By Professor Faz Rahman

Journal articles

Dutta R; Ahsanullah K; Rahman MF, 2014, 'Preliminary Design Analysis of Low Speed Interior Permanent Magnet Machine with Distributed and Concentrated Windings', JICEMS (Journal of International Conference on Electrical Machines and Systems), 2, pp. 139 - 147, http://www.jicems.org/ltkpsweb/pub/pubregistrationview.aspx?ppseq=233&from=pubissue.aspx?puseq=67

Dutta R; Chong L; Rahman MF; Rahman F, 2014, 'Review of the impact of parameter variation on the operating speed range of the interior permanent magnet synchronous machine', Australian Journal of Electrical & Electronic Engineering, 11, pp. 10 - 17, https://www.tandfonline.com/doi/abs/10.7158/1448837X.2014.11464409

You K; Xiao D; Rahman MF; Uddin MN, 2014, 'Applying reduced general direct space vector modulation approach of AC-AC matrix converter theory to achieve direct power factor controlled three-phase AC-DC matrix rectifier', IEEE Transactions on Industry Applications, 50, pp. 2243 - 2257, http://dx.doi.org/10.1109/TIA.2013.2285956

Dutta R; Chong L; Rahman MF, 2013, 'Analysis and experimental verification of losses in a concentrated wound interior permanent magnet machine', Progress In Electromagnetics Research B, 48, pp. 221 - 248, http://www.jpier.org/PIERB/pier.php?paper=12110715

Dutta R; Chong L; Rahman MF, 2013, 'Design and experimental verification of an 18-slot/14-pole fractional-slot concentrated winding interior permanent magnet machine', IEEE Transactions on Energy Conversion, 28, pp. 181 - 190, http://dx.doi.org/10.1109/TEC.2012.2229281

Xiao D; Rahman MF, 2013, 'Sensorless direct torque and flux controlled IPM synchronous machine fed by matrix converter over a wide speed range', IEEE Transactions on Industrial Informatics, 9, pp. 1855 - 1867, http://www.scopus.com/inward/record.url?eid=2-s2.0-84886670952&partnerID=40&md5=9dc2710cb5632ebc8bc21c394851bd7f

Xu Z; Rahman MF, 2012, 'Comparison of a sliding observer and a Kalman filter for direct-torque-controlled IPM synchronous motor drives', IEEE Transactions on Industrial Electronics, 59, pp. 4179 - 4188, http://dx.doi.org/10.1109/TIE.2012.2188252

Xu Z; Rahman MM; Wang G; Xu DX, 2012, 'Performance evaluation of an integrated starter-alternator with an IPM synchronous machine under sensor-less operation', Journal of Power Electronics, 12, pp. 49 - 57, http://dx.doi.org/10.6113/JPE.2012.12.1.49

Dutta R; Rahman MF; Chong GL, 2012, 'Winding Inductances of an Interior Permanent Magnet (IPM) Machine With Fractional Slot Concentrated Winding', IEEE Transactions on Magnetics, 48, pp. 4842 - 4849, http://dx.doi.org/10.1109/TMAG.2012.2203140

Xiao D; Rahman MF, 2011, 'A Novel Hysteresis Direct Torque Control for Matrix Converter Drives', European Power Electronics and Drives EPE Journal, 21, pp. 40 - 48

Rahman MF; Foo GH; Soon , 2010, 'Analysis and Design of the SVM Direct Torque and Flux Controlled IPM Synchronous Motor drive', Australian Journal of Electrical and Electronics Engineering, 7, pp. 21 - 30

Rahman MF; Foo GH, 2010, 'Direct Torque Control of an IPM Synchronous Motor Drive at Very Low Speed Using a Sliding Mode Stator Flux Observer', IEEE Transactions on Power Electronics, 25, pp. 933 - 942

Chong GL; Dutta R; Rahman MF, 2010, 'Electromagnetic Losses in a 1kW Concentric Wound IPM Machine for Field Weakening Applications', Journal of Applied Superconductivity and Electromagnetics (JASEM), 1, pp. 95 - 100, http://association-asem.org/General_Information

Rahman MF; Foo GH; Sayeef SM, 2010, 'Low Speed and Standstill Operation of a Sensorless Direct Torque and Flux controlled IPM Synchronous Motor Drive', IEEE Transactions on Energy Conversion, 25, pp. 25 - 33

