By Professor Gangadhara Prusty

Journal articles

Banerjee A; Wang H; Brown A; Ameri A; Zhu Q; Bhattacharyya S; Hazell PJ; Prusty BG, 2020, 'Experimental investigation on the dynamic flow behaviour and structure-property correlation of dual-phase high carbon steel at elevated temperatures', Materials Science and Engineering A, 771, http://dx.doi.org/10.1016/j.msea.2019.138655

Jojibabu P; Zhang YX; Prusty BG, 2020, 'A review of research advances in epoxy-based nanocomposites as adhesive materials', International Journal of Adhesion and Adhesives, 96, http://dx.doi.org/10.1016/j.ijadhadh.2019.102454

Rajan G; Raju R; Jinachandran S; Farrar P; Xi J; Prusty BG, 2019, 'Polymerisation Shrinkage Profiling of Dental Composites using Optical Fibre Sensing and their Correlation with Degree of Conversion and Curing Rate', Scientific Reports, 9, pp. 3162, http://dx.doi.org/10.1038/s41598-019-40162-z

Cho K; Wang G; Raju ; Fang J; Rajan G; Stenzel MH; Farrar P; Prusty BG, 2019, 'Selective Atomic-Level Etching on Short S-Glass Fibres to Control Interfacial Properties for Restorative Dental Composites', Scientific Reports, 9, pp. 3851, http://dx.doi.org/10.1038/s41598-019-40524-7

Jojibabu P; Zhang YX; Rider AN; Wang J; Gangadhara Prusty B, 2019, 'Synergetic effects of carbon nanotubes and triblock copolymer on the lap shear strength of epoxy adhesive joints', Composites Part B Engineering, 178, http://dx.doi.org/10.1016/j.compositesb.2019.107457

Ryzińska G; David M; Prusty G; Tarasiuk J; Wroński S, 2019, 'Effect of fibre architecture on the specific energy absorption in carbon epoxy composite tubes under progressive crushing', Composite Structures, 227, http://dx.doi.org/10.1016/j.compstruct.2019.111292

Oromiehie E; Prusty BG; Compston P; Rajan G, 2019, 'Automated fibre placement based composite structures: Review on the defects, impacts and inspections techniques', Composite Structures, 224, http://dx.doi.org/10.1016/j.compstruct.2019.110987

Cho K; Wang G; Raju R; Rajan G; Fang J; Stenzel MH; Farrar P; Gangadhara Prusty B; Prusty G, 2019, 'Influence of Surface Treatment on the Interfacial and Mechanical Properties of Short S-Glass Fiber-Reinforced Dental Composites', ACS Applied Materials and Interfaces, 11, pp. 32328 - 32338, http://dx.doi.org/10.1021/acsami.9b01857

Armitage L; Rajan G; Kark L; Simmons A; Prusty BG, 2019, 'Simultaneous measurement of normal and shear stress using fiber bragg grating sensors in prosthetic applications', IEEE Sensors Journal, 19, pp. 7383 - 7390, http://dx.doi.org/10.1109/JSEN.2019.2914702

Banerjee A; Gangadhara Prusty B; Zhu Q; Pahlevani F; Sahajwalla V; Prusty G, 2019, 'Strain-Rate-Dependent Deformation Behavior of High-Carbon Steel under Tensile–Compressive Loading', JOM, 71, pp. 2757 - 2769, http://dx.doi.org/10.1007/s11837-019-03594-6

Jinachandran S; Basu A; Li H; Xi J; Prusty BG; Rajan G, 2019, 'The Study of the Directional Sensitivity of Fiber Bragg Gratings for Acoustic Emission Measurements', IEEE Sensors Journal, 19, pp. 6771 - 6777, http://dx.doi.org/10.1109/JSEN.2019.2913415

Budarapu PR; Kumar S; Prusty BG; Paggi M, 2019, 'Stress transfer through the interphase in curved-fiber pullout tests of nanocomposites', Composites Part B Engineering, 165, pp. 417 - 434, http://dx.doi.org/10.1016/j.compositesb.2018.12.116

