By Professor Yansong Shen

Journal articles

Liu Y; Shen Y, 2019, 'Three-dimensional modelling of charcoal combustion in an industrial scale blast furnace', Fuel, 258, http://dx.doi.org/10.1016/j.fuel.2019.116088

Li CX; Dong KJ; Shen YS; Yu AB, 2019, 'Particle conveying under microgravity in a vibrating vessel', Advanced Powder Technology, 30, pp. 3163 - 3170, http://dx.doi.org/10.1016/j.apt.2019.09.025

Yu X; Shen Y, 2019, 'Computational Fluid Dynamics Study of the Flow and Thermochemical Behaviors of a Carbon Composite Briquette in an Ironmaking Blast Furnace', Energy and Fuels, 33, pp. 11603 - 11616, http://dx.doi.org/10.1021/acs.energyfuels.9b02954

Yu X; Shen Y, 2019, 'Model Study of Blast Furnace Operation with Central Coke Charging', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 50, pp. 2238 - 2250, http://dx.doi.org/10.1007/s11663-019-01657-2

Yue Y; Wang T; Sakai M; Shen Y, 2019, 'Particle-scale study of spout deflection in a flat-bottomed spout fluidized bed', Chemical Engineering Science, 205, pp. 121 - 133, http://dx.doi.org/10.1016/j.ces.2019.04.031

Zhuo Y; Li C; Wu C; Shen Y, 2019, 'A combined numerical and experimental approach to study the carbonization of low-rank coal ellipsoidal briquettes', Chemical Engineering Science, 204, pp. 76 - 90, http://dx.doi.org/10.1016/j.ces.2019.04.019

Liu Y; Shen Y, 2019, 'CFD study of charcoal combustion in a simulated ironmaking blast furnace', Fuel Processing Technology, 191, pp. 152 - 167, http://dx.doi.org/10.1016/j.fuproc.2019.04.004

Hasan MT; Li C; Shen Y; Yu A; Yang R, 2019, 'Finite element analysis of briquetting of iron ore fines', Powder Technology, 353, pp. 398 - 408, http://dx.doi.org/10.1016/j.powtec.2019.05.026

Cui J; Shen Y; Liu X, 2019, 'Experimental investigation and thermodynamic modeling of the Fe−Si−Zr system', Calphad Computer Coupling of Phase Diagrams and Thermochemistry, 65, pp. 385 - 401, http://dx.doi.org/10.1016/j.calphad.2019.04.001

Yu X; Shen Y, 2019, 'Model analysis of gas residence time in an ironmaking blast furnace', Chemical Engineering Science, 199, pp. 50 - 63, http://dx.doi.org/10.1016/j.ces.2018.12.062

Chen X; Shen Y; Zhong X; Li T; Zhao S; Zhou P; Han C; Wei D; Shen Y, 2019, 'Synthesis of ZnO nanowires/Au nanoparticles hybrid by a facile one-pot method and their enhanced NO2 sensing properties', Journal of Alloys and Compounds, 783, pp. 503 - 512, http://dx.doi.org/10.1016/j.jallcom.2019.01.001

Xie Z; An X; Yang X; Li C; Shen Y, 2019, 'Numerical realization and structure characterization on random close packings of cuboid particles with different aspect ratios', Powder Technology, 344, pp. 514 - 524, http://dx.doi.org/10.1016/j.powtec.2018.12.017

Zhou H; Wu S; Kou M; Yao S; Shen Y, 2018, 'Analysis of coke oven gas injection from dome in COREX melter gasifier for adjusting dome temperature', Metals, 8, http://dx.doi.org/10.3390/met8110921

Yu X; Shen Y, 2018, 'Modelling of Blast Furnace with Respective Chemical Reactions in Coke and Ore Burden Layers', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 49, pp. 2370 - 2388, http://dx.doi.org/10.1007/s11663-018-1332-6

Ratnayake P; Chandratilleke R; Bao J; Shen Y, 2018, 'A soft-sensor approach to mixing rate determination in powder mixers', Powder Technology, 336, pp. 493 - 505, http://dx.doi.org/10.1016/j.powtec.2018.06.022

Sun K; Liu F; Huang J; Yan C; Song N; Sun H; Xue C; Zhang Y; Pu A; Shen Y; Stride JA; Green M; Hao X, 2018, 'Flexible kesterite Cu2ZnSnS4 solar cells with sodium-doped molybdenum back contacts on stainless steel substrates', Solar Energy Materials and Solar Cells, 182, pp. 14 - 20, http://dx.doi.org/10.1016/j.solmat.2018.02.036

Liu Y; Shen Y, 2018, 'Computational Fluid Dynamics Study of Biomass Combustion in a Simulated Ironmaking Blast Furnace: Effect of the Particle Shape', Energy and Fuels, 32, pp. 4372 - 4381, http://dx.doi.org/10.1021/acs.energyfuels.7b03150