Rahman MF; Foo GH; Sayeef SM, 2010, 'Rotor Position and Speed Estimation of a Variable Structure Direct-Torque-Controlled IPM Synchronous Motor Drive at Very Low Speeds Including Standstill', IEEE Transactions on Industrial Electronics, 57, pp. 3715 - 3723, http://dx.doi.org/10.1109/TIE.2010.2041730

Rahman MF; Chong GL, 2010, 'Saliency ratio derivation and optimisation for an interior permanent magnet machine with concentrated windings using finite-element analysis', IET Electric Power Applications, 4, pp. 249 - 258

Rahman MF; Foo GH, 2010, 'Sensorless Direct Torque and Flux Controlled IPM Synchronous Motor Drive at a Very Low Speed Without Signal Injection', IEEE Transactions on Industrial Electronics, 57, pp. 395 - 403, http://dx.doi.org/10.1109/TIE.2009.2030815

Rahman MF; Foo GH, 2010, 'Sensorless Sliding Mode MTPA Control of an IPM Synchronous Motor Drive Using a Sliding Mode Observer and HF Signal Injection', IEEE Transactions on Industrial Electronics, 57, pp. 1270 - 1278

Rahman MF; Foo GH, 2010, 'Sensorless Vector Control of Interior Permanent Magnet Synchronous Motor Drives at Very Low speed Without Signal Injection', IET Electric Power Applications, 4, pp. 131 - 139

Foo G; Rahman MF, 2009, 'Sensorless direct torque and flux controlled interior permanent magnet synchronous motor drive over a wide speed range', Australian Journal of Electrical and Electronics Engineering, 6, pp. 121 - 132, http://dx.doi.org/10.1080/1448837x.2009.11464231

You K; Rahman MF, 2009, 'A matrix-Z-source converter with AC-DC bidirectional power flow for an integrated starter alternator system', IEEE Transactions on Industry Applications, 45, pp. 239 - 248

You K; Rahman MF, 2009, 'Analytical model of conduction and switching losses of matrix-Z-source converter', Journal of Power Electronics, 9, pp. 275 - 287

Chong GL; Dutta RD; Rahman MF, 2009, 'Application of concentrated windings in the interior permanent magnet machine', Australian Journal of Electrical and Electronics Engineering, 5, pp. 229 - 236

Mudannayake CP; Rahman MF, 2009, 'FUTURE AUTOMOTIVE 42-V POWERNET APPLICATION An improved implementation of an induction machine-based integrated starter alternator', IEEE Industry Applications Magazine, 15, pp. 14 - 25

Karanayil BV; Rahman MF; Grantham C, 2009, 'Identification of induction motor parameters in industrial drives with artificial neural networks', Advances in Fuzzy Systems

Rahman MF; Sayeef SM, 2009, 'Improved flux and torque estimators of a direct torque controlled interior PM machine with compensations for dead-time effects and forward voltage drops', Journal of Power Electronics, 9, pp. 438 - 446

Rahman MF; Haque M, 2009, 'Incorporating control trajectories with the direct torque control scheme of interior permanent magnet synchronous motor drive', IET Electric Power Applications, 3, pp. 93 - 101

Rahman MF; Sayeef SM; Foo GH, 2009, 'Rotor Position and Speed Estimation of a Variable Structure Direct Torque Controlled IPM Synchronous Motor Drive at Very Low Speed', Australian Journal of Electrical and Electronics Engineering, 6, pp. 271 - 280, http://search.informit.com.au/documentSummary;dn=166138239542266;res=IELENG

Foo G; Sayeef S; Rahman MF, 2009, 'Sensorless direct torque and flux control of an IPM synchronous motor drive at low speed and standstill', Australian Journal of Electrical and Electronics Engineering, 6, pp. 221 - 232, http://dx.doi.org/10.1080/1448837x.2009.11464240

Foo GH; Rahman MF, 2009, 'Sensorless direct torque and flux controlled interior permanent magnet synchronous motor drive incorporating field weakening', Australian Journal of Electrical and Electronics Engineering, 5, pp. 137 - 148

Rahman MF; Foo GH, 2009, 'Sensorless Direct Torque Controlled IPM Synchronous Motor Drive over a Wide Speed Range', Australian Journal of Electrical and Electronics Engineering, 6

Rahman MF; Skyllas-Kazacos M, 2009, 'Vanadium redox battery: Positive half-cell electrolyte studies', Journal of Power Sources, 189, pp. 1212 - 1219, http://dx.doi.org/10.1016/j.powtdour.2008.12.113

