By Scientia Professor Chun Hui Wang

Journal articles

Wang CH; Rose LRF, 2000, 'Compact solutions for the corner singularity in bonded lap joints', International Journal of Adhesion and Adhesives, 20, pp. 145 - 154, http://dx.doi.org/10.1016/S0143-7496(99)00032-9

Wang CH; Chalkley P, 2000, 'Plastic yielding of a film adhesive under multiaxial stresses', International Journal of Adhesion and Adhesives, 20, pp. 155 - 164, http://dx.doi.org/10.1016/S0143-7496(99)00033-0

Pang F; Hui Wang C, 2000, 'A predictive creep model for un-stitched and stitched woven composites', Composites Science and Technology, 60, pp. 255 - 261, http://dx.doi.org/10.1016/S0266-3538(99)00117-7

Wang X; Xiao K; Ye L; Mai YW; Wang CH; Rose LRF, 2000, 'Modelling mechanical properties of core-shell rubber-modified epoxies', Acta Materialia, 48, pp. 579 - 586, http://dx.doi.org/10.1016/S1359-6454(99)00342-0

Zhang XP; Wang CH; Li JC; Mai YW; Ye L, 2000, 'A combined model of short crack closure accounting for both plasticity and roughness induced crack closures', Key Engineering Materials, pp. 217 - 222

Zhang XP; Wang CH; Li JC; Mai YW; Ye L, 2000, 'Combined model of short crack closure accounting for both plasticity and roughness induced crack closures', Key Engineering Materials, 183

Pang F; Wang CH, 2000, 'Creep rupture failure of woven composites', Journal of Reinforced Plastics and Composites, 19, pp. 1201 - 1216

Wang CH; Hu W; Sawyer JPG, 2000, 'Explicit numerical integration algorithm for a class of non-linear kinematic hardening model', Computational Mechanics, 26, pp. 140 - 147, http://dx.doi.org/10.1007/s004660000161

Wang CH; Erjavec D, 2000, 'Geometrically linear analysis of the thermal stresses in one-sided composite repairs', Journal of Thermal Stresses, 23, pp. 833 - 851, http://dx.doi.org/10.1080/014957300750040104

Knop M; Jones R; Molent L; Wang C, 2000, 'On the Glinka and Neuber methods for calculating notch tip strains under cyclic load spectra', International Journal of Fatigue, 22, pp. 743 - 755, http://dx.doi.org/10.1016/S0142-1123(00)00061-X

Wang CH; Rose LRF, 1999, 'Crack-tip plastic blunting under gross section yielding and implications for modelling physically short cracks', FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 22, pp. 761 - 773, http://dx.doi.org/10.1046/j.1460-2695.1999.t01-1-00209.x

Wang CH; Rose LRF, 1999, 'A crack bridging model for bonded plates subjected to tension and bending', International Journal of Solids and Structures, 36, pp. 1985 - 2014, http://dx.doi.org/10.1016/S0020-7683(98)00070-5

Guo W; Wang CH; Rose LRF, 1999, 'Influence of cross-sectional thickness on fatigue crack growth', Fatigue and Fracture of Engineering Materials and Structures, 22, pp. 437 - 444, http://dx.doi.org/10.1046/j.1460-2695.1999.00176.x

Wang CH; Guo W; Rose LRF, 1999, 'A Method for determining the elastic-plastic response ahead of a notch tip', Journal of Engineering Materials and Technology Transactions of the ASME, 121, pp. 313 - 320, http://dx.doi.org/10.1115/1.2812380

Pang F; Wang CH, 1999, 'Activation theory for creep of woven composites', Composites Part B Engineering, 30, pp. 613 - 620, http://dx.doi.org/10.1016/S1359-8368(99)00025-6

Liu R; Wang CH; Bathgate RG, 1999, 'Crack closure in spherical shells', International Journal of Fracture, 99, pp. 307 - 323, http://dx.doi.org/10.1023/A:1018682914979

Wang CH; Rose LRF, 1999, 'Crack-tip plastic blunting under gross section yielding and implications for modelling physically short cracks', Fatigue and Fracture of Engineering Materials and Structures, 22, pp. 761 - 773, http://dx.doi.org/10.1046/j.1460-2695.1999.t01-1-00209.x