Zhuo Y; Wang T; Li C; Shen Y, 2018, 'Numerical Study of the Pyrolysis of Ellipsoidal Low-Rank Coal Briquettes', Energy and Fuels, 32, pp. 4189 - 4201, http://dx.doi.org/10.1021/acs.energyfuels.7b03224

Li T; Shen Y; Zhao S; Chen X; Li G; Lu R; Zhu L; Li H; Wei D; Shen Y, 2018, 'Xanthate sensing properties of Pt-functionalized WO3 microspheres synthesized by one-pot hydrothermal method', Ceramics International, 44, pp. 4814 - 4823, http://dx.doi.org/10.1016/j.ceramint.2017.12.069

Chen X; Shen Y; Zhang W; Zhang J; Wei D; Lu R; Zhu L; Li H; Shen Y, 2018, 'In-situ growth of ZnO nanowire arrays on the sensing electrode via a facile hydrothermal route for high-performance NO 2 sensor', Applied Surface Science, 435, pp. 1096 - 1104, http://dx.doi.org/10.1016/j.apsusc.2017.11.222

He Y; Evans TJ; Shen YS; Yu AB; Yang RY, 2018, 'Discrete modelling of the compaction of non-spherical particles using a multi-sphere approach', Minerals Engineering, 117, pp. 108 - 116, http://dx.doi.org/10.1016/j.mineng.2017.12.013

Chandratilleke GR; Dong KJ; Shen YS, 2018, 'DEM study of the effect of blade-support spokes on mixing performance in a ribbon mixer', Powder Technology, 326, pp. 123 - 136, http://dx.doi.org/10.1016/j.powtec.2017.12.055

Wu YL; Jiang ZY; Zhang XX; Xue QG; Miao Z; Zhou Z; Shen YS, 2018, 'Process optimization of metallurgical dust recycling by direct reduction in rotary hearth furnace', Powder Technology, 326, pp. 101 - 113, http://dx.doi.org/10.1016/j.powtec.2017.12.063

Zhou H; Wu S; Kou M; Luo ZG; Zou ZS; Shen Y, 2018, 'Analysis of cohesive particle percolation in a packed bed using discrete element method', ISIJ International, 58, pp. 43 - 51, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-373

Zhou H; Wu S; Kou M; Lu Z-G; Zou Z-S; Shen Y, 2018, 'Analysis of Cohesive Particle Percolation in a Packed Bed Using Discrete Element Method', ISIJ INTERNATIONAL, 58, pp. 43 - 51, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-373

Zhou H; Wu S; Kou M; Luo Z; He W; Zou Z; Shen Y, 2018, 'Discrete particle simulation of solid flow in a large-scale reduction shaft furnace with center gas supply device', ISIJ International, 58, pp. 422 - 430, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-545

Zhao S; Shen Y; Zhou P; Zhang J; Zhang W; Chen X; Wei D; Fang P; Shen Y, 2018, 'Highly selective NO2 sensor based on p-type nanocrystalline NiO thin films prepared by sol–gel dip coating', Ceramics International, 44, pp. 753 - 759, http://dx.doi.org/10.1016/j.ceramint.2017.09.243

Gao Q; Shen Y; Wei G; Shen F, 2018, 'Reduction kinetics behavior of FeO-CaO-SiO2-MgO-Al2O3 molten slag using solid-carbon', Archives of Metallurgy and Materials, 63, pp. 257 - 263, http://dx.doi.org/10.24425/118936

Meng F; Gupta S; Yu J; Jiang Y; Koshy P; Sorrell C; Shen Y, 2017, 'Effects of kaolinite addition on the thermoplastic behaviour of coking coal during low temperature pyrolysis', Fuel Processing Technology, 167, pp. 502 - 510, http://dx.doi.org/10.1016/j.fuproc.2017.08.005

Gao QJ; Wei G; Shen YS; Jiang X; Zheng HY; Shen FM; Liu CS, 2017, 'Influence and mechanism of Indonesia vanadium titano-magnetite on metallurgical properties of iron ore sinter', Journal of Central South University, 24, pp. 2805 - 2812, http://dx.doi.org/10.1007/s11771-017-3695-2

Zhou H; Wu S; Kou M; Tang B; Cheng H; Zhang Y; Shen Y, 2017, 'Solid Flow in a Shaft Furnace in Smelting Reduction Process under Circumferential Imbalance Conditions', Steel Research International, 88, http://dx.doi.org/10.1002/srin.201700212

Meng F; Gupta S; French D; Koshy P; Sorrell C; Shen Y, 2017, 'Characterization of microstructure and strength of coke particles and their dependence on coal properties', Powder Technology, 320, pp. 249 - 256, http://dx.doi.org/10.1016/j.powtec.2017.07.046

Liu Y; Zhang J; Xing X; Liu Z; Li X; Li N; Shen Y, 2017, 'Synthesis and non-isothermal carbothermic reduction of FeTiO3-Fe2O3 solid solution systems', Metallurgical and Materials Transactions B

