By Associate Professor Sammy Lap Ip Chan

Journal articles

Wang ZM; Liu S; Chan SL; Li CV, 2008, 'Electrochemical characteristics of La-Ni-Al thin films', Journal of Alloys and Compounds, 456, pp. 407 - 412, http://dx.doi.org/10.1016/j.jallcom.2007.02.058

Li CV; Chan SL; Zhou H; Liu S, 2008, 'Electrochemical hydrogen storage in LaNi4.25Al0.75 alloys: A comparative study between film and powder materials', Materials Characterization, 59, pp. 458 - 472

Li CV; Weng W; Wang ZM; Chan SL, 2008, 'Self-discharge behavior of LaNi5-based hydrogen storage electrodes in different electrolytes', Journal of Solid State Electrochemistry, 12, pp. 935 - 940, http://dx.doi.org/10.1007/s10008-008-0517-3

Tsay LW; Young MC; Shin CS; Chan SLI, 2007, 'Hydrogen-enhanced cracking of 2205 duplex stainless steel', Fatigue and Fracture of Engineering Materials and Structures, 30, pp. 1228 - 1236, http://dx.doi.org/10.1111/j.1460-2695.2007.01191.x

Young MC; Tsay LW; Shin CS; Chan SLI, 2007, 'The effect of short time post-weld heat treatment on the fatigue crack growth of 2205 duplex stainless steel welds', International Journal of Fatigue, 29, pp. 2155 - 2162, http://dx.doi.org/10.1016/j.ijfatigue.2007.01.004

Wang Z; Li C; Chan SL, 2007, 'Discharge behavior of MmNi(3.66)(CoAlMn)(1.34) hydrogen storage alloys', Journal of Alloys and Compounds, 438, pp. 298 - 302

Song Q; Aravindaraj G; Sultana H; Chan SL, 2007, 'Performance improvement of pasted nickel electrodes with multi-wall carbon nanotubes for rechargeable nickel batteries', Electrochimica ACTA, 53, pp. 1890 - 1896

Ahmed A; Neely AJ; Shankar K; Chan SL, 2007, 'Tensile behaviour of nano-particulate reinforced aluminium matrix composites at elevated temperature', Materials Science Forum, 561-565, pp. 761 - 764

Song Q; Chiu CH; Chan SLI, 2006, 'Nanocrystalline nickel hydroxide in pasted nickel electrodes for rechargeable nickel batteries', Proceedings of the 2006 International Conference on Nanoscience and Nanotechnology Iconn, pp. 127 - 129, http://dx.doi.org/10.1109/ICONN.2006.340567

Song S; Chiu C; Chan SL, 2006, 'Effects of ball milling on the physical and electrochemical characteristics of nickel hydroxide powder', Journal of Applied Electrochemistry, 36, pp. 97 - 103

Song Q; Chiu C; Chan SL, 2006, 'Performance improvement of pasted nickel electrodes with an addition of ball-milled nickel hydroxide powder', Electrochimica ACTA, 51, pp. 6548 - 6555

Wang ZM; Li V; Chan SL, 2006, 'Review of alloy membranes/film for hydrogen separation or purification', Journal of Rare Earths, 23, pp. 611 - 616

Zhongmin W; Li CV; Huaiying Z; Chan SL; Lui S; Wang ZM, 2006, 'Structural stability of single-layered LaNi4.25Al0.75 film and its electrochemical hydrogen-storage properties', Rare Metals, 25, pp. 543 - 548

Song QS; Tang ZY; Guo HT; Chan SLI, 2005, 'Electrocatalysis for hydrogen evolution reaction on nickel-hydrogen storage alloy composite electrodes prepared by electrodeposition', Tianjin Daxue Xuebao Ziran Kexue Yu Gongcheng Jishu Ban Journal of Tianjin University Science and Technology, 38, pp. 508 - 512

Lin Z; Chan SL; Mohamed FA, 2005, 'Effect of nano-scale particles on the creep behavior of 2014 Al', Materials Science and Engineering A, 394, pp. 103 - 111, http://dx.doi.org/10.1016/j.msea.2004.11.034

Young MC; Chan SL; Tsay L; Shin C, 2005, 'Hydrogen-enhanced cracking of 2205 duplex stainless steel welds', Materials Chemistry and Physics, 91, pp. 21 - 27

Song Q; Li YY; Chan SL, 2005, 'Physical and electrochemical characteristics of nanostructured nickel hydroxide powder', Journal of Applied Electrochemistry, 35, pp. 157 - 162