Liu R; Wang CH; Bathgate RG, 1999, 'Fracture analysis of cracked Macadamia nutshells under contact load between two rigid plates', Journal of Agricultural and Engineering Research, 74, pp. 243 - 250, http://dx.doi.org/10.1006/jaer.1999.0455

Callinan RJ; Wang CH, 1999, 'On the fatigue enhancement of interference fitted stop drilled holes', International Journal of Fatigue, 21, pp. 865 - 872, http://dx.doi.org/10.1016/S0142-1123(99)00013-4

Wang ; Rose , 1999, 'Crack-tip plastic blunting under gross section yielding and implications for modelling physically short cracks', Fatigue <html_ent glyph="@amp;" ascii="&amp;"/> Fracture of Engineering Materials and Structures, 22, pp. 761 - 773, http://dx.doi.org/10.1046/j.1460-2695.1999.00209.x

Diewert WE, 1999, 'Introduction and Overview', Canadian Journal of Economics, 33, pp. 3 - 15

Wang CH; Rose LRF; Baker AA, 1998, 'Modelling of the fatigue growth behaviour of patched cracks', International Journal of Fracture, 88, pp. L65 - L70

Wang CH; Chao M, 1998, 'Near-tip deformation of a crack under gross section yielding', International Journal of Fracture, 90, pp. L49 - L54

Wang CH; Rose LRF; Callinan R, 1998, 'Analysis of out-of-plane bending in one-sided bonded repair', International Journal of Solids and Structures, 35, pp. 1653 - 1675, http://dx.doi.org/10.1016/S0020-7683(97)00129-7

Wang CH; Rose LRF, 1998, 'Bonded repair of cracks under mixed mode loading', International Journal of Solids and Structures, 35, pp. 2749 - 2773, http://dx.doi.org/10.1016/S0020-7683(97)00240-0

Wang CH, 1998, 'On the fracture of constrained layers', International Journal of Fracture, 93, pp. 227 - 246, http://dx.doi.org/10.1007/978-94-017-2854-6_12

Peng Z; Wang C; Li C; Gao Q; Wang Z; Zhang G; Zhang J; Li X; Peng J, 1998, 'Simultaneous determination of creatinine, pseudouridine and uric acid in serum and urine by high performance liquid chromatography', Se Pu Chinese Journal of Chromatography Zhongguo Hua Xue Hui, 16, pp. 146 - 148

Wang CH; Heller M; Rose LRF, 1998, 'Substrate stress concentrations in bonded lap joints', Journal of Strain Analysis for Engineering Design, 33, pp. 331 - 346, http://dx.doi.org/10.1243/0309324981513039

Wang CH; Rose LRF, 1998, 'Transient and steady-state deformation at notch root under cyclic loading', Mechanics of Materials, 30, pp. 229 - 241, http://dx.doi.org/10.1016/S0167-6636(98)00048-9

Wang CH, 1997, 'Analysis of cracks in constrained layers', International Journal of Fracture, 83, pp. 1 - 7

Pang F; Wang CH; Bathgate RG, 1997, 'Creep response of woven-fibre composites and the effect of stitching', Composites Science and Technology, 57, pp. 91 - 98, http://dx.doi.org/10.1016/S0266-3538(96)00112-1

Wang CH; Rose LRF, 1997, 'Determination of triaxial stresses in bonded joints', International Journal of Adhesion and Adhesives, 17, pp. 17 - 25, http://dx.doi.org/10.1016/S0143-7496(96)00028-0

Bathgate RG; Wang CH; Pang F, 1997, 'Effects of temperature on the creep behaviour of woven and stitched composites', Composite Structures, 38, pp. 435 - 445, http://dx.doi.org/10.1016/S0263-8223(97)00078-0

Wang CH, 1997, 'Fracture of interface cracks under combined loading', Engineering Fracture Mechanics, 56, pp. 77 - 86, http://dx.doi.org/10.1016/s0013-7944(96)00111-7

Brown MW; Suker DK; Wang CH, 1996, 'An analysis of mean stress in multiaxial random fatigue', Fatigue and Fracture of Engineering Materials and Structures, 19, pp. 323 - 333, http://dx.doi.org/10.1111/j.1460-2695.1996.tb00970.x