Liu F; Huang J; Sun K; Yan C; Shen Y; Park J; Pu A; Zhou F; Liu X; Stride JA; Green MA; Hao X, 2017, 'Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact', NPG Asia Mater, 9, pp. e401, http://dx.doi.org/10.1038/am.2017.103

Wu YL; Jiang Z; Zhang X; Xue Q; Yu A; Shen Y, 2017, 'Modelling of Thermochemical Behaviour in An Industrial-Scale Rotary Hearth Furnace for Metallurgical Dust Recycling', Metallurgical and Materials Transactions B

Miao Z; Zhou Z; Yu AB; Shen Y, 2017, 'CFD-DEM simulation of raceway formation in an ironmaking blast furnace', Powder Technology, 314, pp. 542 - 549, http://dx.doi.org/10.1016/j.powtec.2016.11.039

Xu J; Yu S; Wang N; Chen M; Shen Y, 2017, 'Characterization of high-turbulence zone in slowly moving bed slagging coal gasifier by a 3D mathematical model', Powder Technology, 314, pp. 524 - 531, http://dx.doi.org/10.1016/j.powtec.2016.10.022

Luo ZG; Zhou H; Zhang T; You Y; Zhang LJ; Zou ZS; Shen YS, 2017, 'DEM study of blockage behaviour of cohesive fine particles in a packed structure of large particles', Powder Technology, 314, pp. 102 - 109, http://dx.doi.org/10.1016/j.powtec.2016.08.053

Liao J; Yu AB; Shen Y, 2017, 'Modelling the injection of upgraded brown coals in an ironmaking blast furnace', Powder Technology, 314, pp. 550 - 556, http://dx.doi.org/10.1016/j.powtec.2016.11.005

GAO QJ; SHEN YS; JIANG X; ZHENG HY; SHEN FM; LIU CS, 2016, 'Effect of MgO on Oxidation Process of Fe3O4 in Pellets', Journal of Iron and Steel Research International, 23, pp. 1007 - 1011, http://dx.doi.org/10.1016/S1006-706X(16)30151-0

Gao QJ; Shen YS; Wei G; Jiang X; Shen FM, 2016, 'Diffusion behavior and distribution regulation of MgO in MgO-bearing pellets', International Journal of Minerals Metallurgy and Materials, 23, pp. 1011 - 1018, http://dx.doi.org/10.1007/s12613-016-1318-9

Shen YS; Yu AB, 2016, 'Modelling of injecting a ternary coal blend into a model ironmaking blast furnace', Minerals Engineering, 90, pp. 89 - 95, http://dx.doi.org/10.1016/j.mineng.2015.12.009

Shen Y; Guo B; Chew S; Austin P; Yu A, 2016, 'Modeling of Internal State and Performance of an Ironmaking Blast Furnace: Slot vs Sector Geometries', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 47, pp. 1052 - 1062, http://dx.doi.org/10.1007/s11663-015-0557-x

Zhou H; Luo ZG; Zhang T; You Y; Zou ZS; Shen Y, 2016, 'DEM study of solid flow in COREX shaft furnace with Areal Gas Distribution beams', ISIJ International, 56, pp. 245 - 254, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2015-540

Sun K; Liu F; Yan C; Zhou F; Huang J; Shen Y; Liu R; Hao X, 2016, 'Influence of sodium incorporation on kesterite Cu2ZnSnS4 solar cells fabricated on stainless steel substrates', Solar Energy Materials and Solar Cells, 157, pp. 565 - 571, http://dx.doi.org/10.1016/j.solmat.2016.07.036

Shen Y; Wang W; Fan A; Wei D; Liu W; Han C; Shen Y; Meng D; San X, 2015, 'Highly sensitive hydrogen sensors based on SnO2 nanomaterials with different morphologies', International Journal of Hydrogen Energy, 40, pp. 15773 - 15779, http://dx.doi.org/10.1016/j.ijhydene.2015.09.077

Sun Y; Zheng H; Dong Y; Jiang X; Shen Y; Shen F, 2015, 'Melting and separation behavior of slag and metal phases in metallized pellets obtained from the direct-reduction process of vanadium-bearing titanomagnetite', International Journal of Mineral Processing, 142, pp. 119 - 124, http://dx.doi.org/10.1016/j.minpro.2015.04.002

Shen Y; Yu A, 2015, 'Characterization of Coal Burnout in the Raceway of an Ironmaking Blast Furnace', Steel Research International, 86, pp. 604 - 611, http://dx.doi.org/10.1002/srin.201400333

Shen F; Gao Q; Wei G; Jiang X; Shen Y, 2015, 'Densification Process of MgO Bearing Pellets', Steel Research International, 86, pp. 644 - 650, http://dx.doi.org/10.1002/srin.201400372

Yu A; Shen Y, 2015, 'Iron and Steel Making in Australia and China - Special Issue for the 2nd Australia-China Joint Symposium of Minerals and Metallurgy', Steel Research International, 86, pp. 591, http://dx.doi.org/10.1002/srin.201500139

Back to profile page