Shaheen W; Kanapathipillai K; Mathew P; Prusty G, 2019, 'Optimization of compound die punches and double cutting process parameters using finite element analysis', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, http://dx.doi.org/10.1177/0954405419855507

Banerjee A; Hossain R; Pahlevani F; Zhu Q; Sahajwalla V; Prusty BG, 2019, 'Strain-rate-dependent deformation behaviour of high-carbon steel in compression: mechanical and structural characterisation', Journal of Materials Science, 54, pp. 6594 - 6607, http://dx.doi.org/10.1007/s10853-018-03301-x

Banerjee A; Prusty BG, 2019, 'Corrigendum to “Fatigue and fracture behaviour of austenitic-martensitic high carbon steel under high cycle fatigue: An experimental investigation” [Mater. Sci. Eng.: A 749 (11) (March 2019) 79–88](S0921509319301704)(10.1016/j.msea.2019.02.010)', Materials Science and Engineering A, 754, pp. 812, http://dx.doi.org/10.1016/j.msea.2019.03.117

Patole SP; Reddy SK; Schiffer A; Askar K; Prusty BG; Kumar S, 2019, 'Piezoresistive and Mechanical Characteristics of Graphene Foam Nanocomposites', ACS Applied Nano Materials, 2, pp. 1402 - 1411, http://dx.doi.org/10.1021/acsanm.8b02306

Maung P; Prusty BG; White JM; David M; Phillips AW; St John NA, 2019, 'Structural performance of a shape-adaptive composite hydrofoil using automated fibre placement', Engineering Structures, 183, pp. 351 - 365, http://dx.doi.org/10.1016/j.engstruct.2019.01.014

Banerjee A; Gangadhara Prusty B, 2019, 'Fatigue and fracture behaviour of austenitic-martensitic high carbon steel under high cycle fatigue: An experimental investigation', Materials Science and Engineering A, 749, pp. 79 - 88, http://dx.doi.org/10.1016/j.msea.2019.02.010

Oromiehie E; Das Chakladar N; Rajan G; Prusty BG, 2019, 'Online monitoring and prediction of thermo-mechanics of AFP based thermoplastic composites', Sensors Switzerland, 19, http://dx.doi.org/10.3390/s19061310

Banerjee A; Prusty BG; Bhattacharyya S, 2019, 'Rate-dependent mechanical strength and flow behaviour of dual-phase high carbon steel at elevated temperatures: An experimental investigation', Materials Science and Engineering A, 744, pp. 224 - 234, http://dx.doi.org/10.1016/j.msea.2018.12.002

Jinachandran S; Li H; Xi J; Prusty BG; Semenova Y; Farrell G; Rajan G, 2018, 'Fabrication and characterization of a magnetized metal-encapsulated FBG sensor for structural health monitoring', IEEE Sensors Journal, 18, pp. 8739 - 8746, http://dx.doi.org/10.1109/JSEN.2018.2866803

Pearce GM; Mukkavilli A; Chowdhury N; Lim SH; Prusty G; Crosky A; Kelly D, 2018, 'Strain Invariant Failure Theory – Part 1: An extensible framework for predicting the mechanical performance of fibre reinforced polymer composites', Composite Structures, 209, pp. 1022 - 1034, http://dx.doi.org/10.1016/j.compstruct.2018.03.084

Hossain R; Pahlevani F; Witteveen E; Banerjee A; Joe B; Prusty G; Dippenaar R; Sahajwalla V, 2017, 'Hybrid structure of white layer in high carbon steel – Formation mechanism and its properties', Scientific Reports, 7, pp. 13288, http://dx.doi.org/10.1038/s41598-017-13749-7

Herath MT; Prusty BG; Phillips AW; St. John N, 2017, 'Structural strength and laminate optimization of self-twisting composite hydrofoils using a Genetic Algorithm', Composite Structures, 176, pp. 359 - 378, http://dx.doi.org/10.1016/j.compstruct.2017.05.012

Sul JH; Prusty BG; Crosky A, 2017, 'Effect of the addition of multi-walled carbon nanotubes on the thermomechanical properties of epoxy resin', Polymer Composites, 38, pp. 1873 - 1880, http://dx.doi.org/10.1002/pc.23757

