By Professor Zhongxiao Peng

Journal articles

Peng Z; Fasiolo M; Hart K, 2009, 'Investigation into changes in collagen structure of articular cartilage and wear particles of knee joints for osteoarthritic wear assessment', Journal of Musculoskeletal Research, 12, pp. 143 - 152, http://dx.doi.org/10.1142/S0218957709002316

Kushan MC; Peng Z; Peng S, 2009, 'A new approach of failure warning and monitoring control system of auxiliary power unit', SAE Technical Papers, http://dx.doi.org/10.4271/2009-01-3227

Scardino AJ; Hudleston D; Peng Z; Paul NA; De Nys R, 2009, 'Biomimetic characterisation of key surface parameters for the development of fouling resistant materials', Biofouling, 25, pp. 83 - 93, http://dx.doi.org/10.1080/08927010802538480

Yuan CQ; Peng Z; Yan XP; Zhou XC, 2008, 'Surface roughness evolutions in sliding wear process', Wear, 265, pp. 341 - 348, http://dx.doi.org/10.1016/j.wear.2007.11.002

Ebersbach S; Peng Z, 2008, 'Expert system development for vibration analysis in machine condition monitoring', Expert Systems with Applications, 34, pp. 291 - 299, http://dx.doi.org/10.1016/j.eswa.2006.09.029

Peng Z; Tomovich S, 2008, 'The development of a new image acquisition & analysis system for 3D surface measurements using confocal laser scanning microscopy', Advanced Materials Research, 32, pp. 173 - 179, http://dx.doi.org/10.4028/0-87849-475-8.173

Louden D; Inderbitzin S; Peng Z; de Nys R, 2007, 'Development of a new protocol for testing bath sponge quality', Aquaculture, 271, pp. 275 - 285, http://dx.doi.org/10.1016/j.aquaculture.2007.06.010

Yuan CQ; Yan XP; Peng Z, 2007, 'Prediction of surface features of wear components based on surface characteristics of wear debris', Wear, 263, pp. 1513 - 1517, http://dx.doi.org/10.1016/j.wear.2006.11.029

Zhou S; Ling W; Peng Z, 2007, 'An RFID-based remote monitoring system for enterprise internal production management', International Journal of Advanced Manufacturing Technology, 33, pp. 837 - 844, http://dx.doi.org/10.1007/s00170-006-0506-6

Yuan CQ; Yan XP; Peng ZX, 2007, 'Three-dimensional surface characterization of wear debris', Mocaxue Xuebao Tribology, 27, pp. 294 - 296

Peng Z, 2007, 'Osteoarthritis diagnosis using wear particle analysis technique: Investigation of correlation between particle and cartilage surface in walking process', Wear, 262, pp. 630 - 640, http://dx.doi.org/10.1016/j.wear.2006.07.011

Yuan C; Yan X; Peng Z, 2006, 'Numerical characterization of 3D worn surface topography using confocal laser scanning microscopy', Run Hua Yu Mi Feng Lubrication Engineering, pp. 33 - 36

Wu JP; Kirk TB; Peng Z; Miller K; Zheng MH, 2006, 'Quantitative characterization of collagen orientation in the superficial zone for studying early degenerative changes in articular cartilage', Journal of Musculoskeletal Research, 10, pp. 1 - 12, http://dx.doi.org/10.1142/S0218957706001674

Li Q; Loughran J; Peng Z; Osborne J, 2006, 'A fracture based model for wear debris formation', Key Engineering Materials, 324-325 II, pp. 1157 - 1160, http://dx.doi.org/10.4028/0-87849-413-8.1157

Wu JP; Kirk TB; Peng Z; Miller K; Zheng MH, 2005, 'Utilization of two-dimensional fast fourier transform and power spectral analysis for assessment of early degeneration of articular cartilage', Journal of Musculoskeletal Research, 9, pp. 119 - 131, http://dx.doi.org/10.1142/S0218957705001564

Yuan CQ; Yan XP; Peng ZX, 2005, 'Study on the acquisition of 3D surface topography of wear debris', Wuhan Ligong Daxue Xuebao Journal of Wuhan University of Technology, 27, pp. 88 - 90

Yuan CQ; Peng Z; Zhou XC; Yan XP, 2005, 'The surface roughness evolutions of wear particles and wear components under lubricated rolling wear condition', Wear, 259, pp. 512 - 518, http://dx.doi.org/10.1016/j.wear.2004.11.011