Wang Z; Li VS; Chan SL, 2005, 'Review of alloy membranes/film for hydrogen separation or purification', Journal of Rare Earths, 23, pp. 611 - 616

Huang JC; Shin CS; Chan SLI, 2004, 'Effect of temper, specimen orientation and test temperature on tensile and fatigue properties of wrought and PM AA6061-alloys', International Journal of Fatigue, 26, pp. 691 - 703, http://dx.doi.org/10.1016/j.ijfatigue.2003.11.006

Song QS; Tang ZY; Guo HT; Chan SLI, 2004, 'Electroless Co-Zn surface-modified nickel hydroxide as an active material for pasted nickel electrodes', Transactions of Tianjin University, 10, pp. 47 - 53

Ma N; Yau E; Aravind M; Ng DH; Chan SL, 2004, 'Formation of Mg2Ni nanofibres in a Mg-based Metal Matrix Composite', Philosophical Magazine, 84, pp. 3771 - 3784

Chan SL; Kang Y, 2004, 'Tensile Properties of Nanometric Al2O3 Particulate-reinforced Aluminium Matrix Composites', Materials Chemistry and Physics, 85, pp. 438 - 443

Ng DHL; Cho KS; Wong ML; Chan SLI; Ma XY; Lo CCH, 2003, 'Study of microstructure, mechanical properties, and magnetization process in low carbon steel bars by Barkhausen emission', Materials Science and Engineering A, 358, pp. 186 - 198, http://dx.doi.org/10.1016/S0921-5093(03)00295-8

Wang SH; Chiang CC; Chan SLI, 2003, 'Effect of initial microstructure on the creep behavior of TMCP EH36 and SM490C steels', Materials Science and Engineering A, 344, pp. 288 - 295, http://dx.doi.org/10.1016/S0921-5093(02)00425-2

Ma NG; Deng CJ; Yu P; Kwok WY; Aravind M; Ng DHL; Chan SLI, 2003, 'Formation of Mg-Mg2Cu nanostructured eutectic in Mg-based metal matrix composite', Journal of Materials Research, 18, pp. 1934 - 1942, http://dx.doi.org/10.1557/JMR.2003.0269

Song Q; Tang Z; Guo H; Chan SLI, 2002, 'Structural characteristics of nickel hydroxide synthesized by a chemical precipitation route under different pH values', Journal of Power Sources, 112, pp. 428 - 434, http://dx.doi.org/10.1016/S0378-7753(02)00396-8

Wang SH; Chiang CC; Chan SLI, 2002, 'Effect of microstructural texture on the creep behavior', Journal of Materials Science, 37, pp. 3733 - 3737, http://dx.doi.org/10.1023/A:1016573628007

Huang S; Chuang H; Chan SL, 2002, 'Effects of fluorination on the hydriding and electrochemical properties of a gas-atomized Zr-based hydrogen storage alloy', Journal of Alloys and Compounds, 330-332, pp. 617 - 621, http://dx.doi.org/10.1016/S0925-8388(01)01457-8

Chuang HJ; Chan SLI, 2001, 'Effect of Ni encapsulation on the properties of Ti-Zr-based hydrogen storage alloys', Journal of Alloys and Compounds, 314, pp. 224 - 231, http://dx.doi.org/10.1016/S0925-8388(00)01193-2

Ng DHL; Cheng K; Cho KS; Ren ZY; Ma XY; Chan SLI, 2001, 'Nondestructive evaluation of carbon contents and microstructures in plain carbon steel bars by Barkhausen emission', IEEE Transactions on Magnetics, 37, pp. 2734 - 2736, http://dx.doi.org/10.1109/20.951290

Tsay LW; Chen YC; Chan SLI, 2001, 'Sulfide stress corrosion cracking and fatigue crack growth of welded TMCP API 5L X65 pipe-line steel', International Journal of Fatigue, 23, pp. 103 - 113, http://dx.doi.org/10.1016/S0142-1123(00)00081-5

Martínez-Madrid M; Chan SLI; Charles JA; López JAL; Castaño V, 2000, 'Effect of grain size and second phase particles on the hydrogen occlusivity of iron and steels', Materials Research Innovations, 3, pp. 263 - 270, http://dx.doi.org/10.1007/s100190000043

Chuang HJ; Chen SY; Chan SLI, 1999, 'Corrosion and hydrogen damage resistance of stainless steels in Ni/MHx batteries', Corrosion Science, 41, pp. 1347 - 1358, http://dx.doi.org/10.1016/S0010-938X(98)00189-9