Rajan G; Vinod JS; Moses T; Prusty BG; Xi J, 2017, 'Ballast Breakage Analysis Using FBG Acoustic Emission Measurement System', Geotechnical and Geological Engineering, 35, pp. 1239 - 1247, http://dx.doi.org/10.1007/s10706-017-0165-4

Oromiehie E; Gangadhara Prusty B; Compston P; Rajan G, 2017, 'In-situ simultaneous measurement of strain and temperature in automated fiber placement (AFP) using optical fiber Bragg grating (FBG) sensors', Advanced Manufacturing Polymer and Composites Science, 3, pp. 52 - 61, http://dx.doi.org/10.1080/20550340.2017.1317447

Atthapreyangkul A; Prusty BG, 2017, 'Experimental and numerical analysis on the geometrical parameters towards the maximum SEA of CFRP components', Composite Structures, 164, pp. 229 - 236, http://dx.doi.org/10.1016/j.compstruct.2016.12.078

Oromiehie E; Prusty G; Compston P; Rajan G, 2017, 'Characterization of process-induced defects in automated fiber placement manufacturing of composites using fiber Bragg grating sensors', Structural Health Monitoring, 17, pp. 108 - 117, http://dx.doi.org/10.1177/1475921716685935

Hellier AK; Prusty ; Pearce GM; Reid M; PARADOWSKA ; SIMONS P, 2016, 'Effect of Ultrasonic Peening on Residual Stresses at a T-Butt Weld Toe', Materials Research Proceedings, 2, pp. 19 - 24, http://dx.doi.org/10.21741/9781945291173-4

Subbaramaiah R; Prusty ; Pearce ; Lim SH; Thomson RS, 2016, 'Crashworthy Response of Fibre Metal Laminate Top Hat Structures', Composite Structures, 160, pp. 773 - 781, http://dx.doi.org/10.1016/j.compstruct.2016.10.112

Ni X-Y; Prusty BG; Hellier AK, 2016, 'Buckling and Post-Buckling of isotropic and composite stiffened panels: a review on optimisation (2000-2015)', Transactions of RINA, Part A3: International Journal of Maritime Engineering, 158, pp. A-251 - A-267, http://dx.doi.org/10.3940/rina.ijme.2016.a3.388

Rajan G; Shouha P; Ellakwa A; Bhowmik K; Xi J; Prusty G, 2016, 'Evaluation of the physical properties of dental resin composites using optical fiber sensing technology', Dental Materials, 32, pp. 1113 - 1123, http://dx.doi.org/10.1016/j.dental.2016.06.015

Oromiehie E; Rajan G; prusty G, 2016, 'Thermal sensitivity and relaxation of carbon fibre- foam sandwich composites with fibre optic sensors', Journal of sandwich structures and materials

Oromiehie E; Prusty G; Compston P; Rajan G, 2016, 'In-situ process monitoring for automated fibre placement using fibre Bragg grating sensors', Journal of structural health monitoring, 15, pp. 706 - 714, http://dx.doi.org/10.1177/1475921716658616

Ni XY; Prusty BG; Hellier AK, 2016, 'BUCKLING AND POST-BUCKLING OF ISOTROPIC AND COMPOSITE STIFFENED PANELS: A REVIEW ON OPTIMISATION (2000-2015)', Transactions of the Royal Institution of Naval Architects Part A International Journal of Maritime Engineering, 158, pp. A251 - A267, http://dx.doi.org/10.5750/ijme.v158iA3.994

Kepple J; Herath M; Pearce G; Prusty G; Thomson R; Degenhardt R, 2015, 'Improved stochastic methods for modelling imperfections for buckling analysis of composite cylindrical shells', Engineering Structures, 100, pp. 385 - 398, http://dx.doi.org/10.1016/j.engstruct.2015.06.013

Sul JH; Gangadhara Prusty B; Kelly DW, 2015, 'Molecular dynamics study on effects of aspect ratio of carbon nanotubes in thermosetting epoxy based nanocomposites including modeling of crosslinking process', Advanced Manufacturing Polymer and Composites Science, 1, pp. 94 - 104, http://dx.doi.org/10.1179/2055035914Y.0000000009