Zhou S; Peng Z; Yarlagadda PKDV, 2005, 'A complete solution for neutral knowledge representation within collaborative product development environment', International Journal of Advanced Manufacturing Technology, 25, pp. 761 - 771, http://dx.doi.org/10.1007/s00170-003-1910-9

Yuan C; Peng Z; Yan X, 2005, 'Surface characterization using wavelet theory and confocal laser scanning microscopy', Journal of Tribology, 127, pp. 394 - 404, http://dx.doi.org/10.1115/1.1866161

Yuan CQ; Peng Z; Zhou XC; Yan XP, 2005, 'The characterization of wear transitions in sliding wear process contaminated with silica and iron powder', Tribology International, 38, pp. 129 - 143, http://dx.doi.org/10.1016/j.triboint.2004.06.007

Tomovich SJ; Peng Z, 2005, 'Optimised reflection imaging for surface roughness analysis using confocal laser scanning microscopy and height encoded image processing', Journal of Physics Conference Series, 13, pp. 426 - 429, http://dx.doi.org/10.1088/1742-6596/13/1/098

Yuan CQ; Peng Z; Zhou XC; Yan XP, 2004, 'Effects of temperature on sliding wear process under contaminated lubricant test conditions', Wear, 257, pp. 812 - 822, http://dx.doi.org/10.1016/j.wear.2004.05.014

Zhou SQ; Zhao AP; Chin KS; Yarlagadda PKDV; Peng Z, 2004, 'A solution for knowledge resources provider over the Internet', International Journal of Advanced Manufacturing Technology, 24, pp. 148 - 160

Kessissoglou NJ; Peng Z, 2003, 'Integrating Vibration and Oil Analysis for Machine Condition Monitoring', Practicing Oil Analysis, pp. 84, 86 - 91, https://www.machinerylubrication.com/Read/460/integrating-vibration-oil-analysis

Peng Z; Kessissoglou N, 2003, 'An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis', Wear, 255, pp. 1221 - 1232, http://dx.doi.org/10.1016/S0043-1648(03)00098-X

Yuan CQ; Li J; Yan XP; Peng Z, 2003, 'The use of the fractal description to characterize engineering surfaces and wear particles', Wear, 255, pp. 315 - 326, http://dx.doi.org/10.1016/S0043-1648(03)00206-0

Peng Z, 2002, 'An integrated intelligence system for wear debris analysis', Wear, 252, pp. 730 - 743, http://dx.doi.org/10.1016/S0043-1648(02)00031-5

Peng Z; Goodwin S, 2001, 'Wear-debris analysis in expert systems', Tribology Letters, 11, pp. 177 - 184, http://dx.doi.org/10.1023/A:1012593802435

Peng Z; Kirk TB, 1999, 'The study of three-dimensional analysis techniques and automatic classification systems for wear particles', Journal of Tribology, 121, pp. 169 - 176, http://dx.doi.org/10.1115/1.2833799

Peng Z; Kirk TB, 1999, 'Wear particle classification in a fuzzy grey system', Wear, 225-229, pp. 1238 - 1247, http://dx.doi.org/10.1016/S0043-1648(98)00400-1

Peng Z; Kirk TB, 1998, 'Computer image analysis of wear particles in three-dimensions for machine condition monitoring', Wear, 223, pp. 157 - 166, http://dx.doi.org/10.1016/S0043-1648(98)00280-4

Grigoriev AY; Peng Z; Kirk TB, 1998, 'Wear debris classification by surface texture using co-occurrence matrices', Journal of Friction and Wear, 19, pp. 42 - 50

Peng Z; Kirk TB, 1998, 'Automatic wear-particle classification using neural networks', Tribology Letters, 5, pp. 249 - 257, http://dx.doi.org/10.1023/A:1019126732337

Grigor'ev AY; Peng Z; Kirk TB, 1998, 'Classification of wear debris on texture using matrices of co-occurrence', Dianyuan Jishu Chinese Journal of Power Sources, 22, pp. 606 - 615

Peng Z; Kirk TB; Xu ZL, 1997, 'The development of three-dimensional imaging techniques of wear particle analysis', Wear, 203-204, pp. 418 - 424, http://dx.doi.org/10.1016/S0043-1648(96)07371-1

Peng Z; Kirk TB, 1997, 'Two-dimensional fast Fourier transform and power spectrum for wear particle analysis', Tribology International, 30, pp. 583 - 590, http://dx.doi.org/10.1016/S0301-679X(97)00026-1

Back to profile page