pp. 901 - 910, http://dx.doi.org/10.1016/j.ijmachtools.2010.06.002

Tang C; Zhang LC; Mylvaganam K, 2010, 'Mechanical Properties of a silicon nano-wire under uniaxial tension and compression', Journal of Computational and Theoretical Nanoscience, 7, pp. 2135 - 2143, http://dx.doi.org/10.1166/jctn.2010.1596

Uddin MS; Zhang LC, 2010, 'Minimizing stress concentrations in the femoral heads of hip joint prostheses: effect of borehole shapes', Key Engineering Materials, 443, pp. 736 - 741, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.736

Mylvaganam K; Zhang LC, 2010, 'Nano-friction of some carbon allotropes', Journal of Computational and Theoretical Nanoscience, 7, pp. 1 - 4, http://dx.doi.org/10.1166/jctn.2010.1603

Wu Y; Huang H; Zou ; Zhang LC; Dell , 2010, 'Nanoscratch-induced phase transformation of monocrystalline Si', Scripta Materialia, 63, pp. 847 - 850, http://dx.doi.org/10.1016/j.scriptamat.2010.06.034

Wang Y; Zhang LC, 2010, 'On the Chemo-Mechanical Polishing for Nano-Scale Surface Finish of Brittle Wafers', Recent Patents on Nanatechnology, 4, pp. 70 - 77(8), http://dx.doi.org/10.2174/187221010791208812

Mylvaganam K; Zhang LC, 2010, 'Possible chemical bond formation between a carbon nanotube and alumina matrix - a quantum mechanics investigation', Key Engineering Materials, 443, pp. 723 - 728, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.723

Pramanika A; Liu M; Zhang LC, 2010, 'Production, Characterization and Application of Silicon-on-sapphire Wafers', Key Engineering Materials, 443, pp. 567 - 572, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.567

Nguyen T; Zhang LC, 2010, 'Understanding the temperature field in plunge cylindrical grinding for grinding-hardening', Key Engineering Materials, 443, pp. 388 - 393, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.388

Yang JG; Yu HN; Sun SL; Zhang LC; He GQ; Das UN; Ruan H; Shen SR, 2009, 'Epigallocatechin-3-gallate affects the growth of LNCaP cells via membrane fluidity and distribution of cellular zinc', Journal of Zhejiang University Science B, 10, pp. 411 - 421, http://dx.doi.org/10.1631/jzus.B0820400

Zhang LC; Timokhina IB; La Fontaine A; Ringer SP; Hodgson PD; Pereloma EV, 2009, 'Effect of pre-straining and bake hardening on the microstructure and mechanical properties of CMnSi TRIP steels', Metallurgia Italiana, 101, pp. 49 - 55

Chen Y; Zhang LC; Arsecularatne JA, 2009, 'Erratum to "Polishing of polycrystalline diamond by the technique of dynamic friction, Part 2: Material removal mechanism" [Int. J. Mach. Tools Manuf. 47 (10) (2007) 1615-1624] (DOI:10.1016/j.ijmatchtools.2006.11.003)', International Journal of Machine Tools and Manufacture, 49, pp. 433, http://dx.doi.org/10.1016/j.ijmachtools.2009.02.002

Biddut AQ; Zhang LC; Ali YM; Liu Z, 2009, 'Achieving a damage-free polishing of mono-crystalline silicon', Key Engineering Materials, 389-390, pp. 504 - 509

Biddut AQ; Zhang LC; Ali YM, 2009, 'Effect of polishing time and pressure on polishing pad performance', Key Engineering Materials, 389-390, pp. 510 - 514

Chen Y; Zhang LC, 2009, 'On the polishing techniques of diamond and diamond composites', Key Engineering Materials, 404, pp. 85 - 96, http://dx.doi.org/10.4028/www.scientific.net/kem.404.85

Mylvaganam K; Zhang LC, 2009, 'Scale effect of nano-indentation of silicon - A molecular dynamics investigation', Key Engineering Materials, 389-390, pp. 521 - 526

Chang L; Zhang LC, 2009, 'The deformation mechanism at pop-in: Monocrystalline silicon under nanoindentation with a Berkovich indenter', Key Engineering Materials, 389-390, pp. 453 - 458

Zhang LC; Kiat EC; Pramanik A, 2009, 'A briefing on the manufacture of hip joint prostheses', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 76-78, pp. 212 - 216, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.212

Biddut A; Zhang LC; Ali Y; Liu Z, 2009, 'Achieving a Damage-Free Polishing of Mono-Crystalline Silicon', Key Engineering Materials, 389-390, pp. 510 - 514, http://dx.doi.org/10.4028/www.scientific.net/KEM.389-390.510

Huang H; Zhang LC; Wang J; Jiang Z; Zhou L; Xu X; Kuriyagawa T, 2009, 'Advances in Abrasive Technology XII (Editors)', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 76-78, pp. 1 - 730

Li HF; Bao R; Zhang LC, 2009, 'An analytical solution for parameter selection for polishing spherical surfaces', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 76-78, pp. 264 - 269, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.264

Quab Y; Arsecularatne JA; Zhang LC, 2009, 'An investigation of heat dissipation in high speed machining', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 69-70, pp. 480 - 484

Eyben PE; Francesca C; Kris V; Pourtois G; Trudo C; Duriau E; Hantschel T; Sankaran K; Mody J; Wilfried V; Mylvaganam K; Zhang LC, 2009, 'Analysis and modeling of the HV-SSRM nanocontact on silicon', Journal of Vacuum Science and Technology B, 28, pp. 401 - 406, http://dx.doi.org/10.1116/1.3273895

Zhang LC, 2009, 'Cutting composites: a discussion on mechanics modelling', Journal of Materials Processing Technology, 209, pp. 4548 - 4552, http://dx.doi.org/10.1016/j.jmatprotec.2008.10.023

Biddut A; Yan Y; Zhang LC; Ohta T; Kuriyagawa T; Shaun B, 2009, 'Deformation in mono-crystalline silicon caused by high speed single-point micro-cutting', Key Engineering Materials, 407-408, pp. 347 - 350, http://dx.doi.org/10.4028/www.scientific.net/KEM.407-408.347

Chang L; Zhang LC, 2009, 'Deformation mechanisms at pop-out in monocrystalline silicon under nanoindentation', ACTA Materialia, 57, pp. 2148 - 2153, http://dx.doi.org/10.1016/j.actamat.2009.01.008

Mylvaganam K; Zhang LC; Eyben P; Mody J; Vandervorst W, 2009, 'Evolution of the metastable phases in silicon during nanoindentation: Mechanism analysis and experimental verification', Nanotechnology, 20, pp. 1 - 8, http://dx.doi.org/10.1088/0957-4484/20/30/305705

Ali Y; Zhang LC, 2009, 'Fuzzy Rules for Surface Roughness of Ground Steels', Key Engineering Materials, 389-390, pp. 120 - 125, http://dx.doi.org/10.4028/www.scientific.net/KEM.389-390.120

Back to profile page