Ni X-Y; Prusty BG; Hellier AK, 2015, 'BUCKLING AND POST-BUCKLING OF ISOTROPIC AND COMPOSITE STIFFENED PANELS: A REVIEW ON ANALYSIS AND EXPERIMENT (2000-2012)', Transactions of RINA, Part A1: International Journal of Maritime Engineering, 157, pp. A-9 - A-29, http://dx.doi.org/10.3940/rina.ijme.2015.al.300

Bhowmik K; Peng GD; Ambikairajah E; Lovric V; Walsh WR; Prusty BG; Rajan G, 2015, 'Intrinsic high-sensitivity sensors based on etched single-mode polymer optical fibers', IEEE Photonics Technology Letters, 27, pp. 604 - 607, http://dx.doi.org/10.1109/LPT.2014.2385875

Kepple JI; Herath M; Pearce G; Prusty G, 2015, 'Stochastic analysis of imperfection sensitive composite cylinders using realistic imperfection models', Composite Structures, 126, pp. 159 - 173, http://dx.doi.org/10.1016/j.compstruct.2015.02.063

Herath MT; Prusty BG, 2015, 'Design of shape-adaptive wind turbine blades using Differential Stiffness Bend–Twist coupling', Ocean Engineering, 95, pp. 157 - 165, http://dx.doi.org/10.1016/j.oceaneng.2014.12.010

Herath MT; Natarajan S; Prusty BG; John NS, 2015, 'Isogeometric analysis and genetic algorithm for shape-adaptive composite marine propellers', Computer Methods in Applied Mechanics and Engineering, 284, pp. 835 - 860, http://dx.doi.org/10.1016/j.cma.2014.10.028

Lim SH; Prusty G; Pearce G; Kelly DW; Thomson RS, 2015, 'Study of Magnetorheological Fluids towards Smart Energy Absorption of Composite Structures for Crashworthiness', Mechanics of Advanced Materials and Structures, 23, pp. 538 - 544, http://dx.doi.org/10.1080/15376494.2015.1007187

Ni XY; Prusty BG; Hellier AK, 2015, 'BUCKLING AND POST-BUCKLING OF ISOTROPIC AND COMPOSITE STIFFENED PANELS: A REVIEW ON ANALYSIS AND EXPERIMENT (2000-2012)', Transactions of the Royal Institution of Naval Architects Part A International Journal of Maritime Engineering, 157, pp. A9 - A29, http://dx.doi.org/10.5750/ijme.v157iA1.945

Hou T; Pearce GMK; Prusty BG; Kelly DW; Thomson RS, 2014, 'Pressurised Composite Tubes as Variable Load Energy Absorbers', Composite Structures, http://dx.doi.org/10.1016/j.compstruct.2014.09.060

Sul JH; Prusty BG; Kelly DW, 2014, 'Application of molecular dynamics to evaluate the design performance of low aspect ratio carbon nanotubes in fibre reinforced polymer resin', Composites Part A Applied Science and Manufacturing, 65, pp. 64 - 72, http://dx.doi.org/10.1016/j.compositesa.2014.03.004

Pearce GM; Lim S; Sul JH; Prusty BG; Kelly DW, 2014, 'Atoms to Assemblies: A Physics-Based Hierarchical Modelling Approach for Polymer Composite Components', Applied Mechanics and Materials, 553, pp. 41 - 47, http://dx.doi.org/10.4028/www.scientific.net/AMM.553.41

Khawaja MA; Prusty GB; Ford RAJ; Marcus N; Russell C, 2013, 'Can more become less? Effects of an intensive assessment environment on students' learning performance', European Journal of Engineering Education, 38, pp. 631 - 651, http://dx.doi.org/10.1080/03043797.2013.834295

Yu X; Prusty G; Pan C, 2013, 'Numerical investigations of the mechanical properties of a braided nonvascular stent design using finite element menthod', Computational Materials Science

Back to profile page