Foo GH; Rahman MF, 2009, 'Wide speed direct torque and flux controlled IPM synchronous motor drive using a combined adaptive sliding mode observer and HF signal injection', Journal of Power Electronics, 9, pp. 582 - 592

Dutta RD; Rahman MF, 2008, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', IEEE Transactions on Energy Conversion, 23, pp. 25 - 33, http://dx.doi.org/10.1109/TEC.2007.905061

Zhang J; Rahman MF, 2007, 'A direct-flux-vector-controlled induction generator with space-vector modulation for integrated starter alternator', IEEE Transactions on Industrial Electronics, 54, pp. 2512 - 2520

Xu Z; Rahman MF, 2007, 'An adaptive sliding stator flux observer for a direct-torque-controlled IPM synchronous motor drive', IEEE Transactions on Industrial Electronics, 54, pp. 2398 - 2406

Dutta RD; Rahman MF, 2007, 'Analysis and comparison of methods for determining d- and q-axes inductances of IPM machines', Australian Journal of Electrical and Electronics Engineering, 3, pp. 189 - 199

Xu Z; Rahman MF, 2007, 'Direct torque and flux regulation of an IPM synchronous motor drive using variable structure control approach', IEEE Transactions on Power Electronics, 22, pp. 2487 - 2498

Karanayil BV; Rahman MF; Grantham C, 2007, 'Online stator and rotor resistance estimation scheme using artificial neural networks for vector controlled speed sensorless induction motor drive', IEEE Transactions on Industrial Electronics, 54, pp. 167 - 176, http://dx.doi.org/10.1109/TIE.2006.888778

Mudannayake CP; Rahman MF, 2007, 'Parameter determination of an induction machine for integrated starter alternator', Australian Journal of Electrical and Electronics Engineering, 3, pp. 91 - 100

Rahman MF; Dutta RD, 2006, 'A comparative analysis of two test methods of measuring d- and q-axes inductances of interior permanent-magnet machine', IEEE Transactions on Magnetics, 42, pp. 3712 - 3718

Chao BC; To HP; Grantham C; Rahman MF, 2006, 'Experimental study on using a high-temperature superconducting inductor for power loss reduction in an active power filter', Journal of Physics: Conference Series 264, 43, pp. 913 - 916

Dutta RD; Rahman MF, 2005, 'Interior Permanent Magnet Generator: Generator of New Millennium', International Energy Journal, 6, pp. 51 - 57

Karanayil BV; Rahman MF; Grantham C, 2005, 'Stator and rotor resistance observers for induction motor drive using fuzzy logic and artificial neural networks', IEEE Transactions on Energy Conversion, 20, pp. 771 - 780, http://dx.doi.org/10.1109/TEC.2005.853761

Tang L; Zhong L; Rahman MF; Hu Y, 2004, 'A Novel Direct Torque Controlled Interior Permanent Magnet Synchronous Machine Drive with Low Ripple in Flux and Torque and Fixed Switching Frequency', IEEE Transactions on Power Electronics, 19, pp. 346 - 354

Karanayil BV; Rahman MF; Grantham C, 2004, 'An implementation of a programmable cascaded low-pass filter for arotor flux synthesizer for an induction motor drive', IEEE Transactions on Power Electronics, 19, pp. 257 - 263

Rahman MF; Tang L, 2004, 'An Improved Flux Linkage Estimator for a Direct Torque Controlled PM Syn Motor Drive', Australian Journal of Electrical and Electronics Engineering, 1, pp. 199 - 205

Rahman MF; Haque ME; Tang L; Zhong L, 2004, 'Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive & their remedies', IEEE Transactions on Industrial Electronics, 51, pp. 799 - 809

Haque ME; Zhong L; Rahman MF, 2003, 'A Sensorless Initial Rotor Position Estimation Scheme for a Direct Torque Controlled Interior Permanent Magnet Synchronous Motor Drive', IEEE Transactions on Power Electronics, 18, pp. 1376 - 1383, http://dx.doi.org/10.1109/TPEL.2003.818869

Hu YW; Tian C; You ZQ; Tang LX; Rahman MF, 2003, 'Direct torque control system and sensorless technique of permanent magnet synchronous motor', Chinese Journal of Aeronautics, 16, pp. 97 - 102, http://dx.doi.org/10.1016/S1000-9361(11)60211-2

Back to profile page