Chuang HJ; Huang SS; Ma CY; Chan SLI, 1999, 'Effect of annealing heat treatment on an atomized AB2 hydrogen storage alloy', Journal of Alloys and Compounds, 285, pp. 284 - 291, http://dx.doi.org/10.1016/S0925-8388(98)01050-0

Chan SLI, 1999, 'Hydrogen trapping ability of steels with different microstructures', Journal of the Chinese Institute of Engineers Transactions of the Chinese Institute of Engineers Series A Chung Kuo Kung Ch Eng Hsuch K an, 22, pp. 43 - 53, http://dx.doi.org/10.1080/02533839.1999.9670440

Chuang HJ; Chan SLI, 1999, 'Study of the performance of Ti-Zr based hydrogen storage alloys', Journal of Power Sources, 77, pp. 159 - 163, http://dx.doi.org/10.1016/S0378-7753(98)00189-X

Chan SLI; Chiang CI, 1997, 'Hydrogen permeability and diffusivity in amorphous Metglas 2826MB under AC excitation', Journal of Alloys and Compounds, 253-254, pp. 370 - 373, http://dx.doi.org/10.1016/S0925-8388(96)02906-4

Tau L; Chan SLI, 1996, 'Effects of ferrite/pearlite alignment on the hydrogen permeation in a AISI 4130 steel', Materials Letters, 29, pp. 143 - 147, http://dx.doi.org/10.1016/S0167-577X(96)00140-1

Tau L; Chan SLI; Shin CS, 1996, 'Hydrogen enhanced fatigue crack propagation of bainitic and tempered martensitic steels', Corrosion Science, 38, pp. 2049 - 2060, http://dx.doi.org/10.1016/S0010-938X(96)89123-2

Tsay LW; Chen C; Chan SLI, 1995, 'Effect of ageing treatment on the microstructures and properties of T-250 laser welds', International Journal of Materials and Product Technology, 10, pp. 132 - 142

Lee HL; Lap-Ip Chan S, 1993, 'Abrasive wear of aged 2014 and 6061 aluminium alloy composites', Journal of Materials Science Letters, 12, pp. 476 - 477, http://dx.doi.org/10.1007/BF00452799

Huei-Long L; Wun-Hwa L; Sammy Lap-Ip Chan , 1992, 'Abrasive wear of powder metallurgy Al alloy 6061-SiC particle composites', Wear, 159, pp. 223 - 231, http://dx.doi.org/10.1016/0043-1648(92)90305-R

Lee HL; Lu WH; Chan SLI, 1992, 'Aging behavior of powder metallurgy composite', Scripta Metallurgica Et Materiala, 26, pp. 1723 - 1726, http://dx.doi.org/10.1016/0956-716X(92)90541-L

Huei-Long L; Wun-Hwa L; Sammy Lap-Ip Chan , 1992, 'Effect of aging on the sliding abrasive wear of P M 2014 and 6061 Al alloy-SiC particle composites', Materials Letters, 15, pp. 49 - 52, http://dx.doi.org/10.1016/0167-577X(92)90011-8

Lee HL; Lap-Ip Chan S, 1991, 'Hydrogen embrittlement of AISI 4130 steel with an alternate ferrite/pearlite banded structure', Materials Science and Engineering A, 142, pp. 193 - 201, http://dx.doi.org/10.1016/0921-5093(91)90658-A

Lee HL; Lu WH; Chan SLI, 1991, 'Effect of cold rolling on the aging kinetics of Al2O3 6061 Al composite by differential scanning calorimetric technique', Scripta Metallurgica Et Materiala, 25, pp. 2165 - 2170, http://dx.doi.org/10.1016/0956-716X(91)90293-A

Chan SLI; Lee HL; Yang JR, 1991, 'Effect of retained austenite on the hydrogen content and effective diffusivity of martensitic structure', Metallurgical Transactions A Physical Metallurgy and Materials Science, 22 A, pp. 2579 - 2586, http://dx.doi.org/10.1007/BF02851351

Lee HL; Chan SLI, 1991, 'Hydrogen embrittlement of AISI 4130 steel with an alternate ferrite/pearlite banded structure',

Lee HL; Chan SLI, 1991, 'Hydrogen embrittlement of AISI 4130 steel with an alternate ferrite/pearlite banded structure', undefined, 142, pp. 193 - 201, http://dx.doi.org/10.1016/0921-5093(91)90658-a

Chan SLI; Charles JA, 1986, 'Effect of carbon content on hydrogen occlusivity and embrittlement of ferrite–pearlite steels', Materials Science and Technology United Kingdom, 2, pp. 956 - 962, http://dx.doi.org/10.1179/mst.1986.2.9.956

Back to profile page