Wang CH, 1996, 'Effect of stress ratio on short fatigue crack growth', Journal of Engineering Materials and Technology Transactions of the ASME, 118, pp. 362 - 366, http://dx.doi.org/10.1115/1.2806819

Wang CH; Brown MW, 1996, 'Life prediction techniques for variable amplitude multiaxial fatigue—Part 1: Theories', Journal of Engineering Materials and Technology Transactions of the ASME, 118, pp. 367 - 370, http://dx.doi.org/10.1115/1.2806821

Wang CH; Brown MW, 1996, 'Life prediction techniques for variable amplitude multiaxial fatigue—Part 2: Comparison with experimental results', Journal of Engineering Materials and Technology Transactions of the ASME, 118, pp. 371 - 374, http://dx.doi.org/10.1115/1.2806822

Wang CH; Brown MW, 1996, 'On plastic deformation and fatigue under multiaxial loading', Nuclear Engineering and Design, 162, pp. 75 - 84, http://dx.doi.org/10.1016/0029-5493(95)01134-X

Wang CH, 1996, 'Viscoelasticity of engineering materials', NDT & E International, 29, pp. 241 - 241, http://dx.doi.org/10.1016/s0963-8695(96)00025-4

Wang C-H; Zhang L; Mai Y-W, 1995, 'Deformation and fracture of Macadamia nuts', International Journal of Fracture, 69, pp. 51 - 65, http://dx.doi.org/10.1007/bf00032188

Wang CH; Brown MW, 1994, 'Modelling of the deformation behaviour of flake graphite iron under multi-axial cyclic loading', Journal of Strain Analysis for Engineering Design, 29, pp. 277 - 288, http://dx.doi.org/10.1243/03093247V294277

Wang CH; Zhang L; Mai YW, 1994, 'Deformation and fracture of Macadamia nuts - Part 1: Deformation analysis of nut-in-shell', International Journal of Fracture, 69, pp. 51 - 65, http://dx.doi.org/10.1007/BF00032188

Wang CH; Mai YW, 1994, 'Deformation and fracture of Macadamia nuts - Part 2: Microstructure and fracture mechanics analysis of nutshell', International Journal of Fracture, 69, pp. 67 - 85, http://dx.doi.org/10.1007/BF00032189

WANG CH; BROWN MW, 1994, 'A STUDY OF THE DEFORMATION-BEHAVIOR UNDER MULTIAXIAL LOADING', EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 13, pp. 175 - 188, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1994NJ65400002&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Wang CH; Brown MW, 1993, 'A PATH‐INDEPENDENT PARAMETER FOR FATIGUE UNDER PROPORTIONAL AND NON‐PROPORTIONAL LOADING', Fatigue Fracture of Engineering Materials Structures, 16, pp. 1285 - 1297, http://dx.doi.org/10.1111/j.1460-2695.1993.tb00739.x

Wang CH; Miller KJ, 1993, 'SHORT FATIGUE CRACK GROWTH UNDER MEAN STRESS, UNIAXIAL LOADING', Fatigue Fracture of Engineering Materials Structures, 16, pp. 181 - 198, http://dx.doi.org/10.1111/j.1460-2695.1993.tb00752.x

WANG CH; MILLER KJ, 1993, 'THE EFFECT OF MEAN SHEAR-STRESS ON TORSIONAL FATIGUE BEHAVIOR (VOL 14, PG 293, 1991)', FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 16, pp. 1397 - 1398, http://dx.doi.org/10.1111/j.1460-2695.1993.tb00747.x

Wang CH; Miller KJ, 1992, 'THE EFFECTS OF MEAN AND ALTERNATING SHEAR STRESSES ON SHORT FATIGUE CRACK GROWTH RATES', Fatigue Fracture of Engineering Materials Structures, 15, pp. 1223 - 1236, http://dx.doi.org/10.1111/j.1460-2695.1992.tb01259.x

Wang CH; Miller KJ, 1991, 'THE EFFECT OF MEAN SHEAR STRESS ON TORSIONAL FATIGUE BEHAVIOUR', Fatigue Fracture of Engineering Materials Structures, 14, pp. 293 - 307, http://dx.doi.org/10.1111/j.1460-2695.1991.tb00659.x

Back to profile page